DOUBLE CD PLAYER DN-D9000 OPERATING INSTRUCTIONS -TRACK PLAY TRACK RVS OPEN/ CLOSE FLIP A3 A4 CUE 4 HOT START SPLICE DIR SOU RC E CLR RANGE FX A1 A2 A3 B A1 B 4 HOT START TOTAL REMAIN ELAPSED CONT. SINGLE m s ALL OFF B A2 B PITCH/VOL SPLICE DIR SOU RC E DRAG S. BRAKE ECHO DUMP RVS 0% CONT.
CAUTION SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER 3. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
ENGLISH FRONT PANEL DIAGRAM #2 #7 #3 RVS #8 #4 #9 #5 $0 #6 -TRACK HOT START SAMPLER SAMP1 SAMP2 B $1 $2 $4 $3 $5 @3 @4 @1 !3 $6 @9 #0 #1 -TRACK PLAY PARAMETERS EXIT/RELOOP STOP FLIP A3 B PUSH ON/OFF CUE RVS OPEN/ CLOSE A3 A4 CUE A2 A1 A2 4 HOT START B f s TIME MEMO PROGRAM RELAY TOTAL TIME PRESET RANDOM SOU RC E CLR RANGE FX DRAG S. BRAKE ECHO DUMP RVS A1 A2 A3 B A1 B TOTAL REMAIN ELAPSED CONT. m PLATTER MODE ALL OFF A2 m s MEMO PROG 0% CONT.
NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA FRONT PANEL DIAGRAM 482 465 r e t t OPEN/CLOSE e 2 76.2 1 88 r OPEN/CLOSE POWER ON y 7 x 10 hole Loch 7 x 10 Trou 7 x 10 OFF q Orificio de 7 x 10 Opening 7 x 10 w y • Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack. • Vermeiden Sie hohe Temperaturen.
• DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN610003-3. Following the provisions of 73/23/EEC, 89/336/EEC and 93/68/EEC Directive.
ENGLISH – TABLE OF CONTENTS – z x c v b n m Main features .....................................................6 , . Alpha mode (Alpha track monitor)....................13 Connections/Installation .....................................7 ⁄0 ⁄1 A-B trim ............................................................16 ⁄2 ⁄3 ⁄4 ⁄5 ⁄6 Platter effect.....................................................19 ⁄7 Specifications ...................................................25 Part names and functions ....
ENGLISH 2 CONNECTIONS/INSTALLATION 3 PART NAMES AND FUNCTIONS The DN-D9000 is designed to be used horizontal. If main unit is tilted, the DN-D9000 may not function properly or disc may not be loaded or unloaded property. 1. Turn off the POWER switch. 2. Connect the RCA pin cords between the DN-D9000 outputs and inputs of your mixer. Be sure MAIN OUTs are main outputs and MONITOR OUTs are outputs of Alpha-Track sound. 3.
ENGLISH • PRESET: When this button is pushed for more than 1 sec, the PRESET mode starts. (3) RC-D90 Front panel CAUTION: • Note that there are many buttons working two different functions s selected by short time pushing or long pushing (1second or more). The mark indicates short time push function and mark indicates long time push function. !9 !3 OPEN/CLOSE button • Open or close disc holder with these buttons while button illuminations light.
ENGLISH #6 EXIT/RELOOP button • Use this to exit, back again to Seamless Loop playback for A1 and A2 with keeping all loop settings. You can add variety looping with this function. • The LED indicates what’s going on about looping. EXIT/RELOOP LED lit: Seamless Loop on or playing. EXIT/RELOOP LED flashing: Playback after exit loop. • This button also switches repeat play modes on and off in Program, Random mode.
ENGLISH o PROG indicator (5) Display q w e r t y u w A3 B A4 B A1 B A2 B TOTAL REMAIN ELAPSED CONT. SINGLE m s m KEY ADJ. f s MEMO PROG i o t q Track, minute, second and frame displays • These displays indicate current position information. w Loop mode indicators • DN-D9000 has Loop mode indicators consist of four sets of A (A1, A2, A3, A4), B and two arrows. A and B marks indicate A and B points are exist. • Two arrows indicate loop setting mode as follow.
ENGLISH 5 BASIC OPERATION 6 SCRATCH • With Pitch slider you can adjust the playback speed (Pitch). • If you would not change key of sound, use the Key Adjust function. q, e, r -TRACK HOT START SAMPLER RVS SAMP1 SAMP2 B PARAMETERS EXIT/RELOOP STOP FLIP PITCH/KEY A3 CLR A4 CUE FLIP RANGE A1 CLR A2 A1 A2 B KEY ADJ. MEMO PROGRAM RELAY TOTAL TIME PRESET RANDOM B 2 3 4 Turn the @2 Jog Wheel to change Cue point. You can hear the short sound of the current Cue point.
