Setup Contents Use Troubleshooting . WIRELESS SPEAKER BATTERY FOR HEOS 1 Owner’s Manual .
Contents Setup Introduction Before your begin System requirements Network requirements Controller requirements Getting to know your HEOS speaker Getting to know your battery (sold separately) Part names and functions Front panel Controls Back panel Placing your HEOS speaker Wall or ceiling mounting Powering your HEOS speaker Getting the HEOS app Setting up your first HEOS speaker Adding more HEOS devices Adding wired HEOS devices Adding wireless HEOS devices Use Troubleshooting 6 7 7 7 8 9 10 11 11 12 1
Contents Setup Adjusting the balance Swapping left and right channels in a stereo pair Removing a stereo pair Using the now playing queue Play Now Play Now & Replace Queue Play Next Add to End of Queue Rearranging the now playing queue Deleting songs from the play queue Deleting all songs from the play queue Saving playlists Performing repeat and shuffle playback Using the favorite Adding to HEOS favorite Deleting station from the HEOS favorite Use Troubleshooting 35 36 36 37 37 37 37 37 38 38 39 39 39
Contents Setup Use Updating your system Advanced features Sharing music from your mobile device Wireless performance Submit diagnostics Resetting your controller app Power management Power modes Quick Start Mode Deep Standby Off Setting up HEOS 1 Go Pack Connecting the battery Charging the battery Connecting the Splashguard Close splashguard Turning off/on the battery Basic troubleshooting My speaker won’t connect to my network using the audio cable The front LED of HEOS 1 flashes repeatedly Cannot pair
Contents Setup Use Status LED table Battery indicator of HEOS 1 Go Pack When connected to the AC charger/power supply (charging) When running on battery power Supported file types and codecs Specifications Speaker specifications HEOS 3 HEOS 1 Information Trademarks License License information for the software used in the unit Troubleshooting 59 67 67 67 68 69 69 69 71 73 73 74 74 5 Status LED Appendix
Contents Setup Use Troubleshooting Status LED Appendix Thank you for purchasing this HEOS product. To ensure proper operation, please read this owner’s manual carefully before using the product. NOTE 0 THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE. For latest information, please visit http://www.HEOSbyDenon.
Contents Setup Use Troubleshooting Status LED Appendix Before your begin NOTE 0 If you have already installed at least one HEOS device, please skip to the section “Adding more HEOS devices” (v p. 18). System requirements Before you begin installing your first HEOS speaker, please make sure you understand and meet a few basic requirements. o Network requirements Wireless Router - In order to use your HEOS music system, you should have a working wireless (Wi-Fi) network in your home.
Contents Setup Use Troubleshooting Status LED Appendix o Controller requirements . . You can control your HEOS wireless multi-room sound system using the free HEOS app on any iOS or Android mobile device that meets these minimum requirements: iOS Minimum Requirements 0 iOS version 7.0 or later 0 iPhone® 4 or newer 0 iPad® 2 or newer 0 iPod touch® (5th generation) or newer Android Minimum Requirements 0 Android OS version 4.
Contents Setup Use Troubleshooting Status LED Appendix Getting to know your HEOS speaker Unpack your speaker from the box and verify that the following items are included: HEOS Speaker HEOS 3 HEOS 1 or QUICK STR T GU IDE Quick Start Guide Warranty (North America model only) Safety Instructions Extended Protection Plan (North America model only) (North America model only) (European model only) Ethernet cable Power supply .
Contents Setup Use Troubleshooting Status LED Appendix Getting to know your battery (sold separately) Unpack your battery from the box and verify that the following items are included: Splashguard Rechargeable battery QUICK STR T GU IDE Safety Instructions Warranty (North America model only) .
Contents Setup Use Troubleshooting Status LED Appendix Part names and functions o Front panel HEOS 3 HEOS 1 HEOS 1 + Go Pack q q q w . w A Speakers B Status LED Please refer to the “Status LED table” for LED color and state meaning. (v p.
Contents Setup Use Troubleshooting Status LED o Controls HEOS 3 HEOS 1 q q w . w A Mute button (:) Mutes or unmutes the HEOS device’s volume. B Volume up/down buttons (+, –) Adjusts the HEOS device’s volume level up or down.
