Digital Media Turntable DN-S3700 Owner’s Manual
n SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS U.S.A., Canada models CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1.
n NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA ANGÅENDE ANVÄNDNINGEN CAUTION: • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. • No naked flame sources, such as lighted candles, should be placed on the unit. • Observe and follow local regulations regarding battery disposal.
CAUTION: To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. VORSICHT: Um dieses Gerät vollständig von der Stromversorgung abzutrennen, ziehen Sie bitte den Stecker aus der Wandsteckdose. Der Netzstecker wird verwendet, um die Stromversorgung zum Gerät völlig zu unterbrechen; er muss für den Benutzer gut und einfach zu erreichen sein.
CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. 2. Do not open the rear cover In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON DEALER. 3.
Getting Started Contents Connections Playback Basic Operations Memo Function Getting Started Accessories ·····················································································1 Main Features ·················································································2 Installing the Platter, the Vinyl Disc and the Slip Mat ················3 (1) Installing the Platter, the Vinyl Disc and the Slip Mat ················3 (2) Installation ···················································
5. Vibrant Tube Display w/ 3-line Character Text Support & Waveform Display Support Another unique quality of the DN-S3700 is its informative & animated tube display. The display offers three lines of character information to quickly navigate through your CD TEXT tracks and USB files. A visual 100-position Marker Point indicator follows your hand movements at lighting speeds without drift.
Getting Started Installing the Platter, the Vinyl Disc and the Slip Mat (1) Installing the Platter, the Vinyl Disc and the Slip Mat Connections 1. Install the Platter on the taper boss of the motor. 2. Install the Slip Mat on the Platter. Fig.1 Screw (2) Installation 3. Insert D hole of the Vinyl Disc on the D shaft of the Motor. 4. Fix the adapter with 2 screws (qhead). Please set up DN-S3700 horizontally. NOTE Playback Basic Operations Memo Function Vinyl Disc • Use the proper size screwdriver.
• This button will start or pause playback. • Push once to start playback, once again to pause playback, and once more to resume playback. Top Panel w CUE button Q6 Q7 Q8 Q9 W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 Q4 One of three filters (LOW PASS, MID PASS and HIGH PASS) can be selected. E0 t FLANGER button E1 y ECHO/LOOP button y t The depth and delay time can be selected. The ECHO and LOOP functions can be selected. The feedback level and delay time can be selected.
Getting Started Q4 CLR1, CLR2, CLR3 buttons These clear the hot start points or the auto loop playback start points. Q5 EXIT button When the EXIT button is pressed during auto Connections loop playback, auto looping is canceled and normal playback resumes. Q6 Vibrant Tube Display The display provides various information relating to playback, title, position, time and others. Playback Basic Operations Memo Function Q7 MIDI button This sets the MIDI mode and starts the USB MIDI control mode.
Getting Started Front Panel Rear Panel Connections q Disc loading slot Insert CDs here. Insert the CD slowly, then release it. qw e rt y u q Fader start terminal • Connect this terminal to a compatible mixer. The various fader commands (play, pause, cue, etc.) are received from the mixer. • Use a 3.5 mm stereo mini cord for connection. • This is unbalanced RCA output terminals. • Audio signals outputs. • Digital data is available from these terminals. • Use 75 Ω/ohms pin cord for connection.
Getting Started r File data indicators Display This indicates the file’s format. t D-LINK connection confirmation indicator Q9 Q8 Q7 Q6 Q5 Q4 Q3 Q2 This lights when D-LINK connection has been confirmed. Connections y Keyboard connection indicator Deck for which keyboard is effective will be displayed. u KEY ADJ. indicator Playback Basic Operations Memo Function KEY ADJ. indicator appears in display when the Key Adjust mode is ON.
Getting Started Connections Connections Connections RJ45 cross cable (We recommend using an RJ45 cross cable no longer than 3 meters.) 3.5 mm stereo mini cord 3.5 mm stereo mini cord RCA Cord RCA Cord USB A terminal Playback Basic Operations Memo Function 1. Turn off the POWER switch. 2. Connect the RCA pin cords to the inputs on your mixer. 3. If the mixer has a fader output terminal, connect the mixer and the DN-S3700’s fader input terminal with a 3.5 mm stereo mini cord.
