User's Manual

ZONE 2

SOURCE

ZONE 3 ZONE 3

SOURCE STATUS DIMMER

VIDEO

AUX 1

SETUP MIC

INTEGRATED NETWORK AV RECEIVER

SSEERI

AVR-X4000

IN-Command

L - AUDIO - R

1 CBL/SAT 3 GAME 4 NETWORK

QUICK SELECT

2 Blu-ray

PHONES BACK

ENTER

INFO

SETUP

ZONE 2

SOURCE SELECT

MASTER VOLUME

ON/OFF

AUX 1

HDMI 7 5V/1A

ON/OFF

OPTION

Setup

Items not listed under Introduction > Box Contents are sold separately.

1. Use the included Euroblock connectors to connect the inputs on the rear panel to your

audio sources.

• Each channel input has a ground (G), cold/negative (–), and hot/positive (+) connector.

2. Use the included Euroblock connectors to connect the outputs on the rear panel to your

loudspeakers.

• Each channel output has a switch for 70V and 100V.

3. Use the included power cable to connect the power inlet to a power outlet.

4. Power on all of your audio sources (Blu-ray

players, stereos, microphones, amplifiers,

etc.).

5. Press the power switch to power on DN-470A.

6. Adjust the level knobs for each channel input as necessary.

Example

Blu-ray Player

Loudspeakers

Receiver

Power