User Manual

23
Appendix (English)
Technical Specifications
Low-frequency driver
6.5" woven Kevlar low-frequency driver
Mid-frequency driver
5.25" woven Kevlar mid-frequency driver
Tweeter 1" silk dome tweeter with integrated waveguide
Frequency response 50 Hz - 20 kHz
Crossover frequency
Low-Mid: 400 Hz
Mid-High: 4 kHz
Low-frequency amplifier power 110 W
Mid-frequency amplifier power
30 W
High-frequency amplifier power
20 W
LF cutoff
flat, 80 Hz, 100 Hz
LF boost cut +6 dB at 100 Hz
MF boost cut +6 dB at 1 kHz
HF boost cut +6 dB at 10 kHz
Polarit
y
Positive signal at + input produces outward LF cone displacement
Input impedance
20 KΩ balanced, 10 KΩ unbalanced
Input sensitivity
85 mV pink noise input produces 90 dBA output SPL at 1 meter with
volume control at maximum
Power 160 W
Protection
Output current limiting; over-temperature; transient on/off protection
to prevent loudspeaker "pops"; subsonic filter; external mains fuse
Cabinet
Metal grille and plastic front baffle with vinyl-laminated high-acoustic-
efficiency MDF
Power Requirements 100-120V, 50/60 Hz; 220-240V, 50/60 Hz
Dimensions
(Width x Height x Depth)
10.6" x 15.4" x 11.2"
268 mm x 391 mm x 285 mm
Weight
23.4 Ibs./unit
10.6 kg/unit
Specifications are subject to change without notice.
Trademarks and Licenses
Denon is a trademark of D&M Holdings Inc., registered in the U.S. and other countries.
All other product or company names are trademarks or registered trademarks of their
respective owners.
California Proposition 65 Warning
WARNING: This product contains chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm. (California law requires this warning to be given to customers in the State
of California.)