Operation Manual

24
Getting started Connection Troubleshooting Specifications Index
PresetOthers
Playback
Memo function
n Memo Call
This function calls saved memo data.
1
Select the track that is stored with the memo data that you want to call.
•When a track that has memo data stored is selected, the MEMO indicator lights in the display.
2
Press TITLE - MEMO.
“Memo Call?” is shown in the display.
3
Press SEL.
When the playback speed is called from the memo data, the PITCH indicator flashes, and the pitch may
be locked.
This is because the actual playback speed and playback speed selected by the pitch slider differ. In order
to cancel the pitch lock, adjust the pitch slider to the same pitch as the called memo data.
n Memo Clear
This function clears saved memo data.
1
Select the track that is stored with the memo data that you want to clear.
•When a track that has memo data stored is selected, the MEMO indicator lights in the display.
2
Press TITLE - MEMO.
“Memo Call?” is shown in the display.
3
Turn SEL. to select “Memo Clr?”.
4
Press SEL.
“Clear OK” is shown in the display.
5
Press SEL.
The MEMO indicator in the display goes out, and the memo data is cleared.
n Disc tray auto close
Disc tray will automatically close after 30 seconds have elapsed for the disc tray auto close mode.
(Preset item 3)
n End of message
During playback, the Play Position indicators start flashing when the remaining playing time to the end
of the track (set in the preset mode) is reached, indicating that the end of the track is near. (Preset item
6)