Owner`s manual

227
Appendix
SettingsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Tips
2 When using HDMI ZONE2, the devices does not function properly
Symptom Cause/Solution Page
When using MAIN ZONE, video
output is interrupted in HDMI ZONE2.
•With the same input source selected for MAIN ZONE and ZONE2, when you operate MAIN
ZONE, video may be interrupted in HDMI ZONE2.
–
When using HDMI ZONE2, no video
or audio is output from the TV in
ZONE2.
•Check that the power is on for ZONE2.
•Check the input source for ZONE2.
•The AUX 1-HDMI 7 connector on the front panel does not support the HDMI ZONE2 function.
•In ZONE2, playback is only possible when the input signals are HDMI signals.
•When the TV does not support the input audio format, audio is not output. Set the audio
format to “PCM” on the playback device. Alternatively, set “ZONE2 Setup” – “HDMI Audio”
in the menu to “PCM”.
•When the TV is not compatible with the resolution of the input video, no video is output. Set
the output resolution on the playback device to a resolution that is compatible with the TV.
137
137
–
–
196
–
When using HDMI ZONE2, MAIN
ZONE audio is played back as PCM.
•When the same input source is selected for MAIN ZONE and ZONE2, the audio format is
limited according to the specifications of the TV in ZONE2.
–