Operation Manual

43
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
Various playback functions with RC-F400S
Hot Start list display
HOT START LIST
EXIT
STORE
NEXT
PAGE
PAGE 1
\ MPGLANG \ abcdefg.MP3
\ MPGLANG \ Honey01.MP3
\ MPGLANG \ abcdefg0.MP3
\ MPGLANG \ abcdefg7.MP3
03
\ MPGLANG \ abcdefg1.MP3 04
\ MPGLANG \ abcdefg3.MP3 06
\ MPGLANG \ abcdefg4.MP3 07
\ MPGLANG \ abcdefg6.MP3
09
\ MPGLANG \ abcdefg5.MP3
10
02
01
08
FILE
LIST
\ MPGLANG \ abcdefg2.MP3 05
q
e
w
r
t
y
u
q
Title display
Displays “HOT START LIST”.
w PAGE display
Displays the page.
e Hot Start list
Displays the set file name.
The ♪ mark is displayed for the file that is being played back.
r EXIT button
Enters the main mode.
t FILE LIST button
Moves to the file list.
y STORE button
When the media is set to USB, the set Hot Start list is saved as
a file.
The PPL file is saved in the root directory.
•A PPL file is the file that saves the content of a Hot Start list.
u NEXT PAGE/PREV PAGE buttons
Display the list in the next/previous page.
Connection
As shown below, connect the RS-232C port on DN-700C to the
RS-232C port on RC-F400S using the straight cable that is supplied
with RC-F400S.
•Once they are connected, turn the power switch on for the
respective devices.
•Configure the following items in the DN-700C “System Setting”.
•Serial bit Rate: 38400
•Serial Protocol: RC
•After connection, fix the cable by turning the cable terminal screws.
Notes on connecting the AC adapter
•Always turn the power switch off before connecting/
disconnecting the AC adapter.
•Do not touch the AC adapter with wet hands.
•When disconnecting the AC adapter, make sure that you hold the
plug. Pulling or bending the cord may damage the cord or cause
electric shock or fire.
DC IN 5V
POWER
RS232C
OFF
ON
RC-F400S
DN-700C
RS-232C Straight cable