Contents Setup Use Troubleshooting Status LED Appendix o Back panel HEOS 3 HEOS 1 q q w w e Q0 r USB 5V/1A NETWORK CONNECT r . t HEOS 1 + Go Pack u o y i t e i y u o A Threaded Mounting Hole Used to mount this unit on a wall or ceiling. Q1Q2 D Bluetooth Button (V) Used in the Bluetooth pairing settings (v p. 24). B Safety Wiring Hole Used to prevent from dropping. E Power Input (DC IN) Used to connect the external power supply (v p. 16).
Contents Setup HEOS 3 HEOS 1 Use Troubleshooting Status LED Appendix J Cap Close this cap securely to maintain the splash-proof capabilities. HEOS 1 + Go Pack K Battery/Charging Indicator Indicates the amount of remaining battery power and charging status. USB 5V/1A NETWORK Q0 CONNECT i uo Q1 Q2 . i uo L Status Button (X) 0 Used to check the amount of remaining battery power (v p. 67). 0 Turning off/on the battery (v p. 51).
Contents Setup Use Troubleshooting Status LED Appendix Placing your HEOS speaker You can place your HEOS device anywhere you want to enjoy great sounding music. Please follow these simple guidelines when determining where to place your speaker… 0 The HEOS speaker must be within range of your wireless network. 0 The HEOS speaker is designed to sound best when placed 3 to 12 inches (8 - 30 cm) from a wall.
Setup Contents Use Troubleshooting Status LED Appendix Powering your HEOS speaker Connect the power cord included in the box to the back of the speaker and the plug to a wall outlet. The speaker is capable of automatically switching between 100 - 240 V. HEOS 1 . HEOS 3 Getting the HEOS app . The HEOS app is the heart of the HEOS experience.
Contents Setup Use Troubleshooting Status LED Appendix Setting up your first HEOS speaker Once you have placed your speaker in your listening room and have downloaded the HEOS app, you are ready to configure your speaker for music playback. This involves following a few simple steps to get the speaker connected to your existing home network: Caution 0 DO NOT connect the Ethernet cable if you are connecting your speaker to a wireless network.
Setup Contents Use Troubleshooting Status LED Appendix Adding more HEOS devices The HEOS wireless multi-room sound system is a true multiroom audio system that automatically synchronizes audio playback between multiple HEOS devices so that the audio coming from different rooms is perfectly in sync and always sounds amazing! You can easily add up to 32 HEOS devices to your HEOS system.
Contents Setup Use Troubleshooting Status LED Appendix Using your HEOS speaker Once you have your HEOS device connected to your network and the HEOS app installed on your mobile device, it’s easy to start enjoying your favorite music. You can listen to something different on every HEOS devices or the same music perfectly synchronized on all HEOS devices.
Contents Setup Use Troubleshooting Status LED Appendix Playing music stored on your mobile device Listening to radio The HEOS system includes access to more than 100,000 free internet radio streams from all corners of the globe via the TuneIn radio service. Just select the TuneIn logo from the main “Music” menu and browse among the 100,000 stations neatly organized into popular categories and select a station that appeals to your mood.
Contents Setup Use Troubleshooting Playing music from your networked PC or NAS 3 Appendix Audio signal PC Select “Music Servers” from the “Music” tab. Select the name of your networked PC or NAS (Network Attached Storage) server. Browse the music on your PC/NAS and select something to play. .
Contents Setup Use Troubleshooting Playing music from the AUX input 1 Audio signal Connect an audio device with a 3.5 mm stereo audio output to the AUX input on your speaker using the included 3.5 mm stereo audio cable. When a stereo audio cable is connected to AUX IN, the source automatically switches to Inputs. NOTE 0 When there is a cable connected to AUX IN, select “Inputs” from the “Music” tab. Initiate playback on the audio device. .
Contents Setup Use Troubleshooting Playing music from a USB device 1 2 3 4 Status LED Audio signal Insert a FAT32 formatted USB device into the USB port on the back of the HEOS speaker. Select “USB Music” from the “Music” tab. Select the name of your HEOS speaker. Browse the music on your USB device and select something to play. NOTE . 0 It may take several minutes for the name of your HEOS device to appear in the “USB Music” list if you have a large number of files on your USB device.
Contents Setup Use Troubleshooting Playing music from Bluetooth device Status LED Appendix Audio signal o Pairing the HEOS speaker with your Bluetooth devices 1 2 3 Activate the Bluetooth setting on your mobile device. Press and hold the Bluetooth button (V) located on the back of the HEOS speaker for 3 seconds and release the button when you see a pattern of two green flashes on the status LED. Select “HEOS speaker“ from the list of available Bluetooth devices.
