Professional Digital Mixer and Controller MC6000MK2 Owner’s Manual
FCC INFORMATION (For US customers) 1. COMPLIANCE INFORMATION Product Name: Professional Digital Mixer and Controller Model Number: MC6000MK2 Denon Professional div. D&M Professional 1100 Maplewood Drive Itasca, IL 60143 Tel. 630-741-0330 2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product.
CAUTION: (English) VORSICHT: 2. Keep these instructions. Um dieses Gerät vollständig von der Stromversorgung abzutrennen, trennen Sie bitte den Netzstecker von der Wandsteckdose ab. Die Hauptstecker werden verwendet, um die Stromversorgung zum Gerät völlig zu unterbrechen; er muss für den Benutzer gut und einfach zu erreichen sein. Setzen Sie Batterien nicht übermäßiger Wärme aus, z. B. Sonnenstrahlung, Feuer oder dergleichen. 3. Heed all warnings. 4. Follow all instructions. 5.
• Hantera nätkabeln varsamt. • • • • • • • • • • • • • Specifications • Troubleshooting • Håll i kabeln när den kopplas från el-uttaget. Utsätt inte apparaten för fukt, vatten och damm. Koppla loss nätkabeln om apparaten inte kommer att användas i lång tid. Täpp inte till ventilationsöppningarna. Se till att främmande föremål inte tränger in i apparaten. Se till att inte insektsmedel på spraybruk, bensen och thinner kommer i kontakt med apparatens hölje.
Before use • DECLARATION OF CONFORMITY (English) • ÜBEREINSTIMMUNGSERKLÄRUNG (Deutsch) • DECLARATION DE CONFORMITE (Français) • DICHIARAZIONE DI CONFORMITÀ (Italiano) • DECLARACIÓN DE CONFORMIDAD (Español) • ÖVERENSSTÄMMELSESINTYG (Svenska) Connections Our products following the provisions of EC/EU directives, that as follows; LV: 2006/95/EC EMC: 2004/108/EC RoHS: 2011/65/EU ErP: EC regulation 1275/2008 and its frame work directive 2009/125/EC Installing and setting up supplied software Unse
Connections This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning battery disposal. This product and the supplied accessories, excluding the batteries, constitute the applicable product according to the WEEE directive.
Before use Before use Accessories·····················································································2 Main features··················································································2 About this manual·········································································3 Cautions on handling·····································································3 Troubleshooting···································································25 Specifications···········
Main features e or r t Conduction noise or interference noise may cause this unit to malfunction. Therefore, when connecting this device to a computer, connect using the USB cable included. Part names and functions NOTE 4. MIC echo function • Equipped with an echo function dedicated for MIC input. • Amount of echo can be adjusted using the MIC echo adjustment knob. Other functions 3. USB AUDIO interface • Supports mixed audio and audio from the MIC or CH3/4 to a PC for USB Recording.
nnSymbols nnIllustrations Note that the illustrations in these instructions are for explanation purposes and may differ from the actual unit. • When going on vacation or leaving home for long periods of time, be sure to unplug the power cord from the power outlet. • About condensation If there is a major difference in temperature between the inside of the unit and the surroundings, condensation (dew) may form on the operating parts inside the unit, causing the unit not to operate properly.
Before use Connections NOTE Connections Input terminal connection Connecting external devices and MIC  AUDIO OUT L R Preparations Cables used for connection SIGNAL GND CD player External device 2 External device 1 AUDIO OUT L R AUDIO OUT L R AUDIO OUT L R R L R L R L R L R L R L R L R Select the cables according to the equipment being connected.
Outputting to amps Connecting of the booth output terminal AUDIO IN AUDIO IN L R L R R L R BALANCED IN R L Basic operations L Balanced monitor amp Installing and setting up supplied software Unbalanced main amp Connections Balanced main amp Before use Output terminal connections USB settings Other functions Part names and functions  Troubleshooting  Switch the output audio. STEREO : Outputs stereo audio. MONO : Outputs monaural mixed audio.
nnCompatible computers NOTE Insert the plug fully and securely into the socket. Incomplete connection to the power supply may cause damage to the unit, or noise. Installing and setting up supplied software AC adapter cable holder Basic operations • Computers running the following computer OS versions can be connected to this unit. • Mac OS X 10.
Before use Installing and setting up supplied software (Be sure to follow these instructions) The browse screen for the disc drive is displayed. 2 Click “Asio Driver Installation”. 3 Click “Next >”. The ASIO Driver Setup Wizard is launched. 5 DENON DJ ASIO for DJ Controller - InstallShield Wizard Click “Next >”. A screen for verifying the folder in which the ASIO driver is to be installed appears. Click Next to install to this folder, or click Change to install to a different folder.
a shortcut, check the check box and click 7 To“Nextcreate 8 Click “Install”. >”. the following installation completion screen is 9 When displayed, click “Finish”. Installation begins. DENON DJ ASIO for DJ Controller - InstallShield Wizard DENON DJ ASIO for DJ Controller - InstallShield Wizard Ready to Install the Program DENON DJ ASIO for DJ Controller - InstallShield Wizard InstallShield Wizard Completed The wizard is ready to begin installation.
