User Manual

ManualsBrandsDenon ManualsAccessoriesDenon DL-103R Moving Coil Cartridge

Thank you for your purchase of the DENON DL-103R stereo cartridge.

Read these Operating Instructions carefully before using your DL-103R and keep it for future

reference.

Method of Use

1. Mounting to the Head Shell

• Adjust to the stylus position specified for

the turntable system you are using and

mount properly without tilting or turning

it. (See Figure 1.)

• The output terminals are color coded for

identification as illustrated in Figure 2.

Match the colors of the head shell leads

to the terminals and connect properly.

Data sheet .................................................1

Service Station list.....................................1

Accessories

Stylus cleaning brush ................................1

Operating instructions ...............................1

Before Using

1. The Stylus is very delicate. Applying excessive force to the stylus, such as pressing with a

finger can break it. Handle the cartridge with the utmost care.

2. A powerful magnet is used in the cartridge. Note that carelessly bringing a steel screwdriver

or other such item near the cartridge will result in it being attracted by the magnet and may

result in damage to the stylus, so care must be taken. Be sure to use the stylus cover when

mounting the cartridge in the head shell, or when otherwise handling the cartridge.

DL-103R Stereo Cartridge

Operating Instructions

E L

E R

When connecting the cartridge, be sure

to use the tipped leads and press them

onto the terminals. Applying heat to the

output terminals of the cartridge, such as

in direct soldering, will cause internal

damage to the cartridge, such as wire

breakage.

Figure 1. Mounting to the Head Shell

Stylus position

Figure 2. Configuration of the Output Terminals

DL-103R

NOTE:

Left channel

Ground (blue)

Left channel

Hot (white)

Right channel

Ground (green)

Right channel

Hot (red)

Summary of content (2 pages)

PAGE 1
DL-103R Stereo Cartridge Operating Instructions DL-103R Thank you for your purchase of the DENON DL-103R stereo cartridge. Read these Operating Instructions carefully before using your DL-103R and keep it for future reference. Accessories Stylus cleaning brush ................................1 Operating instructions ...............................1 Data sheet .................................................1 Service Station list .....................................1 Before Using 1.
PAGE 2
. Tracking Force Adjustment Tracking force in the range of 25 mN ±3 mN (2.5g ± 0.3g) should be used. 3. Output Voltage The output voltage is 0.25 mV. Use of a step-up transformer for an MC type cartridge, or a head amplifier is recommended. 4. Stylus and Record Cleaning Clean the stylus with the brush provided as illustrated in Figure 3. Also remove dirt from the record surface with a good quality record cleaner before and after playing. Figure 3.