Contents Setup Use Troubleshooting Status LED Appendix o Changing your HEOS account HEOS account 1 2 o What is a HEOS account? A HEOS account is master account or “keychain” for managing all of your HEOS music services with one single username and password. 3 4 o Why do I need a HEOS account? With the HEOS account you just have to enter your music services login names and passwords one time. This allows you to easily and quickly use multiple controller apps on different devices.
Contents Setup Use Troubleshooting Status LED Appendix o Changing music service settings Playing from streaming music services 1 2 A music service is an online music company that provides access to vast music collections via free and/or paid subscriptions. Depending upon your geographical location, there are several options to choose from. For more information about which services are available in your area please visit http://www.HEOSbyDenon.
Contents Setup Use Troubleshooting If you connected external audio source components to any of your HEOS speakers inputs, you can rename the default input names to describe the actual source or hide any inputs that are not being used. 2 3 4 Appendix o Changing the name of the inputs Managing inputs 1 Status LED Select the Settings a icon located in the upper left corner of the main “Music” menu to display the Settings menu. Select “Music Sources”. 1 2 3 Select "Name".
Contents Setup Use Troubleshooting Managing your phone Your smartphone or tablet can be hidden if it does not need to be in the “Music Sources” menu. 1 2 3 4 Select the Settings a icon located in the upper left corner of the main “Music” menu to display the Settings menu. Select “Music Sources”. Select “This iPhone/iPod/iPad/Phone”. Toggle “This iPhone/iPod/iPad/Phone” to OFF to prevent the service logo from appearing on the main “Music” menu.
Contents Setup Use Troubleshooting Listening to the same music in multiple rooms Status LED Appendix Rooms Rooms Drag one room into another to group them Drag one room into another to group them Dining The HEOS system is a true multiroom audio system that automatically synchronizes audio playback between multiple HEOS devices so that the audio coming from different rooms is perfectly in sync and always sounds amazing! You can easily add up to 32 HEOS devices to your HEOS system.
Contents Setup Use Troubleshooting o Ungrouping rooms 1 2 Tap the “Rooms” tab. Appendix Rooms Rooms Drag one room into another to group them Drag one room into another to group them Dining Dining Song Name 1 Press and hold your finger on room that you want to remove from the group. Song Name 1 Living Living Song Name 2 NOTE Song Name 2 Living 0 You can not remove the first room that started playing the music before grouping. 2 Drag it out of the group and lift your finger.
Contents Setup Use Troubleshooting o Grouping all rooms (party mode) Rooms You can easily group 16 rooms together into Party Mode by using a “pinch” gesture. Drag one room into another to group them Dining 2 Appendix Rooms Drag one room into another to group them Dining+Living+... Song Name 1 Song Name 1 Tap the “Rooms” tab. Living Place two fingers on the screen over the list of rooms. Dining Song Name 2 3 Quickly pinch your two fingers together and release.
Contents Setup Use Troubleshooting o Ungrouping all rooms You can easily ungroup all of your rooms and exit Party Mode by using a “spread” gesture. 3 Appendix Rooms Rooms Drag one room into another to group them Drag one room into another to group them Dining Song Name 1 Tap the “Rooms” tab. 2 Dining Song Name 1 Living Dining Place two fingers close together on the screen over list of rooms. Song Name 2 Living 3 Quickly spread your two fingers apart from each other and release.
Contents Setup Use Troubleshooting Status LED Stereo pairing o Creating a stereo pair Rooms Drag one room into another to group them A matching pair of HEOS 1 or HEOS 3 speakers that have been grouped together (see above) can be saved as a persistent stereo pair where one speaker outputs the left channel of audio and the other speaker outputs the right channel of audio. Paired speakers will then appear as a single room (with two speakers playing music) in the Rooms list.
Contents Use Troubleshooting 6 Tap on the Stereo Pair switch to pair the two speakers. Tap the Back arrow B to return to the list of Rooms. Status LED Rooms Drag one room into another to group them Dining L + Dining R 5 Stereo Pair Tap the Check Mark i icon to exit Edit mode. The group of two matching speakers will now appear as a single room. You can change the name of the stereo paired room at any time.
