E8700UD(EN).qx4 06.12.
E8700UD(EN).qx4 06.12.26 18:14 Page 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
E8700UD(EN).qx4 06.12.26 18:14 Page 3 PRECAUTIONS This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: CAUTION: LOCATION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. INSIDE, NEAR THE DECK MECHANISM.
E8700UD(EN).qx4 06.12.26 18:14 Page 4 PRECAUTIONS Dew Warning Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use the DVD Player at least for 2 hours until its inside is dry. Avoid the Hazards of Electrical Shock and Fire • Do not handle the power cord with wet hands. • Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug.
E8700UD(EN).qx4 06.12.26 18:14 Page 5 The serial number of this product may be found on the back of the DVD player. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file. Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No. Model No. Serial No.
E8700UD(EN).qx4 06.12.
E8700UD(EN).qx4 06.12.26 18:14 Page 7 FEATURES ¡Dimmer Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional (525i/480i) television signals. The brightness of the front panel display can be adjusted. ¡Screen Saver The screen saver program starts if there is no activity at the player or its remote for more than 5 minutes. The brightness of the display is darken by 75%.
E8700UD(EN).qx4 06.12.26 18:14 Page 8 FUNCTIONAL OVERVIEW FRONT PANEL 1 12 3 2 11 10 1 2 4 5 DISC 8 38 3 4 9 5 6 7 36 37 REMOTE CONTROL 1 ON POWER MODE OFF OPEN / CLOSE 35 3 A-B REPEAT 13 1 2 3 4 5 6 7 8 9 0 +10 AUDIO DISPLAY 34 REPEAT 14 15 16 17 18 19 RANDOM ZOOM ANGLE 33 CLEAR SUBTITLE 9. 10. 11. 12.
E8700UD(EN).qx4 06.12.26 18:14 Page 9 FUNCTIONAL OVERVIEW Buttons on remote control work in different ways for DVD Video, DVD Audio, Audio CD, Super Audio CD, MP3, JPEG, WMA and DivX®: Refer to the following table for correct use. DVD-Video, DVD-Audio VCD Super Audio CD, CD, MP3, JPEG, WMA DivX® • To turn on or standby the unit. • To turn on or standby the unit. • To turn on or standby the unit. • To turn on or standby the unit.
E8700UD(EN).qx4 06.12.26 18:14 Page 10 FUNCTIONAL OVERVIEW Tour of the Remote Control CLEAR Button DVD-Video, DVD-Audio VCD · To clear the markers. · To clear the numbers · To clear the markers. · To clear the numbers entered incorrectly. · To cancel the A point for A-B Repeat. MENU Button entered incorrectly. · To cancel the A point for A-B Repeat. · To call up the menu on (Super Audio CD, CD) · To clear the numbers entered incorrectly. entered incorrectly.
E8700UD(EN).qx4 06.12.26 18:14 Page 11 FUNCTIONAL OVERVIEW DVD-Video,DVD-Audio DISC SKIP Button Super Audio CD, CD, MP3, JPEG, WMA VCD English Tour of the Remote Control DivX® • To select a desired disc. • To select a desired disc. • To select a desired disc. • To select a desired disc. • To select a desired disc directly. • To select a desired disc directly. • To select a desired disc directly. • To select a desired disc directly.
E8700UD(EN).qx4 06.12.26 18:14 Page 12 FUNCTIONAL OVERVIEW • “A-CLEAr” is displayed on the front panel display while selecting ALL CLEAR. • “SHUFFLE” is displayed on the front panel display while setting the random playback. • “5-SHUFF” is displayed on the front panel display while setting the 5 Disc random playback. • “A-PLAY” is displayed on the front panel display while setting the all group playback.
E8700UD(EN).qx4 06.12.26 18:14 Page 13 CONNECTIONS English Description - Rear Panel 1 2 3 4 5 6 7 8 9 1. CONTROL CONNECTOR (RS-232C) This is a terminal for future system expansion. 2. HDMI OUT Jack Use an HDMI connection cable (commercially available) to connect to a display with an HDMI compatible port. 3. 5.1ch AUDIO OUT Jacks Use speaker cables (commercially available) to connect these jacks to the 5.1 ch Audio input jacks of your AV amplifier with 5.1-channel input terminals. 4.
E8700UD(EN).qx4 06.12.26 18:14 Page 14 CONNECTIONS The following shows examples of connections commonly used to connect the DVD player to TV and other components. If using this DVD player to play back a DVD in a Dolby Digital Multi channel surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks.
E8700UD(EN).qx4 06.12.26 18:14 Page 15 CONNECTIONS Analog 5.1-channel audio signals can be output from the DVD player. The multichannel audio signals recorded in packed PCM and the multichannel Super Audio CDs can be played back when an AV amplifier equipped with analog 5.1-channel audio inputs is connected. Front speaker Center speaker (left) Front speaker (right) AUDIO Subwoofer Surround speaker (left) AV amplifier with 5.1-channel audio input jacks Surround speaker (right) To 5.
