ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA IMPORTANT SAFETY INSTRUCTIONS n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANCAIS DEUTSCH ENGLISH n NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA ANGÅENDE ANVÄNDNINGEN CAUTION: • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. • No naked flame sources, such as lighted candles, should be placed on the unit.
ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA FCC INFORMATION (For US customers) 1. PRODUCT This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. 2.
ENGLISH Contents Accessories Specifications Specifications·················································································· 7 Disconnect the power. Remove knobs from the Top Panel. Remove the 6 screws attaching the Top Panel. Remove the 2 screws attaching the Switch unit. Rotate the Switch unit to the desired location. Reinstall the 2 screws holding the Switch unit. Reinstall the Top Panel and reattach knobs.
ENGLISH Getting Started e MIC LEVEL control Part Names and Functions Adjust the level of Mic signal. r Source EQ controls For buttons not explained here, see the page indicated in parentheses ( ). Top Panel Connections r ty u u y t r Playback e i Specifications o w Q0 q Q6 Q1 Q2 Q3 Q3 Contour the frequency response of the selected inputs. HI and MID: • Adjusts the high-tone and mid-tone sound –40 dB to +10 dB. LOW: • Adjusts the high-tone and mid-tone sound –40 dB to +6 dB.
ENGLISH Front panel Q9 Q8 Q7 Getting Started Rear Panel Connections Playback W5 W4 W3 W2 W1 W4 W3 W2 W1 Q7 Power operation switch (POWER) Selects power “ON” or “OFF”. NOTE: Whenever the power switch is in the OFF state, the AC adaptor is still connected on AC line voltage. Please be sure to unplug the cord when you don’t use for along time. Q8 Balanced MASTER OUT jacks (BAL.) • These 1/4” TRS jacks provide a balanced line level output.
ENGLISH Playback Specifications NOTE Always switch on your audio input sources such as CD players first, then your mixer, and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers, then your mixer, and then input units. Turntable 2 Turntable 1 Balanced microphone Select the cables according to the equipment being connected. Audio cables For RCA PINJACK 1/4” TRS jack Unbalanced L L R R 3.
ENGLISH Getting Started Playback Connections Fader Start Playback If the separately sold DN-S3500, DN-S1200 and etc. players are connected to FADER PGM1 or PGM2, they can started using the Channel fader or Crossfader, as long as the 3.5 mm stereo mini cords have been connected. Specifications -*/& 065 L R L '"%&3 R L -*/& '"%&3 1(. CD player (DN-S1200) '"%&3 '"%&3 1(. L R -*/& -*/& 065 '"%&3 1(. '"%&3 1(. %/ 9 R '"%&3 CD player (DN-S1200) '"%&3 1.DN-X120_ENG.
ENGLISH Getting Started Channel Fader Start Crossfader Start CH 1/2 FADER START 1 Channel Fader 2 3 4 Channel Fader Turn on the Connections Move the the way to the bottom. . of CH-1 or CH-2 control all 1 2 Set the standby mode on CD player. Playback Specifications When you want to start the player, move up the and the CD player will begin playing. Channel Fader Channel Fader Crossfader 3 4 5 Turn on the CROSS FADER START A, B.
ENGLISH Getting Started Specifications Connections 2 Stereo Unbalanced RCA jacks 50 kΩ/kohms –50 dBV (3 mV) 2 Stereo Unbalanced RCA jacks 20 kΩ/kohms –14 dBV (200 mV) 3 Bands HI: –30 dB to +10 dB (at 16 kHz), –38 dB to +10 dB (at 20 kHz) MID: –38 dB to +10 dB (at 1 kHz) LOW: –38 dB to +6 dB (at 60 Hz) 1 Mono Active Balanced 1/4” TRS jack 2 kΩ/kohms –54 dBV (2 mV) 20 Hz to 20 kHz (±3 dB) 66 dB 2 Bands HI: –12 to +12 dB (at 10 kHz) LOW: –12 to +12 dB (at 100 Hz) Active Balanced 1/4” TRS jack AC 120 V ± 10
1.DN-X120_ENG.
PROFESSIONAL BUSINESS COMPANY TOKYO, JAPAN http://www.dm-pro.jp &0 : A$CEM KPFF Professional Business Company, D&M Holdings Inc.