Operation Manual

Adjusting the Equalizer

Select “EQ”.

Adjust the Treble or Bass up or down.

Select the Reset button to restore the default settings.

Adjusting the Audio Quality

Selects the transcoding option for rebroadcasting audio from one HEOS

device to another HEOS device (or group of devices) across the network.

When set to “Normal”, high bit rate audio sources originating from the first

device (such as AUX input, WAV, FLAC and PCM) will be transcoded to

ensure the highest level of reliability for the audio stream.

Select “Quality”.

Select Normal (default) or High.

If you have selected High and you experience audio dropouts when streaming

sources from one device to other devices, please select Normal (default).

Adjusting the Status Light Brightness

Select “Status Light”.

Adjust the brightness up or down or set the slider to

the OFF position to completely disable the status light.

Contents Setup Use Troubleshooting Status LED Appendix