Contents Setup Use Troubleshooting Status LED o Changing the name of a stereo pair o Adjusting the balance 1 2 3 1 2 3 4 5 6 Tap the “Rooms” tab. Tap the Pencil e icon to enter Edit mode. Tap a Stereo Pair (a room which contains two matching HEOS speakers) to edit the group. 4 5 6 Tap “Name”. Select or enter a new name for your pair of speakers. Tap the Save i button to save your changes. 35 Appendix Tap the “Rooms” tab. Tap the Pencil e icon to enter Edit mode.
Contents Setup Use Troubleshooting o Swapping left and right channels in a stereo pair 1 2 3 4 5 6 Status LED Appendix o Removing a stereo pair 1 2 3 Tap the “Rooms” tab. Tap the Pencil e icon to enter Edit mode. Tap a Stereo Pair (a room which contains two matching HEOS speakers) to edit the group. 4 Tap on the Swap L&R switch to swap the left and right channels of the two speakers. 5 6 Tap the Back arrow B to return to the list of Rooms. Tap the Check Mark i icon to exit Edit mode.
Contents Setup Use Troubleshooting Status LED Appendix Using the now playing queue HEOS uses a Now Playing “Queue” to line up music that you want to listen to. Music can be selected from any of your local or online music sources (as long as they are not preprogrammed “radio” or “station” type streams). This feature works similarly to how a jukebox works. You select something to play (a song, album, playlist or even your entire music collection) and add it to the “Queue”.
Contents Setup Use Troubleshooting Rearranging the now playing queue 3 4 Appendix Deleting songs from the play queue Once you have songs lined up in your queue, you might want to rearrange the order or remove some songs: 1 2 Status LED You can remove songs one at a time from the Now Playing Queue: 1 2 Tap the “Now Playing” tab. Tap the Queue d icon in the upper right corner of the screen. 3 4 5 Tap the Pencil e icon to enter Edit mode.
Contents Setup Use Troubleshooting Deleting all songs from the play queue 3 Appendix Saving playlists You can remove all of the songs from the Now Playing Queue: 1 2 Status LED You can save the Now Playing Queue as a HEOS Playlist that you can recall later. The new playlist will be available from the Playlists button on the “Music” tab on every controller app connected to your HEOS system. Tap the “Now Playing” tab. 1 2 Tap the Queue d icon in the upper right corner of the screen.
Contents Setup Use Troubleshooting Status LED Appendix o Deleting station from the HEOS favorite Using the favorite 1 2 3 4 HEOS uses a "HEOS Favorite" to line up station you want to start play quickly the favorite stations. Station can be selected from online music sources such as "Radio" or "Station" type streams. "HEOS Favorite" will display a list of the stations of various services. o Adding to HEOS favorite Select a station of an online music source.
Contents Setup Use Troubleshooting Status LED Appendix Making speaker adjustments You can adjust specific settings for each of your HEOS speakers in your system: 1 2 3 Changing the wireless network connection Select the Settings a icon located in the upper left corner of the main “Music” menu to display the Settings menu. 1 Select “My Devices” to display a list of your HEOS devices. 2 Select the speaker you want to adjust. Select the network you want your speaker to join.
Contents Setup Use Troubleshooting Selects the transcoding option for rebroadcasting audio from one HEOS device to another HEOS device (or group of devices) across the network. When set to high bit rate audio sources originating from the first device (such as analog input, WAV, FLAC and PCM) will be transcoded to ensure the highest level of reliability for the audio stream. Select “EQ”. Adjust the “Treble” or “Bass” up or down. 1 2 NOTE 0 Select the Reset button to restore the default settings.
Contents Setup Use Troubleshooting The Wireless Power Savings feature saves power by turning off power to the wireless radio inside the HEOS device when the device is connected to an Ethernet network. If you disconnect the Ethernet cable from the HEOS device, Wireless Power Saving will automatically turn off and the wireless radio will turn on so that the HEOS device can be discovered over your wireless network.
Contents Setup Use Troubleshooting o Firmware upgrade 1 2 Appendix o About Viewing technical details about the HEOS device. Select “Advanced”. 1 2 3 Select “FIRMWARE UPDATE” tab. n Update status Manually check for a firmware upgrade. n Allow updates 3 Status LED ON: Allows updates OFF: Does not allow updates Select Save Settings to apply the new settings or Cancel Changes to revert to the previous settings. 44 Select “Advanced”. Select “ABOUT” tab.
