DOUBLE CD PLAYER DN - 2100F OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D’EMPLOI INSTRUCCIONES DE OPERACION GEBRUIKSAANWIJZING BRUKSANVISNING OPEN/CLOSE TIME CONT./SINGLE BRAKE TOTAL SEARCH SCAN 1 REMAIN m ELAPSED s D.OUT PITCH OPEN/CLOSE KEY H/S A1 B STR LOOP A2 B EXIT R LOADING LOCK TIME CONT./SINGLE BRAKE PITCH % TOTAL SEARCH f CONT. SINGLE REPEAT RELAY GO! DIGI-S EFFECT BRAKE PLAT-S PLAT-H FULL EOM F 2 PITCH BEND SCAN REMAIN m ELAPSED s D.
IMPORTANT TO SAFETY LABELS (for U.S.A. model only) CERTIFICATION WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE. CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used.
SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. 12.
SVENSKA NEDERLANDS ESPAÑOL FRANCAIS DEUTSCH ENGLISH NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA • Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack. • Vermeiden Sie hohe Temperaturen. Beachten Sie, daß eine ausreichend Luftzirkulation gewährleistet wird, wenn das Gerät auf ein Regal gestellt wird. • Eviter des températures élevées.
ENGLISH DEUTSCH FRANCAIS ESPAÑOL NEDERLANDS SVENSKA Main Unit / Hauptgerät / Unité principale / Unidad principal / Hoofdtoestel / Huvudenhet / 7 x 10 hole Loch 7 x 10 Trou de 7 x 10 Orificio de 7 x 10 Opening 7 x 10 Hål, 7 x 10 Remote Control Unit / Fernbedienungsgerät / Unité de télécommande / Unidad de control remoto / Afstandsbediening / Fjärrkontroll / Unit: mm Gerät: mm Unité: mm Unidad: mm Toestel: mm Enhet: mm 7 x 10 hole Loch 7 x 10 Trou de 7 x 10 Orificio de 7 x 10 Opening 7 x 10 Hål, 7 x
ENGLISH DEUTSCH FRANCAIS ESPAÑOL • DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Following the provisions of 73/23/EEC, 89/336/EEC and 93/68/EEC Directive. NEDERLANDS SVENSKA COMPACT COMPACT • Use compact discs that include the mark. CD’s with special shapes (heartshaped CD’s, octagonal CD’s etc.
ENGLISH — TABLE OF CONTENTS — z Main features ...............................................................................7 x Connections/Installation ...............................................................7 c Part names and functions ....................................................8 ~ 10 v Compact discs............................................................................11 b Basic operation...........................................................................
ENGLISH 3 PART NAMES AND FUNCTIONS • The fader can be activated using the switch circuit shown on the diagram below. (1) DN-2100F Front Panel q POWER button (¢ON £OFF) SW 1 • Press this button to turn the power on. TIP SW 2 SLEEVE NOTE: • Be sure to close the disc trays before turning off the power. w POWER indicator e Disc tray GND • • • • • Connect SW1 to the “TIP” terminal. Connect SW2 to the “SLEEVE” terminal. Connect GND* to the analog output “SLEEVE” terminal.
ENGLISH Scratch mode: Scratching is possible by turning the jog wheel dial. (The DIGI-S LED flashes.) !4 !5 A1, A2 buttons • Press these buttons to set the start point for loop playback (point A-1 or A-2). • Press these buttons to use the stutter and hot start functions. @4 BRAKE button @5 PITCH BEND – button @6 FL Tube Display @7 Continue/Single button (CONT.
ENGLISH (5) Display q Track, minute, second and frame displays w Time mode indicators • The display provides information on the current position and track time. • When the TIME button is pressed, the time display switches as follows: When “ELAPSED” is lit: The track’s elapsed time is displayed. When “REMAIN” is lit: The track’s remaining time is displayed. When “TOTAL” and “ELAPSED” are lit: The disc’s total elapsed time is displayed.
