Owner`s manual

34
Other functions
Auto power on function
When you press INTERNET RADIO,
MUSIC SERVER, ONLINE MUSIC,
iPod/USB, 1/3 or FAVORITE CALL,
the corresponding device is turned
on and the source automatically
switches.
•When you press 1/3, the previously
selected source is played back.
Using the cursor buttons
1
Display the screen for inputting
characters.
2
Use o p to set the cursor to the
character you want to change.
3
Use ui to change the character.
•The types of characters that can be input are as shown below.
GLower case charactersH
abcdefghijklmnopqrstuvwxyz
GUpper case charactersH
ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! “ # $ % & ‘ ( ) z + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜
GNumbersH
0123456789 (Space)
•The input character type can be switched by pressing
+10 while the
display name is being changed.
•Press CLEAR to delete the character.
•Press 9 to insert a space.
4
Repeat steps 2 and 3 to change the name then press
ENTER to register it.
Last function memory
This stores the settings as they were immediately before going into
the standby mode.
When the power is turned back on, the settings are restored to as
they were immediately before going into the standby mode.
Resetting the microprocessor
Perform this procedure if the display is abnormal or if operations
cannot be performed.
When the microprocessor is reset, all the settings are reset to their
default values.
SOURCE
1/3
ENTER
1
Pull the power cord out of the power outlet.
2
Plug the power cord into a power outlet while
pressing SOURCE and 1/3 ENTER simultaneously.
3
When the power indicator lights green, release the
buttons.
“Initialized” appears in the display.
If “Initialized” does not display in step 3, start over from step 1.
Preparations
Operations
Informations
Operations