Operating instructions
If the DVD player does not perform properly when operated as instructed
in
this Operating Instruction, check the player, con-
sulting the following checklist.
Problem
Solution
Page
No
power
- Check if the
AC
power cord is properly connected.
-
- Unplug the
AC
power cord once, and wait for 5-10 -
seconds and then plug it
in
again.
No
sound
or
picture
- Check if the TV
is
turned on.
-
-Check
the video connection and HDMI connection.
15,16
-Check
the VIDEO/AUDIO cable connections.
14-16
-Check
if the PROGRESSIVE mode is set correctly.
13,29
Distorted
picture
- Sometimes a small amount of picture distortion may
-
appear. This is not a malfunction.
- Connect the player directly to the
TV.
15,16
Completely
distorted
picture
or
black/white
- Connect the
DVD
player directly to the
TV.
15,16
picture
with
DVD
- Make sure the disc is compatible with the
DVD
player. 6
No
sound
or
distorted
sound
-Adjust
the volume.
-
- Check that the speakers are connected correctly.
14
No
audio
at
digital
output
- Check the digital connections.
14,16
-Check
the audio settings. 30
No
image
from
HDMI
connection
-Check
the HDMI connection. (Check the status of the 16, 17
HOM
I related indications.)
- Check whether the connected monitor equipment or other
16
equipment supports HDCP (This player will not output a
video signal unless the other equipment supports HDCP)
- Connect
the
OVO
player
to
the
display device
using
the
16-17
AudioNideo
cables
(supplied)
and
check
the
setting
of
HOMI.
-Check
whether the output format of this player (HDMI 16
FORMAT) matches the supported input format of other
connected equipment.
Picture
freezes
momentarily
during
playback
-Check
the disc for fingerprints/dust and clean with a soft
34
cloth wiping from center to edge.
-Clean
the disc.
34
Disc
cannot
be
played
- Clean the disc. 34
- Ensure the disc label is facing
up.
17
- Check if the disc is
defective
by
trying another disc.
-
-Cancel
Ratings control or change the control level.
30
-Insert
a correct disc that plays
on
this player.
6
No return to start-up screen when disc is removed - Reset the player
by
turning it off, then on again.
-
The
player
does
not
respond
to
the
remote
- Aim the remote control directly at the sensor
on
the front 12
control
of the player.
- Reduce the distance to the player.
-
- Replace the batteries
in
the remote control.
12
- Re-insert the batteries with their polarities
(+/-
signs) as 12
indicated.
Buttons
do
not
work
or
player
stops
-
To
completely reset the player, unplug the
AC
cord from
-
responding
responding the
AC
outlet for 5-10 seconds.
Player
does
not
respond
to
some
operating
-Operations
may not be permitted by the disc.
6
commands
during
playback
Refer to the instructions of the disc.
DVD
player
cannot
read CDs/DVDs - Use a commercially available CD/DVD cleaner to clean
34
the lens before sending the
DVD
player for repair.
Angle
does
not
switch
-The
angle cannot
be
switched for DVDs which do not 27
contain multiple angles.
In
some cases multiple angles
are only recorded for specific scenes.
Playback does
not
start when the title
is
selected
-Check
the RATINGS setting.
30
The
password
for
rating
level
has
been
-Enter
the default password "4737", then your forgotten
30
forgotten
password will be cleared.
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description
in
these Operating
Instructions for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
-
33-
EN