DJ MIXER DN-X800 OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D’EMPLOI INSTRUCCIONES DE OPERACION MIC 1 2 3 PH1/LN1 PH2/LN3 PH3/LN5 4 GEBRUIKSAANWIJZING BRUKSANVISNING - 20 L CUE LINE7 R PGM - 20 0 10 MAIN MIC ON/OFF MIN MAX GAIN DIGITAL1 MIN LINE2 MAX GAIN DIGITAL2 LINE4 MIN MAX GAIN DIGITAL3 MIN LINE6 MAX GAIN DIGITAL4 LINE8 15 10 7 5 15 10 7 5 3 1 0 1 3 1 0 1 3 5 8 + 3 5 8 + PWR ZONE MASTER SUB WOOFER MIC POST CH FADER START -26dB +10dB
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PESONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH DEUTSCH FRANÇAIS ESPAÑOL NEDERLANDS SVENSKA NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA FRONT PANEL DIAGRAM / VORDERES BEDIENFELD-SCHEMA / SCHEMA DU PANNEAU AVANT / DIAGRAMA DEL PANEL FRONTAL / OVERZICHT VAN VOORPANEEL / FRONTPANELEN 482 465 7 1 2 3 11 4 10 8 8 9 MIC 7 9 11 7 11 10 10 8 8 9 1 2 3 PH1/LN1 PH2/LN3 PH3/LN5 9 7 14 11 10 13 4 - 20 L CUE LINE7 R PGM - 20 0 ON
ENGLISH – TABLE OF CONTENTS – z x c v Main features ..................................................................4 Installation .......................................................................4 Part names and functions ...........................................4, 5 Connections.....................................................................6 b n m , 3 PART NAMES AND FUNCTIONS Fader start .......................................................................7 X-effect .................
ENGLISH @0 RESET switch #0 • Returns to initial settings when this switch is pressed. @1 • The Fader Start is executed by connecting the Expansion Jack of the RC of the DN-2100F and the DN-2600F, the item that is executed by Crossfader and Ch. fader are selected by the button in each Ch.. It is not possible to use when the RC is not connected. SAMP. buttons This function will start the Sampler of the DN-2600F by using Crossfader and Ch. fader are turned on/off.
ENGLISH NOTE: Always switch on your audio input sources such as CD players first, then your mixer, and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers, then your mixer, and then input units. 4 CONNECTIONS 4. Connect all stereo input sources. Then connect any effects into the stereo Effect, if used. Connect your Microphone(s) and monitor headphones. Make sure all faders are at “zero” and the unit is off. Take care to connect only one cable at a time.
ENGLISH 5 FADER START Channel Fader Start If the separately sold DN-1800F, DN-2100F and DN-2600F players are connected to CH-3 or CH-4, they can be started using the source input fader (Ch. fader) or Crossfader, as long as the 3.5 mm stereo mini cords have been connected. Crossfader Start Turn on the Ch. fader start switch. CH FADER START 1 ON CH3 Fader jack CH4 Fader jack Move the source input fader (Ch. fader) of CH-3 or Ch-4 control all the way to the bottom.
ENGLISH The indicator of H/S 1, 2 and SAMP. change automatically if Assign switches are changed to CH-1 or CH-2. 6 X-EFFECT If the separately sold DN-2100F and DN-2600F players are connected below, they can be started using the source input fader (Ch. fader) or Crossfader. The below function can be started using the source input fader (Ch. fader) or Crossfader by setting it with CD PLAYER. CROSS FADER START A 1 CH2 Input jack H/S BRAKE Lit X 2 3 OFF CH1 Input jack SAMP.
14-14, AKASAKA 4-CHOME, MINATOKU, TOKYO 107-8011, JAPAN Telephone: (03) 3584-8111 Printed in Japan 511 3769 000