User Guide
2
2. SERVICE MODE
2.1 Confi rming Microcomputer Firmware Version
[ Using the front panel ]
1. While in stop and shift mode, press the MENU/STORE/
UTILITY button.
2. Turn the jog wheel until “FW version” appear in the
display.
3. Press the jog wheel. The Display switches to the fi rmware
version.
4. Press the STOP/CANCEL button to cancel.
[ Using the remote control unit ]
1. While in stop mode, press the UTILITY button.
2. Press the 3 button or the 4 button until “F/W version”
appear in the display.
3. Press the ENTER button. The Display switches to the
fi rmware version.
4. Press the STOP button to cancel.
2. SERVICE モード
2.1 マイコンファームウェアのバージョン確認
(フロントパネルを使って)
1. STOP モードでかつ、SHIFT モードのときに、
MENU/
STORE/UTILITY
ボタンを押します。
2. FW version がディスプレイに表示されるまでジョグダ
イヤルを回します。
3. ジョグダイヤルを押します。ディスプレイ表示がファーム
ウェアバージョンに切り替わります。
4. 取り消す場合は、
STOP/CANCEL
ボタンを押します。
(リモコンを使って)
1. STOP モードのときに、
UTILITY
ボタンを押します。
2.
v
または
w
ボタンを、FW version がディスプレイに表示
されるまで押します。
3.
ENTER
ボタンを押します。ディスプレイ表示がファーム
ウェアバージョンに切り替わります。
4. 取り消す場合は、
STOP
ボタンを押します。
“F/W Version” menu display
メニュー「F/W Version」の表示
“F/W Version” confi rmation display
「F/W Version」の確認表示