E8700UD(EN).qx4 06.12.
E8700UD(EN).qx4 06.12.26 18:14 Page 17 CONNECTIONS A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (HighDefinition Multimedia Interface) connector allows digital transfer of the digital images of DVD-Video and other sources, DVD-Video, and the multi-channel sound of DVD-Audio.
E8700UD(EN).qx4 06.12.26 18:14 Page 18 DISC PLAYBACK Basic Playback DVD-V DVD-A VCD MP3 JPEG HDMI Setup CD WMA Super Audio CD 1 Press the HDMI button on the front panel to select the HDMI output mode. The output mode changes as follows every time the HDMI button is pressed. DivX® Getting started • • • The HDMI indicator on the front panel lights up when HDMI output mode is on. Turn on the power of the TV, amplifier and any other components which are connected to the DVD player.
E8700UD(EN).qx4 06.12.26 18:14 Page 19 DISC PLAYBACK DVD-V DVD-A 1 Press the TOP MENU button. • The title menu will appear. 2 If the feature is not available, symbol may appear on the TV screen. 3 Press the Cursor buttons (K / L / s / B) to select an item, and the ENTER button to confirm the selection. Some discs are recorded with the Bonus Group that can be played back by entering a password. Refer to the disc jackets. 1 In stop mode, press the GROUP button to open the group search screen.
E8700UD(EN).qx4 06.12.26 18:14 Page 20 DISC PLAYBACK Fast Forward / Reverse Search DVD-V DVD-A VCD MP3 Zoom CD WMA Super Audio CD DivX® 1 During playback, press the h or g button repeatedly to select a desired forward or reverse speed. Button DVD-V DVD-A VCD JPEG DivX® only Moving picture This function allows you to enlarge the video image and to pan through the zoomed image. 1 Press the ZOOM button during playback. • Playback will continue.
E8700UD(EN).qx4 06.12.26 18:14 Page 21 DISC PLAYBACK DVD-A VCD PBC OFF Marker Setup Screen CD JPEG Super Audio CD WMA MP3 DivX® There are two ways to begin playback a disc at a specific track. By using the SEARCH MODE button 1 Press the SEARCH MODE but__/ 15 ton. • The track search display appears. 2 Within 30 seconds, select a desired track number using the Numeric buttons. • For the disc with less than 10 tracks, press the track number directly.
E8700UD(EN).qx4 06.12.26 18:14 Page 22 DISC PLAYBACK REPEAT TRACK / GROUP / DISC VCD Program Playback Super Audio CD CD PBC OFF This function allows you to program a playback order of DVD-Audio, Audio CD, Super Audio CD, MP3, JPEG, or WMA in a desired sequence. To activate Repeat function, press the REPEAT button during playback. • The repeat mode changes as described below every time you press the button.
E8700UD(EN).qx4 06.12.26 18:14 Page 23 DISC PLAYBACK JPEG This function shuffles the playback order of tracks instead of playback in the original sequence. 1 In stop mode, press the MODE button. • The program screen will appear. 2 Press the Cursor buttons (K or L) to select a group, then press the ENTER button. Random Playback WMA PROGRAM 1 In stop mode, press the ABC DEF GHI ALL CLEAR 1/1 RANDOM button. • Press the CLEAR button to erase the most recently entered track.
E8700UD(EN).qx4 06.12.26 18:14 Page 24 DISC PLAYBACK This player recommends the use of files recorded at the following specifications: MP3 / JPEG / WMA Playback MP3 JPEG WMA When a CD-R or CD-RW disc with MP3, JPEG or WMA files is inserted in the DVD player and the MENU button is pressed, the file list will appear on display. The number of tracks is also displayed on the front panel. 1 Press the Cursor buttons (K or L) to select the desired group (folder) or track.
E8700UD(EN).qx4 06.12.26 18:14 Page 25 DISC PLAYBACK Kodak Picture CD 1 When Kodak Picture CD is inserted in the DVD player, Kodak Picture CD menu appear automatically on the TV screen. DivX® Playback DivX® This DVD player can play back DVD-R/RW and CD-R/RW discs recorded in DivX® format. When a DVD-R/RW or CDR/RW with DivX® files is inserted in the DVD player, the file list will appear automatically on the TV screen. The number of tracks will be also displayed on the front panel.
E8700UD(EN).qx4 06.12.26 18:14 Page 26 DISC PLAYBACK • Use the software recognised by DivX®, Inc. when you make DivX® files. • When using tools or utilities to make up DivX® files, read their instruction manual beforehand. • A DivX® file whose file size exceeds 2GB cannot be played back. • If a large-sized DivX® file is selected, it may take a while to start the playback (over 20 seconds sometimes).
