User manual

3.2 - Conitiuned (SCART).
To be able to switch between the YC and CBVS signals in the Scart
connector, you have to make a small change. The controlling signal
has to be moved to the KeyMaster which is now controlling the
function. It is necessary to do so because the player itself do not
control the signal when playing ex. region 1.
If the player is without a Scart connector the purple wire just has to
be removed.
It is before necessary to disconnect the original signal as shown in
fig. 5.
à Connect the purple wire onto the connector CY142 pin 8.
But it is very imponant that the wire is fitted as shown on the next
page.
Fig. 5