User Guide

o
About wireless power saving
The Wireless Power Savings feature saves power by turning off power
to the wireless radio inside the HEOS device when the device is
connected to an Ethernet network. If you disconnect the Ethernet
cable from the HEOS device, Wireless Power Saving will automatically
turn off and the wireless radio will turn on so that the HEOS device can
be discovered over your wireless network.
NOTE
0
If Wireless Power Savings is ON, Wi-Fi power will be temporarily turned on
when accessing the My Devices - (My Devices) - Network screen in the HEOS
app or whenever the Connect button on the device is pressed.
o
Firmware upgrade
1
Select “Advanced”.
2
Select “FIRMWARE UPDATE” tab.
n
Update status
Manually check for a firmware upgrade.
n
Allow updates
ON: Allows updates
OFF: Does not allow updates
3
Select Save Settings to apply the new settings or
Cancel Changes to revert to the previous settings.
Contents Setup Use Troubleshooting Status LED Appendix
50