FULLY AUTOMATIC TURNTABLE SYSTEM DP-29F OPERATING INSTRUCTIONS MODE D’EMPLOI INSTRUCCIONES DE OPERACION SPEED SPEED 30 30 SIZE SIZE 45 45 17 17 33 33 FOR ENGLISH READERS PAGE POUR LES LECTEURS FRANCAIS PARA LECTORES DE ESPAÑOL PAGE PAGINA 05 ~ PAGE 11 ~ PAGE 17 ~ PAGINA 10 16 22 1
IMPORTANT SAFETY INSTRUCTIONS n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ESPAÑOL FRANCAIS ENGLISH n NOTES ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO WARNINGS AVERTISSEMENTS ADVERTENCIAS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust. • Unplug the power cord when not using the unit for long periods of time. • Do not obstruct the ventilation holes.
DP-29F_E2E3_安全規格ページ.
ENGLISH Thank you very much for purchasing the DENON fully automatic turntable system. Please read the operating instructions thoroughly in order to acquaint yourself with the turntable system and achieve maximum satisfaction from it.
ENGLISH 2 BEFORE USING THE TURNTABLE Rubber mat • The drive belt is fitted under the platter. When assembling the player, please handle the drive belt with care. • Remove all packing materials attached to the tone arm, except that on the stylus, and then open the dust cover and assemble. Remove the stylus cover after assembling. 1 Hold the platter by the holes at its outer surface, and then carefully lower the platter so that the center spindle enters the center hole.
ENGLISH 3 CONNECTIONS Before beginning • Turn off components. • Connect the power cord last. • Connect everything securely. Loose connections can lead to distortion. • To prevent damage to cords, connect and disconnect by holding the plug, not the cord. • Make sure that you connect the white PIN-plug to the left (Lwhite) jack and the red PIN-plug to the right (R-red) jack.
ENGLISH 4 CONTROLS q q w e r t y u we r Dust cover Dust cover hinge 45 rpm adaptor and holder Equalizer amplifier switch Finger lever Size select lever STOP button • To stop playback. i START button o !0 Cartridge • To start playback. Tone arm rest • Holds the tone arm. !1 !2 !3 !4 Platter Spindle Rubber mat SPEED button (33 £ / 45 ¢ ) • To select the playback speed. !4 !3 !2 5 !1 !0 o i u y t RECORD PLAYBACK Before beginning • • • • Turn on all the components.
ENGLISH 1 Open the dust cover and place the record you wish to playback on the platter. 2 Set the SPEED button according to the record playback speed. • 33-1/3 rpm record.......................................Set to 33 £ • 45 rpm record.............................................Set to 45 ¢ 3 Set the selector lever according to the record size. 4 Press the START button firmly for at least 1 second. • The platter will start rotating, and playback will start automatically.
ENGLISH 7 TROUBLESHOOTING No power. Platter is not turning. • Power cord is not connected properly. Check the power cord connection. • The drive belt is not fitted to pulley. Check the drive belt. No sound. • The output cords are not connected properly. Connect them securely to your amplifier’s PHONO or AUX jacks. • The input selector on your amplifier is not set to PHONO or AUX. Set to PHONO or AUX. Scratching noise. Stylus jumps. Distorted sound. • Dirty stylus or record.
www.denon.com D&M Holdings Inc.