Getting Started 2. USB mass storage device About Connected Devices 1. PS/2Keyboard Connections q Qwerty, Qwertz, Azerty type keyboard layouts are supported. w The DN-S3700 can be operated from the keyboard. For the usable keys and their functions, refer to the table below.
n Loading the disc • When the CD-ROM is inserted into the disc loading slot, folder and MP3 file name in root of CD-ROM are displayed. n Selecting the MP3 file n Loading the disc • When the CD is inserted into the disc loading slot, the standby mode is set at the first track on the CD. The CUE button lights when the standby mode is set. • The Auto Cue function sets the standby mode to the position at which the sound starts. The setting can be changed at “PRESET” – “(2) Auto Cue” (vpage 27).
Getting Started File Playback mode Playlist Playback mode Top menu Top menu File Play Connections Pressed and hold Playlist Play Pressed and hold Playlist Name Playback Basic Operations Memo Function Category TOP 40 or Favorites 1 Step Search 2 Step Search Utility Specifications
Searching Procedure Search modes w 2Step Search 1st Search mode 2nd Search mode Search mode Album Artist Title Album Artist PARAMETERS At the top menu of the file playback mode, turn the knob or Vinyl disc and select “Search mode”.
Getting Started Playlist Play Mode This mode is for searching for and selecting playlists on a USB memory device and playing the MP3/WAV files registered on that list. Connections b Use the included “DENON DJ Music Manager” to create playlists. Playlist searching Playback Basic Operations Memo Function The following describes the procedure for searching from the top menu in the playlist play mode. To top menu When in the file playback mode: Press the PLAYLIST button while in the pause or standby mode.
n OTHER mode The cue point is set or changed in the following cases: • When playback is paused and CUE button is pressed • When a new file is selected • When the cue point is set in the manual search mode At the screen for selecting the name (artist, album, Basic Operations A list of only the names including the selected character string is displayed. Operations b For instructions on “About Character Input” (v page 23). knob or the Vinyl disc to select the name from the list.
Getting Started Changing the playing speed (pitch) Changing the playing speed (pitch) temporarily The playing speed (pitch) can be adjusted using the pitch slider. The key adjust function makes it possible to keep the key constant, regardless of the playing speed (pitch). The pitch bend function can be used to change the playing speed temporarily. The DN-S3700 includes two pitch bend functions using the PITCH BEND buttons and the Vinyl disc.
This function allows you to select the next track during playback, without interrupting the currently playing track. The cross fader can be used for a smooth transition to the next track. Turning the next track mode on. e During playback, press the NEXT TRACK button. b When the NEXT TRACK button is pressed again while the next track mode is on, the next track mode is turned off. b Only files from the same source can be selected in the next track mode.
Getting Started Seamless Loop/Hot Start/Stutter Connections Playback Basic Operations Memo Function Q3,Q6 i,o, Q4,Q5 u Q0 Q1 Q2 Exiting a loop/Returning to a loop. Seamless Loop Playback/Hot Start Playback/Stutter Playback q,w,y,Q8 e r Q7 t,y Setting the A point. q Press the A button. The A point is set at the point at which the button is pressed. b The A button can be used independently for different hot start settings.
Clearing auto loop points This function automatically sets loops in perfect beats. Up to three auto loop points or hot start points can be stored at buttons 1, 2, and 3. Q3 Press one of buttons CLR1, CLR2 or CLR3. The auto loop point for the corresponding number is cleared. Setting for the AUTO LOOP Hot start playback Storing auto loop points i Press one of buttons 1, 2 and 3 when the button is lit a dark red. The auto loop point is stored and the button is lit a bright red.
Getting Started Connections Playback Basic Operations Memo Function r,y, Q0,Q4 q,w,e t,i o,Q2 Q3,Q4,Q6 Auto BPM Counter Effector The BPM for the currently playing track or the track at which the cue standby mode is set is measured automatically and displayed. One of the three types can be selected. • When the auto BPM counter is off, press the TAP button for over 1 second to turn the auto BPM counter on. • When the auto BPM counter is off, it turns on when the track changes.
o Press the FLANGER button. The FLANGER button and PARAMETERS button flash while the parameters are being set. b The FLANGER Depth can be set with the EFFECTS knob, while the FLANGER Delay Time can be set with the PARAMETERS knob. Turning the flanger off. Filter Parameter Setting Q3 Press the FILTER button. When the FILTER button is pressed, the FILTER button lights and the parameters setting screen is displayed.
