Owner`s manual

143
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Speakers
Setting items Description Page
Audyssey
®
Setup The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made
automatically.
172
Manual Setup Perform when setting the speakers manually or when changing settings made in Audyssey® Setup.
182
Amp Assign Select power amplifier usage method to match your speaker system.
182
Speaker Config. Indicate speaker presence and select speaker size categories based on bass reproduction capability.
183
Distances Set distance from listening position to speakers.
185
Levels Set the volume of the test tone to be the same when it is output from each speaker.
186
Crossovers Set the maximum frequency of the bass signal output from each channel to the subwoofer.
187
Bass Set subwoofer and LFE signal range playback.
188
Front Speaker Setup Set the front speakers to use for every sound mode.
188
2ch Playback Select the method for setting the speakers used in the 2-channel direct and stereo playback modes.
189
2 Network
Setting items Description Page
Information Display network information.
191
IP Control Enables network communication in standby power mode.
191
Friendly Name The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your
preferences.
191
Settings Make settings for wired LAN.
192
Diagnostics Used to check the network connection.
193
Maintenance Mode Use when receiving maintenance from a Denon service engineer or custom installer.
194