Starting up q Devices (Device list) About the control panel screen y MC6000MK2 • You can select one device at a time. • You can set multiple devices to enable at the same time. Sampling Rate Device Description w Enable/Disable This button is used for switching a device selected in q (Devices) to enable or disable as an ASIO device. • When only one device is connected to the computer, “Enable” is always selected.
u r OK/Cancel y t Bit Resolution MC6000MK2 Selected bit resolution is displayed. • This unit only supports 16 bit. Sampling Rate Device Description 44.1kHz 48.0kHz 88.2kHz 96.0kHz Device Name: MC6000MK2 Unit Number. 1 Software Version: Audio input channels: 0 Audio output channels: 4 Sampling frequency: 44.1 kHz Bit resolution: 16 bit Audio buffer size: 512 y Sampling Rate The sampling rate selection is displayed here.
1 Download “Serato DJ Intro” from the download website. 2 Double-click the downloaded file. 3 Double-click “Serato DJ Intro”. 4 Follow each step in the installation screen for installation. “Serato DJ Intro” from the download website. 1 qw Download Double-click the downloaded file. The Serato DJ Intro disc icon is displayed on the desktop. View all of the downloaded file in a file browser. A window opens and the Serato DJ Intro installation starts.
チャンネル入力ソース Channel input source 切り替えつまみ select knob LEVEL Basic operation 1 Press the power operation switch. The unit is powered ON, and DECK 1/3 and the track select knob light up.
When you press the button, it lights up and the MIC input is switched ON. SHIFT nnEchoing the MIC input nnEnabling the ducking function Front panel LEVEL MIC2 EQ LOW/MID/HI SPLIT CUE MIC ECHO You can output MIC audio together with the master audio from the booth output terminals. This function is handy when you do or do not want route the MIC sources through the BOOTH output.
Before use USB settings You can select one of three modes for audio signals from the USB audio output. Use the USB audio output source select switch on the rear panel to select the mode.
KEY LOCK LOOP IN/OUT AUTO LOOP LOOP IN/OUT KEY LOCK AUTO LOOP Power 電源スイッチ LOAD operation 01 switch Filter/video switching mode On this unit, you can switch between controlling the filter function or video function using the Filter/Video adjustment knob and Filter/Video ON/OFF switching button. The unit can control the sensitivity of the touch sensor for the Jog wheel in 9 steps (–4 to 0 to +4).
MIDI command input/output Depending on the computer specifications and OS type, the computer may not be able to receive the MIDI commands transmitted from this unit correctly. In this case, set the MIDI command transmission interval time to a larger value using the following operation. (The larger the value, the slower the control response.
nnMIDI command list Send command DEC Items HEX 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 85 86 82 83 85 0x52 0x53 0x55 A#5 B5 C#6 86 0x56 D6 88 89 90 91 92 93 94 95 96 97 98 99 100 101 76 0x58 0x59 0x5A 0x5B 0x5C 0x5D 0x5E 0x5F 0x60 0x61 0x62 0x63 0x64 0x65 0x4C E6 F6 F#6 G6 G#6 A6 A#6 B6 C7 C#7 D7 D#7 E7 F7 E5 108 0x6C C8 109 0x6D C#8 110 0x6E D8 111 77 105 106 107 0x6F 0x4D 0x69 0x6A 0x6B D#8 F5 A7 A#7 B7 Note ON: Note ON: 64 0x40 Note OFF: 0 Note OFF: 0x00 S
# Items Command EVENT HEX DEC MIDI command Number HEX Note# 0x52 – 84 0x54 – 85 0x55 86 0x56 87 0x57 88 0x58 89 0x59 90 0x5A 91 0x5B 92 0x5C 93 0x5D 94 0x5E 101 0x65 102 0x66 TRACK SELECT KNOB 94 Increment/Decrement 95 96 97 EFX1 KNOB (FX1) Increment/Decrement EFX2 KNOB (FX1) Increment/Decrement EFX3 KNOB (FX1) Increment/Decrement Control Change 0xBn – 0x00 – 0x7F 0x00 – 0x7F – Increment 0x00 Decrement 0x7F – 0x00 – 0x7F 0x00 – 0x7F – Increment 0x00 Decrement 0x7
Reception commands ON TRG: 74 OFF TRG: 75 Blink ON TRG: 76 ON TRG: 0x4A OFF TRG: 0x4B Blink ON TRG: 0x4C MON CUE CH1 MON CUE CH1 Dimmer MON CUE CH2 MON CUE CH2 Dimmer MON CUE CH3 MON CUE CH3 Dimmer MON CUE CH4 MON CUE CH4 Dimmer X-F LINK (AUDIO) X-F LINK (VIDEO) VIDEO (L) VIDEO (R) METER 4 (CH1) METER 5 (CH1) METER 6 (CH1) METER 7 (CH1) METER 8 (CH1) METER 9 (CH1) METER PEAK (CH1) METER 4 (CH2) METER 5 (CH2) METER 6 (CH2) METER 7 (CH2) METER 8 (CH2) METER 9 (CH2) METER PEAK (CH2) METER 4 (CH3) METER 5 (C
Before use Part names and functions The top panel is explained for Serato DJ Intro. For buttons not explained here, see the page indicated in parentheses ( ). q Beats select knob (BEATS) q w w Tap button (TAP) Sets the BPM value used for the effects. Press this button repeatedly to measure the BPM value from the interval between presses. e r t o e Effect adjustment knob Adjusts the effect balance.
