DSB-100 Portable Premium Bluetooth Speaker Quick Start Guide DSB-100EM_QSG_141023.
1. Unpacking the speaker Carefully unpack your new Envaya Mini speaker and verify that you have the following items. 2. Charging the speaker q Open the cap on the left side. w Connect the small end of USB cable to the speaker. e Connect the large end of the USB cable to a USB to AC power adapter and a power source or the USB port on your computer. w Green: 70 – 100% Orange: 30 – 69% Red: 1 – 29% q e NOTE NOTE USB to AC power adapter not included.
q Activate the Bluetooth settings on you mobile device. w Select “Envaya Mini” from the list of available Bluetooth devices. In a few seconds you will hear a fast 3 note tone from the speaker indicating that it is connected to your device. The status indicator stops blinking and remains illuminated. 4. Pairing additional Bluetooth Devices q Activate the Bluetooth settings on you mobile device. w Press and hold the 1/3 button for 3 seconds until you hear a 3 tone beep.
5. Using the Speakerphone Answering Calls: Press the 1/3 button on the right side of the speaker. Ending Calls: Press the 1/3 button again. To view the complete user manual, please visit manuals.denon.com/DSB100/ALL/EN/ or scan the QR code below using your smartphone. Microphone 3 DSB-100EM_QSG_141224.
Speaker does not turn on • To turn on the speaker, press and hold the power button for 2 seconds. Cannot pair a Bluetooth device with the speaker • Power On the speaker then press and hold the 1/3 button for 3 seconds until you hear a 3 tone beep. Make sure your mobile device has Bluetooth On and select “Envaya Mini” from the list of Bluetooth devices.
www.denon.com DSB-100EM_QSG_141224.indd 7 D&M Holdings Inc.