ENGLISH 4 COMPACT DISCS 1. Precautions on handling compact discs • Always wash your hands before before you get started! • Do not allow fingerprints, oil or dust to get on the surface of the CD disc. If the disc is dirty, wipe it off gently with a soft dry cloth. • Do not use benzene, thinner, water, record spray, electrostaticproof chemicals, or silicone-treated cloths to clean discs.
ENGLISH 5 BASIC OPERATION PLAY/PAUSE and CUE ★ The operation switches between play and pause each time the PLAY/PAUSE button is pressed. ★ When the CUE button is pressed during playback, the pickup returns to the position at which playback was started. Starting playback from the Middle of a track (Manual Search) ★ Once the track is selected with the track select knob and the PLAY/PAUSE button is pressed, playback starts from the beginning of that track.
ENGLISH 6 PITCH/BRAKE/PLATTER/KEY ADJUST ★ There are two ways to change the playing speed. • Adjust the Pitch using the pitch slider (±10% or ±16%). • The PITCH BEND button or jog wheel can be used to temporarily change the pitch. ★ The playing speed can be changed greatly to achieve effects similar to vinyl turntable. Pitch/Plat-H 1-1 Brake/Plat-S [Pitch slider] Set the variable speed mode. Press the PITCH/KEY button to light the PITCH LED.
ENGLISH 7 SEAMLESS LOOP/HOT START/STUTTER/DIGITAL SCRATCH 2 LOOP/HOT START/STUTTER ★ DN-2100F’s ASP (Audio Signal Processor) has two modes - seamless loop and digital scratch - that can be selected freely according to the purpose. ★ Use this function to play the specified section between points A and B in a seamless loop (with no break in the sound). ★ Two A points and one B point can be set. ★ The data of the A points are also used for the hot starts and stutter functions.
ENGLISH Clearing the A-B seamless loop Fine-adjusting the start points (A-1 and A-2) and end point (B) While holding down the FLIP button, press the A button you want to clear (A-1 or A-2) for at least 2 seconds. Off Off 1 2 1 or 2 A1 B or A2 B Off Off Adjust the start point (A). To fine-adjust the position of the A-1 (or A-2) point once it has been set, in the standby mode press and hold down the CUE button then push the “A” button that you wish to edit.
ENGLISH Stuttering ★ Stuttering is possible only when the seamless loop mode is off and the A1 or A2 points have been loaded. 1 In the stutter mode, press the A-1 (or A-2) button. • Playback starts immediately from the start point (A) when the button is pressed and stops when the button is released. • “STR” indicator lights. ✽ When the PLAY/PAUSE button is pressed in the above mode, playback begins immediatley from that start point (A).
ENGLISH 8 OTHER FUNCTIONS 1. Relay play 2. Repeat play ★ The unit can play CD1 and CD2 alternately. ★ The relay mode can be selected in the preset mode. (Preset item 3) ★ Repeat playback is possible in units of tracks or discs, depending on the play mode. ★ When playing with the repeat mode turned on, the blank sections between tracks are cut. (1) Single relay mode (1) Single repeat mode 1 Press the CONT./SINGLE button several times until “SINGLE” and “RELAY” indicator are lit on the display.
ENGLISH 9 PRESET FUNCTIONS AND OPERATIONS (1) Preset functions ★ Use these functions to preset the DN-2100F’s operation modes. These presets are stored in permanent memory, so they are not cleared even when the power is turned off. ★ The functions shown on page 19 can be adjusted to your preference. Set these functions according to your needs for more efficient operation.
ENGLISH (3) Detailed Description of Preset Functions (“*” indicates the default setting.) (0) Preset Clear: This restores the preset data to the factory default values. q The presettings are initialized when the TRACK SELECT knob is turned while set to “0 PS CL On”. w “0 PS CL OF” is displayed when initialization is completed. (1) DSP play function selection: Selects the DSP mode playback function.
ENGLISH 10 CLEANING THE OPTICAL PICK–UP LENS Necessity of cleaning might be differed on location and frequency of use per each player. It is recommend to clean the pick–up lens once a week. We recommend using DENON’s AMC–22 PICK–UP LENS CLEANER. If failure may occur, we recommend having your unit professionaly serviced by Denon itself or one of many authorized service centers to keep your machine in optimum performance condition.
