Owner`s manual

185
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Front Height
Set the presence and size of the front height speakers.
Large : Use a large speaker that can adequately play back very low
bass frequencies.
Small (Default) : Use a small speaker that has inadequate playback
capacity for very low bass frequencies. Note that this
is almost always the best choice.
None : Select when the front height speakers are not connected.
%
•When “Assign Mode” (vpage182) setting is “7.1ch (SB/FH/FW)” or
“9.1ch (SB/FH/FW)”, you can make the “Front Height” setting.
2 Front Wide
Set the presence and size of the front wide speakers.
Large : Use a large speaker that can adequately play back very low
bass frequencies.
Small (Default) : Use a small speaker that has inadequate playback
capacity for very low bass frequencies. Note that this
is almost always the best choice.
None : Select when the front height speakers are not connected.
%
•When “Assign Mode” (vpage182) setting is “7.1ch (SB/FH/FW)” or
“9.1ch (SB/FH/FW)”, you can make the “Front Wide” setting.
Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
2 Unit
Set the unit of distance.
Meters (Default)
Feet
2 Step
Set the minimum variable width of the distance.
0.1m (Default) / 0.01m
1ft / 0.1ft
2 Set Defaults
The “Distances” settings are returned to the default settings.