E8700UD(EN).qx4 06.12.26 18:14 Page 27 • For JPEG, current track number/total track will be displayed. • For discs with DivX® files, current track number/total tracks, elapsed time and remaining time of the current track, and current playback status will be displayed. • Current repeat setting appears only when the Repeat setting is active. ( T: Track repeat/ G: Group (Folder) repeat/ D: 1 Disc repeat/ 5: 5 Disc repeat (DivX® only)).
E8700UD(EN).qx4 06.12.26 18:14 Page 28 DISC PLAYBACK NOTES: Slide Show Mode • The sound mode cannot be changed during playback of discs not recorded in double sound. • Some discs allow to change audio language setting on the disc menu. (Operation varies between discs. Refer to the manual accompanying the disc.) • For discs with DivX® files, the screen only displays MP3, MP2 or Dolby Digital audio. Other audio sounds will be displayed as “---”.
E8700UD(EN).qx4 06.12.26 18:14 Page 29 DISC PLAYBACK Stereo Sound Mode DVD-V Some DVD discs contain scenes which have been shot simultaneously from various angles. You can change the camera angle when the ( ) mark appears on the screen. 1 Press the ANGLE button during playback. • The selected angle will be displayed on the display bar at the top of the screen.
E8700UD(EN).qx4 06.12.26 18:14 Page 30 DISC PLAYBACK Virtual Surround Black Level Setting DVD-V DVD-A VCD CD MP3 WMA You can enjoy stereo phonic virtual space through your existing 2 channel stereo system. 1 During playback, press the OFF MODE button repeatedly until the Virtual Surround setting appears. 2 Press the ENTER button to set it 1(Natural effect), 2(Emphasized effect) or OFF. 3 Press the RETURN button to exit.
E8700UD(EN).qx4 06.12.26 18:14 Page 31 DVD SETUP STILL MODE (Default : AUTO) DISPLAY STILL MODE AUTO FIELD FRAME PROGRESSIVE (Default: OFF) QUICK DISPLAY • Press the ENTER button repeatedly to turn ON or OFF. • The setting will be effective when you exit the setup screen by pressing SETUP. • When PROGRESSIVE is ON, P.SCAN appears on the DVD player’s display after you exit the setup screen. • Refer to page 13 for more details.
E8700UD(EN).qx4 06.12.26 18:14 Page 32 DVD SETUP BASS ENHANCER (Default: OFF) Speaker Setting for ANALOG AUDIO • Set to ON for sound output on the bass-woofer channel when 2-channel audio source is played back. • This function is effective only for the 5.1ch AUDIO OUT jacks. Set the AUDIO MODE to ANALOG and ANALOG AUDIO to MULTI CHANNEL to set this function. • When SUB WOOFER is set to NONE in the Speaker Configuration, BASS ENHANCER will be set to OFF automatically.
E8700UD(EN).qx4 06.12.26 18:14 Page 33 DVD SETUP Speaker Setting for HDMI AUDIO When HDMI AUDIO is selected for MULTI CHANNEL, the bass management setting menu will appear. Set the Speaker Configuration, delay time and channel level for each speakers (front, center, surround and sub woofer). English Use the Cursor buttons (K or L) to select the setting item, then press the ENTER button. • Press the Cursor buttons (K or L) to select the speaker to set, then press the ENTER button.
E8700UD(EN).qx4 06.12.26 18:14 Page 34 DVD SETUP Ratings Control Others Setting Ratings Control allows you to set a limit, which prevents your children from viewing inappropriate materials on DVDs. A fourdigit password that you establish will give you the control. RATING LEVEL You can set a viewing limit through Rating Level. Playback of the discs will stop if the disc’s general rating exceeds the limit you set. 1 Press the SETUP button in stop mode.
E8700UD(EN).qx4 06.12.26 18:14 Page 35 DVD SETUP NOTES: Reset to the Default Settings (except for Ratings Control) This allows you to return all selections of SETUP (except for RATINGS) to their default settings. 1 Press the SETUP button in stop mode. 2 Press the Cursor buttons (s or B) to select INITIALIZE, then press the ENTER button. 3 Press the Cursor buttons (K or L) to select YES, then press the ENTER button. 4 Press the SETUP button to exit.
E8700UD(EN).qx4 06.12.26 18:14 Page 36 TROUBLESHOOTING GUIDE If the DVD player does not perform properly when operated as instructed in this Operating Instruction, check the player, consulting the following checklist. Problem Solution No power – Check if the AC power cord is properly connected. – Unplug the AC power cord once, and wait for 5-10 seconds and then plug it in again.
E8700UD(EN).qx4 06.12.
E8700UD(EN).qx4 06.12.26 18:14 Page 38 TOKYO, JAPAN www.denon.com Printed in China 00D 511 4592 001 Denon Brand Company, D&M Holdings Inc.