ENGLISH 7 PLAYING THE ALPHA TRACK (Real Time Sampler) Adjust sound level and pitch The Alpha-Track and sampler playback sound level and pitch can be adjustable. • The Alpha-Track function lets you play one more track (the Alpha-Track) while playing the main track. • The Alpha-Track’s pitch and sound level can be adjusted. • You can switch output channel of Alpha-Track sounds from MAIN OUT (default) or MONITOR OUT with the presets.
ENGLISH 8 ALPHA MODE (Alpha-Track Monitor) Pitch after switching This function lets you play the Alpha-Track from MONITOR OUT while playing the main track. Using this function, you can prepare the next song on same CD before the end of your first track. While in Alpha-Mode, Alpha-Track’s output can be monitored through your mixers headphone. Therefore, you can switch between the Alpha-Track and main track at any time, so two tracks on the same disc can be played continuously with no break in the sound.
ENGLISH 9 SEAMLESS LOOP/HOT START/STUTTER AND SPLICE Stutter • A1 and A2 points can be also used for Stutter playback. e r q, w, y RVS -TRACK HOT START SAMPLER SAMP1 SAMP2 B -TRACK PLAY PARAMETERS EXIT/RELOOP STOP FLIP EXIT/ RELOOP B PUSH ON/OFF CUE OPEN/ CLOSE A1 A2 MEMO PROGRAM RELAY TOTAL TIME PRESET RANDOM A3 B A1 B m s Clear the A1/A2 point MEMO PROG 0% TAP PLAY/PAUSE ND CONT.
ENGLISH Splice • Use this function to skip a section between A and B points. The A point is the point from which jumping starts, the B point the point at which jumping ends. • The A1 and A2 Hot Starts and Stutter functions cannot be used if both Splice points are set in the Splice mode. e w, r, t RVS -TRACK HOT START SAMPLER B SAMP1 SAMP2 q -TRACK PLAY PARAMETERS EXIT/RELOOP STOP FLIP A3 CLR A4 B B EXIT/ RELOOP TRACK PUSH ON/OFF CUE RVS OPEN/ CLOSE A2 A1 A2 KEY ADJ.
ENGLISH 10 A/B TRIM A/B Move Select B point (in A-B Trim) • The seamless loop, sampler loop and splice A and B points can be fine-adjusted using Jog Wheel. • There are two ways for doing this. A-B Trim: Trim the points during loop playback as a rehearsal. A/B Move: Move the points using the Manual Search. A/B Move can not be used with Sampler loop. 5 A/B TRIM y Select the A-B Trim mode and B to select the B point, push the B button after selecting the A point. Then push the B button.
ENGLISH 11 A3/A4 FOR SAMPLER, 4 HOT START, ALPHA-TRACK HOT START w, o q, r, !0 The buttons of A3, A4 and corresponding FLIP, B and EXIT/RELOOP are used for Sampler, 4 Hot Start and AlphaTrack Hot Start functions. RVS -TRACK HOT START SAMPLER B SAMP1 SAMP2 y, u e, t -TRACK PLAY PARAMETERS EXIT/RELOOP STOP i, !0 B EXIT/ RELOOP OPEN/ CLOSE FLIP A3 A4 CUE KEY ADJ. TIME MEMO PROGRAM RELAY TOTAL TIME PRESET RANDOM EXIT/ RELOOP DRAG S.
ENGLISH Exit and Reloop EXIT/ RELOOP ★ ★ RVS -TRACK HOT START SAMPLER B SAMP1 SAMP2 ★ -TRACK PLAY PARAMETERS EXIT/RELOOP STOP FLIP Reverse Play CLR A4 EXIT/ RELOOP B TRACK PUSH ON/OFF CUE RVS OPEN/ CLOSE A3 A4 CUE A1 CLR A2 f s TIME MEMO PROGRAM RELAY TOTAL TIME PRESET RANDOM B FLIP LE CT SOU RC E DRAG S. BRAKE ECHO DUMP RVS A1 CLR RANGE FX A2 B A1 A2 A3 B A1 B TOTAL REMAIN ELAPSED CONT. SINGLE m s m PLATTER MODE ALL OFF s KEY ADJ. f MEMO PROG 0% CONT.
