Operation Manual

Changing the device name of
Envaya Mini displayed on the
Bluetooth device
1
When the power is on, press and hold the 1/3 button
and volume adjustment (+) button simultaneously for
approximately 4 seconds.
A notification sound is heard and the status indicator blinks 3 times.
2
Press the volume adjustment button.
The device name changes as shown below each time the volume
adjustment button is pressed.
Button The device name of Envaya Mini
Volume adjustment
button (+)
.
Envaya Mini4
Envaya Mini2
Envaya Mini3
Envaya Mini
Volume adjustment
button (-)
.
Envaya Mini2
Envaya Mini4
Envaya Mini3
Envaya Mini
The status indicator blinks as shown below each time the device
name is switched.
The device name of Envaya
Mini
Status Indicator
Envaya Mini Blinks once
Envaya Mini2 Blinks twice
Envaya Mini3 Blinks three times
Envaya Mini4 Blinks four times
z
The notification sound beeps at the same time as the status indicator blinks.
NOTE
0
If you change Envaya Mini’s Bluetooth device name, you must repair and
reconnect all of your Bluetooth devices using the selected name.
0
When the volume adjustment button is not operated for approximately 5
seconds, the selected device name is entered and Envaya Mini restarts.
You cannot change to a different device name other than those listed above.
Contents Preparation Connections Operation Troubleshooting Appendix
27
Index