Getting Started Reverse Play q During playback, press the REVERSE button. The reverse function turns on and reverse play starts. Connections n Reverse effect During playback, press the REVERSE button. Playback Basic Operations Memo Function b The mode switches between reverse playback and normal playback each time the REVERSE button is pressed. b Dump playback turns off if the hot start or stutter play operation is performed.
Memo Information DN-S3700 S S A1/A point S S B1/B point S S A2 point S A B2 point S A HOT START point1 A S HOT START point2 A S HOT START point3 A S BPM data (CUE) S S BPM data (A1/A point) S S BPM data (A2 point) S A Playing PITCH S S PITCH on/off S S Key Adjust on/off S S Playback Basic Operations Memo Function DN-HD2500 / DN-HS5500 / DN-S1200 CUE point Connections S : Enable A : Disable Memo Mode Select q Push the MEMO button during Cue mode to enter MEMO m
Getting Started Connections (2) MEMO CALL [Memo Call] • When a file for which a memo has been stored is called out, the “MEMO” indicator flashes for about 5 seconds or less. • To call out the Memo data, select the file that you made a “MEMO”. Then the “MEMO” indicator lights up. • Push the MEMO button to enable Memo call function. • When the PARAMETERS button is pushed in the Memo call mode, all the data stored in the memory is loaded. DN-S3700 goes to standby mode at the called Cue point.
Preset Data: Saves the presetting along with data on a device and reads out the presetting. Selects the Power On Play playlist. Memo Data: This function allows you to store CD memo data onto and import the data from a device. It can also be used to delete the internal CD memo data. Memo Data: This utility can be used to format the external USB memory device connected to the DN-S3700. It can also be used to restore the presetting and memo data to the factory defaults.
Getting Started Preset Data Preset Export Use this procedure to save the presetting along with the data on a device and to read out the presetting. PARAMETERS At the top menu in the Preset Data, turn the Connections Preset Data mode PARAMETERS knob select “Export”. Playback Basic Operations Memo Function When there is no preset data on the external USB memory device: The export operation is performed. When there is preset data on the external USB memory device: Step .
At the top menu in the Memo, turn the PARAMETERS knob select “MEMO Export”. At the top menu in the Initialization, turn the knob and select “S3700 Init.”. b The unit is set to the factory default mode. Initialize Mode PARAMETERS At the top menu in the Utility mode, turn the knob and select “Initialize”. Select the setting item. When “OK” is selected: The export operation is performed. The progress bar is displayed so you can check the progress.
Getting Started Preset Items and Data that can be Preset The “*” mark next to the data indicates the default value. Preset Mode Connections When both Decks are in the standby or pause mode, Playback Basic Operations Memo Function press and hold in the MEMO/-PRESET button for at least 1 second to enter the preset mode. Use the PARAMETERS button to select the preset item. (1) Cue Mode:DENON* / OTHER DENON*: When the playback is started durnig the Play Pause mode, the Cue point is set.
display. 2) Push the PARAMETERS button again. “Preset Initial!” is displayed on the character display while data clearing. 3) Once clearing is completed, “Complete!” is displayed. Compatible Files The files that can be played using an external USB memory device are as shown below. NOTE MP3/WAV FORMAT of USB Device files Audio Layer-3 40-320kbps f/s 44.1kHz, ,STEREO ID-3 Tag V1.0, V1.1, V2.2, V2.3, V2.4 (ASCII + ISO8859-1 (West European)) Encoding PCM WAV Format Metadata Tag C.B.R, V.B.R. 16 bit f/s 44.
Getting Started n FUNCTIONS Instant start: Variable pitch: Specifications Connections n GENERAL Type: Media type: Playback Basic Operations Memo Function Dimensions: Weight: Power supply: Power consumption: Environmental conditions Operational temperature: Operational humidity: Storage temperature: n AUDIO SECTION Utility Specifications Quantization: Sampling frequency: Total harmonic distortion: Signal to noise ratio: Channel separation: Frequency response: • Analog output Output level: • Digital
PROFESSIONAL BUSINESS COMPANY TOKYO, JAPAN http://www.dm-pro.jp Professional Business Company, D&M Holdings Inc.