Contents Setup Use Troubleshooting Status LED Appendix Updating your system HEOS has the ability to add enhancements and updated functionality via your high speed Internet connection. Follow the instructions on the screen to update the HEOS device and/or your controller App. 1 2 Select the Settings a icon located in the upper left corner of the main “Music” menu to display the Settings menu. Select “Software Update”.
Contents Setup Use Troubleshooting Status LED Appendix Advanced features There are a few advanced features of the HEOS system that you may want to explore once you become familiar with the basic operations. You can access the advanced features of the HEOS system by following these steps: 1 2 Wireless performance Select the Settings a icon located in the upper left corner of the main “Music” menu to display the Settings menu. You can check the wireless connection status of your HEOS device.
Contents Setup Use Troubleshooting Submit diagnostics If you are having trouble with your network or HEOS system, you may be asked by Denon technical support personnel to select this option. This feature will automatically send Denon technical support diagnostic information about your HEOS system. NOTE 0 No personal information is sent and your information will never be shared with anyone.
Contents Setup Use Troubleshooting Status LED Appendix Power management Power modes o Quick Start Mode o Deep Standby To save power, the device will automatically enter “Quick Start Mode” whenever there is no network access or playback for 20 minutes and will automatically resume to full power whenever the device is selected and playing music.
Contents Setup Use Troubleshooting Status LED Appendix Setting up HEOS 1 Go Pack Before using a new HEOS 1 speaker with HEOS 1 Go Pack, we recommend you first connect your HEOS 1 speaker to your home network to get the latest speaker updates and newest features. 2 Connecting the battery . Remove the cap from the bottom of the HEOS 1 speaker by turning the cap counter-clockwise and pulling it away from the speaker. 3 Turn the battery clockwise so that it is aligned with the shape of the speaker.
Contents Setup Use Troubleshooting Charging the battery Status LED Appendix Connecting the Splashguard Once your battery is fully charged, attach the Splashguard to the back of the speaker. . To charge the battery, connect the HEOS 1 power adapter between the speaker and a wall outlet. . 0 “Playing music from the AUX input” (v p. 22) 0 “Playing music from a USB device” (v p. 23) 0 “Playing music from Bluetooth device” (v p. 24) 0 It takes at least 3.
Contents Setup Use Troubleshooting Close splashguard Appendix Turning off/on the battery To turn off the battery, press and hold the button on the back of the battery for 2 seconds. The LEDs will flash quickly then turn off, indicating that the battery is off. Turning off the battery will conserve battery power while you are not playing music and HEOS 1 is not plugged in to AC power. To turn the battery back on, press and hold the button again for 2 seconds.
Contents Setup Use Troubleshooting Status LED Appendix Basic troubleshooting My speaker won’t connect to my network using the audio cable Solution Refer to Page 0 Make sure your mobile device is connected to your wireless network before setting up your speaker. 17 0 Alternatively, you can connect your speaker to your network router using the included Ethernet cable.
Contents Setup Use Troubleshooting Status LED Appendix Cannot pair a Bluetooth mobile device with the HEOS device Solution Refer to Page 0 The connection from the Bluetooth mobile device is malfunctioning. Power cycle the mobile device, remove the pairing information and re-pair the HEOS speaker to the mobile device. 0 Press and hold the Bluetooth button for 3 seconds and release the button when you see a pattern of two flashes on the status LED.
Contents Setup Use Troubleshooting Status LED Appendix Cannot hear Bluetooth music Solution Refer to Page 0 Your Bluetooth mobile device is not paired with HEOS speaker. Re-pair the HEOS speaker to the mobile device. － 0 The HEOS speaker is Wi-Fi mode or Aux-in mode etc. Pair and connect Bluetooth device to HEOS speaker. － 0 The Bluetooth mobile device is connected to another audio device.
Contents Setup Use Troubleshooting Status LED Appendix Music cuts out or delays sometimes Solution Refer to Page 0 Make sure your Internet connection is operating correctly. If you are sharing your network with other users or devices, they may 7 be using most of your bandwidth (especially if they are streaming video). 0 Make sure your speakers are within range of your wireless network.
Contents Setup Use Troubleshooting Status LED Appendix I hear distortion when using the AUX input Solution Refer to Page 0 The analog output signals from some sources can be fairly strong. If the input level of the source device is turned up high, it could overload the inputs of the HEOS device. This is unlikely to cause damage, but can cause distorted sound. Initially, set the volume of the source to a medium – low level, then turn it up as needed.
