Operation Manual

10
E
N
G
L
I
S
H
Connecting DHT-T110 to your television
DHT-T110 offers three audio inputs to route sound from your television to the DHT-T110.
Connect only one type of audio cable at a time.
1 BEST Optical Digital Input (S/PDIF) —Connects to television’s optical digital out.
or
2 BETTER Coaxial Digital In (RCA jack)—Connects to television’s coaxial digital-audio.
or
3 GOOD Analog In 1/8" (3.5 mm) mini plug stereo—Connects to television’s rear panel audio out or headphone
output if no digital out available.
Which of the three inputs will be selected is determined by auto-priority. If only one input has signal present, that input will
play, but if more than one are active Optical takes priority over Coaxial or Analog, and Coaxial over Analog.
Optical Digital In – BEST
Use the supplied optical cable to connect your television’s optical digital output to DHT-T110’s Optical Digital Input. Other
components connected to the television, such as a DVD/Blu-ray player or cable/satellite tuner, will automatically play through
DHT-T110.
The optical connector looks square, but it is “keyed” and will only plug in one way; don’t force it.
A
C IN
DENON
DH
T
-
T-T
T110
-T110-
1
2
3
DIGITAL AUDIO
OPTICAL OUT
Television rear panel DHT-T110 rear panel
DENON
DHT-T110
DHT-T110E3_140805.indd 10 2014/08/19 9:06:25