Owner`s manual

7
ENGLISH
Getting started
Basic connections Basic operation Troubleshooting Specifi cations IndexAdvanced connections Advanced operation Explanation terms
Connecting the power cord
Wait until all connections have been completed before connecting the
power cord.
To household
power outlet
(AC 230 V, 50 Hz)
Power cord
(supplied)
NOTE
• Insert the plugs securely. Loose connections will result in the
generation of noise.
• Do not use any cord other than the provided power cord.
[AMPLIFIER POWER]
VOLUME
VOLUME
<POWER>
<SOURCE DIRECT>
<BASS>
<TREBLE>
<BALANCE>
Button located on both the main unit and
the remote control
BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control [BUTTON]
Symbols used to indicate buttons in this manual
Basic operation
Before use
1
Turn the VOLUME all the way down.
2
Set <SOURCE DIRECT> to “OFF”.
3
Set <BASS>, <TREBLE> and <BALANCE> to the
center positions.
4
Press <POWER>.
• The power indicator blinks red for several seconds, then
lights green.
• When set to “jOFF”, the power turns off.
Turning the power off
1
Press [AMPLIFIER POWER].
The power is set to the standby mode.
2
Press <POWER>.
The power indicator turns off, and so does the power.
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
time or when going on vacation, either press <POWER> to turn off the
power, or unplug the power cord from the power outlet.
Basic connections Basic operation
1.PMA1510AEE2_ENG_002_5th_0222.indd 7 2010/02/23 15:55:17