Contents Setup Use Troubleshooting Status LED Appendix Resetting your speaker Solution Refer to Page Resetting your speaker will clear out the wireless network info, EQ, and name but retain it’s current software. You will have to use Settings - Add Speaker to reconnect the speaker to your home network before it can be used. To reset your speaker, press and hold the Connect and Bluetooth buttons located on the back of the HEOS speaker for 5 seconds until the front LED begins to flash amber.
Contents Setup Use Troubleshooting Status LED Appendix Contact Denon For U.S. & Canada only: If you need further assistance with your HEOS product, please contact HEOS by Denon Customer Support Services below: Website: www.HEOSbyDenon.com/Support Email: Support@HEOSbyDenon.com Live Chat: www.HEOSbyDenon.
Contents Setup Use Troubleshooting Status LED Appendix Status LED table [Example] HEOS 1 Device Operation Front LED Action Rear LED Action No AC power or Deep Standby . . Off Description (off) (off) Booting . Plug in . (off) (blink) Ready-Configured and connected to your network . On . (off) (solid) . Not Connected to your network .
Contents Setup Device Operation Troubleshooting Description Status LED Front LED Action Appendix Rear LED Action Connecting to your network . Change Network Use . (off) (blink) . Not connected . (solid) (solid) . Connect button was pressed . (blink) (blink) . Cable connection is OK .
Contents Setup Device Operation Use Troubleshooting Description Status LED Front LED Action Appendix Rear LED Action . Connecting to your network . (off) (blink) . Configured and connected to your network . (off) (solid) . Error . (solid) (solid) . Updating .
Contents Setup Device Operation Use Troubleshooting Description Status LED Front LED Action Appendix Rear LED Action . Rebooting . (off) (blink) . Ready-Configured and connected to your network . (off) (solid) . Soft reset - Clear user settings . (solid) (fast blink) Reset . .
Contents Setup Device Operation Use Troubleshooting Description Status LED Front LED Action Appendix Rear LED Action . Rebooting . (off) (blink) . Ready-Not Configured . (solid) (solid) . Firmware Error . (off) (slow blink (NOT fade)) Errors . .
Contents Setup Device Operation Use Troubleshooting Description Status LED Front LED Action Appendix Rear LED Action . Network Error . (solid) (solid) . Volume Change . (off) (quick blink) . Mute . (off) (slow blink) . a WPS session is active .
Contents Setup Device Operation Use Troubleshooting Description Status LED Front LED Action Appendix Rear LED Action . WPS connected . (solid) (for 3 sec. solid) . WPS time-out . (solid) (for 3 sec. solid) . Quick Start Mode . (off) (solid) Power Management . .
Contents Setup Device Operation Use Troubleshooting Description Status LED Front LED Action Appendix Rear LED Action . . Bluetooth pairing is active (two blinks) . Connected（No Network) . (off) (one blink) . Bluetooth pairing is failed . Bluetooth (two blinks) (for 3sec. solid) 66 (for 3sec.
Contents Setup Use Troubleshooting Press and release the X button to check the remaining battery. The remaining battery level is displayed for approximately 5 seconds. The battery indicator uses 4 LEDs to indicate the approximate time remaining on the internal battery and the status of the charge process when connected to an AC power source. Mode The battery indicator is always lit when charging.
Contents Setup Use Troubleshooting Status LED Appendix Supported file types and codecs Frequency Sample Rate File Extension Codec Bit Rates 32/44.1/48 88.2/96/176.4 192 kHz 16/24 bit wav PCM 32 kHz 44.1 kHz 48 kHz 16 bit mp3 MPEG-1 Audio Layer 3 CBR/VBR 32 - 320 kbps 32 kHz 44.1 kHz 48 kHz 16 bit m4a aac AAC-LC 48 - 320 kbps 32 kHz 44.1 kHz 48 kHz 16 bit wma wma9 CBR CBR:48 - 192 kbps 44.1/48 88.2/96/176.4 192 kHz 16/24 bit flac flac --- 44.1/48 88.2/96/176.
Contents Setup Use Troubleshooting Specifications Speaker specifications o HEOS 3 Wireless LAN Network type: Conforming to IEEE 802.11a/b/g/n/ac Used frequency range: 2.4 GHz, 5 GHz General Operating temperature: 41 °F - 95 °F (5 °C - 35 °C) Power supply: AC 100 – 240 V, 50/60 Hz Power consumption: 22 W Power consumption in Quick Start Mode: 4.0 W Power consumption in Deep Standby Mode: 0.
