For U.S.A., Canada & Europe model Hi-Fi Full Automatic Turntable system MODEL DP-29F FULL AUTOMATIC TURNTABLE SYSTEM (with MM Cartridge) SPEED 30 SIZE 45 33 17 SAFETY PRECAUTIONS The following check should be performed for the continued protection of the customer and service technician. LEAKAGE CURRENT CHECK Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis resistance check. If the leakage current exceeds 0.
ASSEMBLY 1. Remove the main unit with the packing from the box and take off the packing. 2. Set the 45-rpm adaptor on the main unit as shown in the diagram. 3. Insert the turntable onto the center spindle. 4. Set the belt on the driving pulley. (The belt is wound on the turntable.) 5. Set the turntable sheet on the turntable. 6. Remove the tie securing the tonearm. Turntable sheet Turntable Equalizer Amplifier switch 45-rpm adaptor NOTE: The turntable will not function if this tie is not removed. 7. 8. 9.
PART NAMES AND FUNCTIONS 1 2 14 13 3 4 12 11 10 9 1 Dust cover 2 45 rpm adaptor and holder 3 Dust cover hinge 4 Equalizer amplifier switch 5 Finger lever 6 Size Select Lever Set according to the size of the record. 7 STOP Button Press to stop playback. 8 START Button Press to start playback. 9 Cartridge 8 7 6 5 10 Tone arm rest Holds the tone arm. 11 Platter 12 Spindle 13 Rubber mat Place on the turntable. 14 SPEED Select Button Set according to the record speed.
CARTRIDGE REPLACEMENT (The cartridge forms a single body with the head shell. Use the following procedure to replace it.) 1. Remove the screw on the bottom of the head shell sa shown in the diagram. Screw (philips) small Screwdriver (philips) small Desk, table, etc 2. Rotate the entire head shell gently in both directions. The neck of the head shell is attached to the pipe arm. Turn it gently until the shell comes loose. 3. Carefully remove the head shell. (Be careful not to break the lead wire.) 4.
METHOD OF ADJUSTMENT 1. Relationship between belt and pulley. Lead in • Count increases when turned clockwise • Count decreases when turned counterclockwise Lead out • Count increases when turned clockwise • Count decreases when turned counterclockwise Check that the belt is not touching the collars (A) of the motor pulley. If it is, remove the turntable and reattach the belt at the center of the turntable skirt. Motor pulley Belt Should not touch here (A) This diagram shows the bottom panel. Foot 2.
NOTE FOR PARTS LIST l Part indicated with the mark " " are not always in stock and possibly to take a long period of time for supplying, or in some case supplying of part may be refused. l When ordering of part, clearly indicate "1" and "I" (i) to avoid mis-supplying. l Ordering part without stating its part number can not be supplied. l Part indicated with the mark "H" is not illustrated in the exploded view. l Not including Carbon Film ±5%, 1/4W Type in the P.W.Board parts list.
PARTS LIST OF EXPLODED Ref. No.. ! ! ! ! Part No. Part Name Remarks Q'ty 1 941 0001 001 45 r.p.m.
Ref. No.. Part No.
PARTS LIST OF P.W.B. UNIT I.C. P.W.B. ASS'Y Ref. No. Part No. 40 941 0004 202 I.C. P.W.B. ASS'Y 1 SW101 941 0014 001 Slide Sw(SBB-22-14) 1 - Part Name Remarks Q'ty Elec. Capacitor(4.7uF/50V,M,Bulk 5*11) 1 IC(UPC1228HA,8pin) 1 IC101 958 0049 702 C108,208 - Ceramic Capacitor(1000pF/50V K Y5P Taping) 2 C102,107 - Elec. Capacitor(4.7uF/50V,M,Taping 5*11) 2 C202,207 - Elec. Capacitor(4.7uF/50V,M,Taping 5*11) 2 C104,204 - Elec.
WARNING: Parts marked with this symbol have critical characteristics. Use ONLY replacement parts recommended by the manufacturer. The symbols above indicate the following destinations. E3 : U.S.A.
PACKING & ACCESSORIES 201 202 208 209 205 206 207 203 PARTS LIST OF PACKING & ACCESSORIES (not included EXPLODED VIEW) Ref. No. Part No. Part Name Remarks Q'ty 201 941 0008 606 Slipmat Packing Ass'y 202 941 0011 114 Envelope sub Ass'y for E3 1 202 941 0011 127 Envelope sub Ass'y for E2 1 511 3872 007 Inst. Manual for E3 1 511 3872 007 Inst. Manual for E2 1 511 3865 001 Inst.
SCHEMATIC DIAGRAM I.C. P.W.B. ASS'Y BRN YEL YEL BRN RECTIFYER P.W.B. ASS'Y AC 120V 60Hz (U.S.A.
