Owner`s manual

25
Getting started Connections
Basic operations Advanced OperationsAdvanced operations TroubleshootingExplanation termsInformation Specifications Index
ENGliSh
n Participating in the party mode as an attendee
•When the organizer starts the party mode, up to four attendees
are selected automatically. No operation is required.
•When a device becomes an attendee, “Party Mode Attendee”
appears on the display. The input source automatically switches
to “Music Server” and the same network audio as on the
organizer is played.
•If there are fewer than four attendees, a device can join the
party mode after it has started. To participate in the party mode,
perform the operation described below.
1
Press [PARTY MODE].
“Party Mode” menu appears.
2
Use ui to select “Start Party”, then press [ENTER],
<1/3 ENTER > or p.
•“No Network Connection” is displayed when you are not
connected to a network.
Selecting tracks from attendees
When the party mode starts, “Party Mode Attendee” appears on the
attendee’s display, after which the organizer’s playback information
appears.
1/3
I Gotta Feeling
0:21100%
Top 40
AP
Party Mode Display Attendee Display
1
Press o to display the organizer’s input source.
1/3
Internet Radio
Music Server
---------------------------------
2
Press ui to select the input source, then press
[ENTER], <1/3 ENTER> or p.
3
Press ui to select the item you want to play, then
press [ENTER], <1/3 ENTER> or p.
Setting the network [Network]
Canceling the party mode
1
Press [PARTY MODE].
“Party Mode” menu appears.
2
Use ui to select “Stop Party”, then press [ENTER],
<1/3 ENTER > or p.
“Exit Party Mode?” is displayed.
3
Use ui to select “Yes”, then press [ENTER],
<1/3 ENTER > or p.
In this case, the other devices remain in the party mode.
•“Last.fm”, “Napster” and “USB” are not available in the Party
Mode.
•There can only be one organizer in the network. To form a new party
mode, first cancel the current party mode.
Other network settings
n Network Standby
Set the network function On/Off during standby.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Network” – “Other Network” –
“Network Standby”, then press [ENTER],
<1/3 ENTER> or p.
“Network Standby” menu appears.
3
Use ui to “Network On”, then press [ENTER],
<1/3 ENTER > or p.
Network On
Network is on during standby. Main unit operable with
a network compatible controller. Shortens the time
before the network connection is completed.
•When “Network Standby” is set to “Network On”,
the power display lights orange.
•More power is consumed when in standby (Power
consumption: 7.5 W).
Network Off
Suspend network function during standby. It will take
slightly longer till the network connection is completed.
•The minimum amount of power is consumed when
in standby (Power consumption: 0.2 W).
•This is the default setting.
4
Press [MENU].
The display returns to normal.
1.DNP720AEE2_ENG_Final_0727.indd 25 2011/07/30 8:39:18