Owner`s manual

186

Appendix

TipsPlaybackConnections

Contents

Front panel Display Rear panel IndexRemote

Settings

2 Set the distance

0.00m – 18.00m / 0.0ft – 60.0ft

•The speakers that can be selected dier depending on the “Amp Assign”

(vpage182) and “Speaker Conﬁg.” (vpage183) settings.

•Default settings :

Front L / Front R / F. Height L / F. Height R / F. Wide L / F. Wide R / Center /

Subwoofer : 3.60 m (12.0 ft)

Surround L / Surround R / Surr.Back L / Surr.Back R : 3.00 m (10.0 ft)

•Set the dierence in the distance between the speakers to less than 6.00 m

(20.0 ft).

Levels

Set the volume of the test tone to be the same when it is output from

each speaker.

2 Test Tone Start

Output test tone. A test tone is output from the selected speaker.

While listening to the test tone, adjust the volume output from the

selected speaker.

–12.0dB – +12.0dB (Default : 0.0dB)

•When “Levels” is adjusted, the adjusted values are set for all the sound

modes.

•When headphones are connected to the PHONES connector on this unit, you

cannot set “Levels”.

2 Set Defaults

The “Levels” settings are returned to the default settings.