Operation Manual

24
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
Playback
ON/STANDBY
2
MEDIA Jog Dial / ENTER
3
CUE
1
Selecting the media to playback
1
Press ON/STANDBY.
The power of DN-700C is switched ON, and the display screen
lights.
2
While DN-700C is stopped, press MEDIA.
The media list is displayed.
Media List
CD
USB(None)
iPod/iPhone
NET
•For details on the media list display contents, see “Displaying the
media list” (vpage23).
3
Rotate the jog dial to select the media that you want
to play back, and press the jog dial.
•To change the playback folder, press the LIST button on the remote
control or select “File List” in the menu (vpage21).
Playback
Rotate the jog dial to select the le that you want to
playback, and press 1.
1 lights and playback starts.
n To stop playback
Press 2.
•Playback stops, 1 goes out and CUE lights.
•The playback position is moved to the playback start position set
for “Finish Mode” in the preset menu, and playback stops.
•The stop position can be changed in the “Finish Mode” settings
as shown below.
When Stop is set : Playback is stopped at the beginning of the
track.
When Next is set : Playback is stopped at the beginning of the
next file.
When Recue is set : Playback is stopped at the point where
playback was previously started.
n To pause playback
Press 3 during playback.
•Playback is paused, and 3 lights.
•Press 1 again to restart playback.
n To return to the playback start position
Press CUE during playback.
•Playback switches to cue standby at the playback start position.
Press CUE
button
Disc position
Cue search operation
During
playback
Press
1 button
Press
3
button
During
playback
Press 1 button