With this ON, the key does not change even if you adjust the tempo during playback. Q2 Sample mode switching button (SAMPLE) e t y u i E0 W9 o Performs the search operation or bend operation. Q4 Pitch fader slider Adjusts the playback pitch. • Move the knob toward the “–” direction to slow down the pitch and the “+” direction to speed up the pitch.
Moves the cursor position. • Press FWD while holding down Q0 SHIFT to register the selected file to the PREPARE list. e W7 Track select knob···························· (12, 15, 16) t y u i E0 W9 o Adjusts the filter cut off frequency. USB settings Q0 Q1 Q2 Q3 W5 W4 W3 W2 W1 Switches the filter function ON/OFF.
R3 R1 R0 E4 E5 E6 E7 E8 (MIC 1/2 LEVEL)····································· (13, 16) (MIC ON 1/2)················································ (13) E3 Ducking ON/OFF switching button E4 Echo ON/OFF switching button (ECHO ON 1/2)············································· (13) • Switches the MIC echo ON/OFF. • This can be set separately for MIC 1 and MIC 2.
Rear panel For buttons not explained here, see the page indicated in parentheses ( ). Before use Front panel For buttons not explained here, see the page indicated in parentheses ( ). Connections t q Headphone jack (PHONES)························· (13) To prevent hearing loss, do not raise the volume level excessively when using headphones. (LEVEL)························································· (13) Adjusts the output level for signals that are output from the headphone jack.
Before use Troubleshooting Installing and setting up supplied software Page 6 4, 5, 6 12 Basic operations 13 – 12 4, 5, 6 12 USB settings – – Other functions Part names and functions – – – Troubleshooting Symptom Cause/Solution Power does not turn • Check the connection of the AC adapter power plug to the outlet and on. the connection of the DC plug to the unit. There is no sound, or • Check the connections for all devices. the sound is too quiet.
• PHONO inputs Input impedance: Level: Signal to Noise ratio: • LINE 3, 4 inputs zzFor the purpose of improvement, the specifications and design are subject to change without notice. Stereo, balanced XLR terminal (1: Ground, 2: Hot, 3: Cold) 24 bit Over 600 Ω/ohms + 4 dBu (Max + 24 dBu) When RL=100 kΩ/kohms 20 Hz – 20 kHz (±1 dB) Less than 0.
Power on/off······················································· 12 vvR Rack mount brackets············································ 3 Rear panel··························································· 24 vvS Serato DJ Intro···················································· 11 vvT Top panel····························································· 20 Touch sense sensitivity······································· 15 USB settings vvU USB audio output·········································
Before use System diagram Connections Installing and setting up supplied software Basic operations USB settings Other functions Part names and functions Troubleshooting Specifications Index System diagram 28
nn How to Obtain Warranty Performance THIS WARRANTY IS VALID IN THE U.S.A. ONLY. nn Length of Warranty If your product does not require service, but you have questions regarding its operation, please contact our Technical Services Department as listed below. D&M Professional AMERICA http://usa.d-mpro.com/ You can find the contact details on this website. In Europe and Asia (except Japan), the warranty of this product is supplied by your local importer.
Other functions 18 11/32 (460.0) Part names and functions 45/64 (17.7) USB settings 27/32 (21.5) Basic operations Troubleshooting 1 57/64 (48.0) Installing and setting up supplied software Specifications 5/64 (2.0) 10 3/64 (255.0) 7/16 (11.0) Connections Before use nnDimensions Unit : in. (mm) Weight : 9 lbs 8 oz (4.
3520 10300 00AP