Contents Setup Use Troubleshooting Status LED Dimensions 5 3/64 (128) 10 23/32 (272) 5 5/8 (143) 6 9/64 (156) Unit : in. (mm) 6 9/64 (156) 5 1/8 (130) . 10 53/64 (275) Weight : 4 lbs 3 oz (1.9 kg) For the purpose of improvement, the specifications and design are subject to change without notice.
Contents Setup Use Troubleshooting o HEOS 1 Wireless LAN Network type: Used frequency range: General Operating temperature: Power supply: Power consumption: Power consumption in Quick Start Mode: Power consumption in Deep Standby Mode: Max Analog Input: Conforming to IEEE 802.11a/b/g/n/ac 2.4 GHz, 5 GHz 41 °F - 95 °F (5 °C - 35 °C) AC 100 – 240 V, 50/60 Hz 20 W 4.5 W 0.
Contents Setup Use Troubleshooting Status LED Dimensions 8 7/16 (214) 7 7/16 (189) Unit : in. (mm) 5 1/16 (129) 5 1/16 (128) . 5 1/16 (129) Weight: HEOS 1 : 3 lbs 1.4 oz (1.4 kg) HEOS 1 + Go Pack : 3 lbs 12.0 oz (1.7 kg) For the purpose of improvement, the specifications and design are subject to change without notice.
Contents Setup Use Troubleshooting Status LED Appendix Information Trademarks . . Android, Google Play, and the Google Play logo are trademarks of Google Inc. . The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc. is under license. Other trademarks and trade names are those of their respective owners. . Apple, the Apple logo, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S.
Contents Setup Use Troubleshooting Status LED Appendix License n LGPL o License information for the software used in the unit Open Source Used ffmpeg glibc libmms About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you may procure, modify or distribute the source code of the GPL/LGPL software that is used in the product.
Contents Setup Use Troubleshooting n e2fsprogs-libs-1.40.8/lib/uuid Status LED Appendix n expat-2.0.1 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers. 1.
Contents Setup Use Troubleshooting n getopt Status LED Appendix n jQuery http://cvsweb.netbsd.org/bsdweb.cgi/src/lib/libc/stdlib/ Copyright (c) 1987, 1993, 1994 The Regents of the University of California. All rights reserved. Copyright 2014 jQuery Foundation and other contributors http://jquery.
Contents Setup Use Troubleshooting Status LED Appendix n libtar-1.2.11 n libpcap-1.4.0 Copyright (c) 1998-2003 University of Illinois Board of Trustees Copyright (c) 1998-2003 Mark D. Roth All rights reserved.
Contents Setup Use Troubleshooting n mDNS 320.10.80 Status LED Appendix n mongoose The majority of the source code in the mDNSResponder project is licensed under the terms of the Apache License, Version 2.0, available from:
Contents Setup Use Troubleshooting n openssl-1.0.0d Status LED Appendix THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Contents Setup Use Troubleshooting n portmap-6.0 Status LED Appendix n pstdint.h-0.1.12 Copyright (c) 1990 The Regents of the University of California. z All rights reserved. z Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: z BSD License: z Copyright (c) 2005-2011 Paul Hsieh z All rights reserved.
Contents Setup Use Troubleshooting n rl78flash 2000.3.1 Status LED Appendix n sqlite 2003.5.7 License ======= The MIT License (MIT) Copyright (c) 2012 Maxim Salov SQLite Copyright SQLite is in the Public Domain All of the code and documentation in SQLite has been dedicated to the public domain by the authors.
Contents Setup Use Troubleshooting n strlcpy.c , v1.11 Status LED Appendix n tinyxml 2002.4.3 z Copyright (c) 1998 Todd C. Miller www.sourceforge.net/projects/tinyxml Original file by Yves Berquin. z Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
Contents Setup Use Troubleshooting n Tremor Status LED Appendix n zlib http://wiki.xiph.org/index.php/Tremor Copyright (c) 2002, Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: http://www.zlib.net/ zlib.h -- interface of the ‘zlib’ general purpose compression library version 1.2.
Contents Setup Use Troubleshooting n The Spotify software is subject to third party licenses found here: www.spotify.
HEOSbyDenon.com 85 3520 10467 00ADA Copyright © 2016 D&M Holdings Inc. All Rights Reserved.
