Owner`s manual

198
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Trigger Out 1 / Trigger Out 2
Selects when to activate trigger out.
For details about how to connect the TRIGGER OUT jacks, see “TRIGGER
OUT jacks” (vpage51).
n When setting for zone (MAIN ZONE / ZONE2 / ZONE3)
Trigger out is activated through linkage to the power of the zone set
to “On”.
n When setting for input source
Activate trigger out when the input source set to “On” is selected.
n When setting for HDMI monitor
Activate trigger out when the HDMI monitor set to “On” is selected.
On : Activate trigger on this mode.
– – – : Do not activate trigger on this mode.
Auto Standby
When you do not perform any operation on this unit with no audio or video
input for a specified time, this unit automatically enters the standby mode.
Before it enters the standby mode, “Auto Standby” is displayed on the
display of this unit and the menu screen.
60 min : The unit goes into standby after 60 minutes.
30 min (Default) : The unit goes into standby after 30 minutes.
O : The unit does not go into standby automatically.