ENGLISH 12 PLATTER EFFECT ECHO (TAIL ECHO): Adds a 1/1 echo sound when playback stops. • The times of echoes can be set with the PARAMETERS knob. This function is only available for the main track. ★3 The ECHO is activated when the PLAY/PAUSE button is pushed during playback. w, e RVS -TRACK HOT START SAMPLER SAMP1 SAMP2 B -TRACK PLAY PARAMETERS EXIT/RELOOP STOP FLIP A3 B TRACK PUSH ON/OFF CUE FLIP A3 A4 CUE A1 CLR A2 MEMO PROGRAM TOTAL TIME PRESET RANDOM DRAG S.
ENGLISH 13 EFFECTOR (FX) CLR A4 B EXIT/ RELOOP PARAMETERS A2 B EXIT/ RELOOP TRACK RVS OPEN/ CLOSE FLIP A3 A4 CUE CLR A1 A1 A2 PRESET RANDOM DRAG S. BRAKE ECHO DUMP RVS A1 A2 A3 B A1 B 4 HOT START TOTAL REMAIN ELAPSED CONT. SINGLE m s PLATTER MODE ALL OFF A/B TRIM PITCH/VOL SPLICE m KEY ADJ. f s MEMO PROG A4 B A2 B Effectors DRAG S. BRAKE ECHO DUMP RVS DELAY (DEL): • The DELAY time can be selected by turning the PARAMETERS knob.
ENGLISH 14 MEMO (Custom Setting Memory) • When the playing pitch is loaded from the Memo with PITCH LED flashes, playing Pitch is locked until Pitch Slider comes same Pitch. While playing Pitch is locked, PITCH LED keeps flashing. CD setting information can be stored in the non-volatile memory. The stored information can be called out of the memory later, making it easy to prepare for your mixing. Memo Call in Alpha-Mode • In the Alpha-Mode, Memo call function can be used when main track is not Cue.
ENGLISH GND (Sleeve) • Using the cross cable, connect the X-EFFECT terminals between two DN-D9000 units or between one DN-2600F and one DN-D9000 unit. • If a DN-2600F is the master unit, take the procedures below in the Preset mode of the DN-2600F beforehand. (For details, refer to the DN-2600F’s operating instructions.) ✽ Set the “Copy Master” for the Preset item (14). Then, step to the q below on the slave unit of DN-D9000.
ENGLISH 16 PROGRAM/RANDOM/RELAY PLAY/POWER ON PLAY w, r, t, y ★3 RVS -TRACK HOT START SAMPLER SAMP1 SAMP2 B A3 PARAMETERS A4 EXIT/ RELOOP B TRACK PUSH ON/OFF CUE OPEN/ CLOSE FLIP A3 CLR A2 4 HOT START SPLICE SCRATCH B KEY ADJ. TIME MEMO PROGRAM RELAY TOTAL TIME PRESET RANDOM FLIP DRAG S. BRAKE ECHO DUMP RVS A1 CLR EXIT/ RELOOP B PLATTER MODE ALL OFF A2 ★3 You can use program repeat play function with push EXIT/RELOOP button.
ENGLISH w, y RVS -TRACK HOT START SAMPLER SAMP1 SAMP2 B -TRACK PLAY PARAMETERS EXIT/RELOOP STOP -TRACK PLAY A3 CLR A4 B EXIT/ RELOOP CUE OPEN/ CLOSE FLIP A3 A4 CUE A1 A2 TOTAL TIME PRESET PROGRAM RANDOM PLATTER MODE ALL OFF A2 A1 A2 A3 B 4 HOT START A1 B TOTAL REMAIN ELAPSED CONT. SINGLE m s m s KEY ADJ. f MEMO PROG A4 B PITCH/V EXIT/ RELOOP B 4 HOT START A3 B A1 B A2 B m CONT./SINGLE RELAY TIME TOTAL TIME MEMO PRESET PROGRAM RANDOM KEY ADJ.
ENGLISH 17 SPECIFICATIONS GENERAL Type: Disc type: Dimensions: Installation: Mass: Power supply: Power consumption: Environmental conditions: AUDIO SECTION Main out, Monitor out Quantization: Sampling frequency: Oversampling rate: Total harmonic distortion: Signal to noise ratio: Channel separation: Frequency response: Analog output Main output level: Monitor output level: Load impedance: Digital output Signal format: Output level: Twin mechanism compact disc player with wired remote control Standard
16-11, YUSHIMA 3-CHOME, BUNKYOU-KU, TOKYO 113-0034, JAPAN Telephone: (03) 3837-5321 Printed in Japan 511 3876 003