Networked CD Player Operating Instructions

24
ENGLISH
3. DEVICE OPERATION
Finish mode setting is “Next”
Set value Processing at the end of track
On (default)
(Reserved a next track): Cue at the playback stating position of index 01 of reserved
track
(Not reserved a next track): Cue at the beginning of index 01 of next track
Off Cue at the beginning of index 01 of next track
Finish mode setting is “Recue”
Set value Processing at the end of track
On (default)
(Reserved a next track): Cue at the beginning of index 01 of reserved track
(Not reserved a next track): Cue at the playback starting position
Off Cue at the playback starting position
Finish mode setting is “Continuous”
Set value Processing at the end of track
On (default)
(Reserved a next track): Start playback at index 01 of reserved track. If the reserved
track is next track of the current track, it will start playback at
index 00.
(Not reserved a next track): Start playback at index 00. If the current track is final track of
the disc, It will stop.
Off Start playback at index 00. If the current track is final track of the disc, It will stop.
12. Fader start mode (Fader Start)
This feature allows you to decide how the DN-C640 behaves when the Fader Start pins are short-circuited
Set value Processing
Play
Unit starts playback when the remote fader pins (9-11) are short circuited and remains
playing when the pins open
Play-Pause (default)
Unit starts playback when the remote fader pins (9-11) are short circuited and pauses
playback when the pins open
13. Index tally (Index Tally)
This feature allows you to select the processing of INDEX tally pin (17) of the parallel control terminal.
Set value Processing
Index2 (default) Output index 2 tally signal to INDEX tally pin (17).
Index3 Output index 3 tally signal to INDEX tally pin (17).
14. Mono mode (Mono)
This feature allows you to force playback of stereo audio into a mono signal sent out both the L and R terminals
Set value Processing
Off (default) Output L and R original signals from the output terminals.
On Output mixed L and R stereo signals from the output terminals.
15. Playlist playback mode (Play List)
This allows you to turn on or off the ability to play a playlist created in the Web Remote (See Page 32)
Set value Processing
Off (default) The playlist is ignored and normal playback is possible
On The unit plays back according to the files designated in the playlist