Operation Manual
20
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
Setting Defaults
n Firmware Version
Displays the firmware version of the DN-700C.
1
Press ON/STANDBY.
The power of DN-700C is switched ON, and the display screen lights.
2
While DN-700C is stopped, press MENU.
The menu list is displayed.
3
Rotate the jog dial to select “06 Utility”, and press the jog dial.
4
Rotate the jog dial to select “03 Firmware Version”, and press the jog dial.
Displays the firmware version of the DN-700C.
•Press either the
Back or STOP button to return.
n Network Status
Displays network setting information.
1
Press ON/STANDBY.
The power of DN-700C is switched ON, and the display screen lights.
2
While DN-700C is stopped, press MENU.
The menu list is displayed.
3
Rotate the jog dial to select “06 Utility”, and press the jog dial.
4
Rotate the jog dial to select “04 Network Status”, and press the jog dial.
Network setting information (IP address, MAC address, Netmask, Gateway, DNS) is displayed.
•Press either the
Back or STOP button to return.
n Format Media
1
Press ON/STANDBY.
The power of DN-700C is switched ON, and the display screen lights.
2
While DN-700C is stopped, press MENU.
The menu list is displayed.
3
Rotate the jog dial to select “06 Utility”, and press the jog dial.
4
Rotate the jog dial to select “05 Format Media”, and press the jog dial.
A pop up message is displayed.
5
Select “OK” and press the jog dial.
The media is formatted.
•Press either the
Back or STOP button and selected Cancel to return.