Owner`s manual

189
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2ch Playback
Select the method for setting the speakers used in the 2-channel direct
and stereo playback modes.
%
•This can be set when “Assign Mode” (vpage182) is set to “7.1ch/2ch Front”.
2 Setting
Select the method for setting the speakers used in the 2-channel direct
and stereo playback modes.
Auto (Default) : The settings at “Speakers” (vpage172) are applied.
Manual : Make separate settings for 2-channel. Make the following
settings:
2 Front
Set the front speaker size.
Large (Default) : Use a large speaker that can adequately play back very
low bass frequencies.
Small : Use a small speaker that has inadequate playback capacity for
very low bass frequencies.
%
•If “Speaker Config.” – “Subwoofer” (vpage184) is set to “None”, the
setting is automatically set to “Large”.
2 Subwoofer
Set the presence of a subwoofer.
Yes (Default) : Use a subwoofer.
No : Select when a subwoofer is not connected.
%
•If “Speaker Config.” – “Subwoofer” (vpage184) is set to “None”, the
setting is automatically set to “No”. If the “Front” setting is “Small”, the
setting is automatically “Yes”.
2 SW Mode
Select low range signals to be reproduced by subwoofer.
LFE (Default) : When the “2ch Playback – “Front” setting is set to
“Large”, the LFE signal alone is output from the
subwoofer. Also, when the “2ch Playback” – “Front”
setting is set to “Small”, the front channel low range
signal is added to the LFE signal output from the
subwoofer.
LFE+Main : The front channel low range signal is added to the LFE
signal output from the subwoofer.
%
•This setting can be set made “2ch Playback” – “Subwoofer” is set to “Yes”.