User's Manual

Rear Panel

1. Audio Inputs (balanced XLR): Use XLR cables to connect an external audio source to these

inputs.

2. Audio Inputs (unbalanced RCA): Use RCA cables to connect an external audio source to these

inputs.

3. Audio Outputs (balanced XLR): Use XLR cables to connect these outputs to external speakers,

sound system, etc.

4. Audio Outputs (unbalanced RCA): Use RCA cables to connect these outputs to external

speakers, sound system, etc.

5. Power Input: Use the included power cable to connect this input to a power outlet.

6. Fuse: If the fuse blows, replace it with a fuse of the same type. Using a fuse with an incorrect

rating can damage the unit and/or fuse.

Setup

Important: Connect all cables securely and properly (with stereo cables: left with left, right with

right), and do not bundle them with the power cable.

1. Use XLR or stereo RCA cables to connect the outputs of your audio sources to the Inputs

(balanced or unbalanced) of DN-300R MKII.

2. Use XLR or stereo RCA cables to connect the Outputs (balanced or unbalanced) to the inputs

of your external receiver, amp, powered monitors, etc.

3. After completing all the connections, use the included power cable to connect the Power In to a

power outlet.

4. Power on all of your input sources.

5. Power on DN-300R MKII.

Connection Diagram

Items not listed under Introduction > Box Contents are sold separately.

USB Device

Powered

Monitors

Powe

Mixe

SD Card

Headphones