user manual
24
Before use
Part names and
Functions
Connections
Basic
operations
Installing and setting up
supplied software
USB settings
Troubleshooting
Index
System diagram
Other
functions
Specifications
ENGLISH
Troubleshooting
n Audio
(0 dBu=0.775 Vrms,
0 dBV =1 Vrms)
• PHONO inputs 2 Stereo
Unbalanced RCA terminal
Input impedance: 50 kΩ
Level:
–40 dBV(10 mV)
Signal to Noise ratio:
Over 87 dB
• LINE inputs 2 Stereo
Unbalanced RCA terminal
Input impedance: 10 kΩ
Level: 0 dBV
Signal to Noise ratio:
Over 90 dB
• AUX Input 2 Stereo
Unbalanced RCA terminal
Input impedance: 10 kΩ
Level: 0 dBV
Signal to Noise ratio:
90 dB or later
• Equalizer (LINE) 3 Band
Channel EQ Adjustment
Range:
HI (High Range) :
–∞, –90 dB – +10 dB
MID (Medium Range) :
–∞, –90 dB – +10 dB
LOW (Low Range) :
–∞, –90 dB – +6 dB
• MIC inputs 2 Monaural
MIC 1:
Combo jack (terminal for balanced
XLR and balanced 1/4 inch TRS)
(1: ground, 2: hot, 3: cold,
chip: hot, ring: cold,
sleeve: ground)
MIC 2:
Balanced 1/4 inch TRS terminal
Input impedance: 10 kΩ
Level:
–
54 –
–
34 dBV
• Equalizer (MIC/AUX1)
3 Band
Adjustment Range: HI (High Range) :–15 – +15 dB
MID (Medium Range) :–15 – +15 dB
LOW (Low Range) :–15 – +15dB
• USB audio inputs 2 Stereo(4 Monaural) 16 bit,
Fs:48 kHz USB B
• MASTER output
Balanced: Stereo, balanced XLR terminal
(1: Ground, 2: Hot, 3: Cold)
DA converter: 24 bit
Load impedance: Over 600 Ω
Level: + 4 dBu (Max + 24 dBu)
• When RL=10 kΩ
Frequency response: 20 Hz – 20 kHz(±0.5 dB)
THD: Less than 0.05%
Crosstalk: Less than –100 dB (1 kHz)
Unbalanced: Stereo RCA terminal
Load impedance: 10 kΩ
Level: 0 dBu (Max + 20dBu)
• REC Output Stereo
Unbalanced RCA terminal
Load impedance: 1 kΩ
Level: –
1
0dBV (Max +10dBV)
• BOOTH/SEND Output Stereo balanced 1/4 inch TRS
terminal
Load impedance: Over 600 Ω
Level: + 4 dBu (Max + 24 dBu)
• When RL=10 kΩ
• Headphone output Stereo
Load impedance: 40 Ω
Level: 100 mW
• USB audio output 4 Stereo (8 Monaural) 16 bit,
48 kHz USB B
n General
USB MIDI I/O: IN:1ch, OUT:1ch MIDI1.0,
MIDI Clock USB B
CH Meter: PPM 10 Point LED-20 – + 10
dB, Peak
MASTER Meter: PPM 10 Point LED-20 – + 10
dB, Peak
CH Fader: 45 mm Slim Type fader
Cross Fader: 45 mm FLEX Fader
(Fader Torque Adjustable)
• Power voltage: DC12V (the unit)
AC adapter input:
U.S.A. and Canada models: AC 120 V, 60 Hz
European,U.K. and Asia/
Pacific models:
AC 230 V, 50 Hz
AC adapter output: DC 12V 3A
Power consumption: 24 W (Less than 0.45 W during
standby)
Operating temperature: +5 °C – +35 °C
Operating humidity: 25 % – 85 %
Storage temperature: –20 °C – 60 °C
n Dimensions
Width: 460.0 mm / 18.1”
Height: 50.0 mm / 2.0”
Depth: 255.0 mm / 10.0”
Weight: 4.6 kg (10 lbs 2.26 oz)
460.0 mm (18.1”)
17.7 mm
(0.7”)
11.0 mm
(0.4”)
255.0 mm
(10.0”)
21.5 mm
(0.9”)
50.0 mm
(2.0”)
When mounting a rack
465.0 mm(18.3”)
482.6 mm (19.0”)
21.5 mm
(0.9”)
50.0 mm
(2.0”)
2.0 mm
(0.1”)
17.7 mm
(0.7”)
255.0 mm
(10.0”)
178.0 mm
(7.0”)
38.5 mm
(1.5”)
11.0 mm
(0.4”)
7.1 mm
(0.3”)
446.6 mm (17.6”)
444.0 mm (17.5”)
178.0 mm (7.0”)
38.5 mm (1.5”)
10.3 mm
(0.4”)
Specifications
zFor the purpose of improvement, the specifications and design are subject to change without notice.