Operation Manual

o
Sound is distorted or interrupted, or noise occurs
Symptom Cause / Solution Page
Sound is distorted or
interrupted, or noise
occurs.
0
Adjust to an appropriate volume level on this unit and the connected devices. 26
0
Place the device connected via Bluetooth closer to this unit. －
0
Place this unit away from microwaves, wireless LAN devices, etc. －
0
Turn off and on power to Bluetooth devices. －
0
Turn down the volume of the playback device connected to the AUX connector. －
0
Switch “H/P AMP Gain” to “Mid” or “High” if using headphones with high impedance or low sensitivity. －
Sound is interrupted during
playback of music from a
computer.
0
During playback of music from the computer, do not run any applications other than the player software. －
o
Desired sound does not come out
Symptom Cause / Solution Page
No sound comes out of a
specific speaker.
0
Check that speaker cables are properly connected. 17
0
Adjust the BALANCE control knob. 47
The left and right of stereo
sound is reversed.
0
Check whether the left and right speakers are connected to the correct speaker terminals. 18
Contents Connections Playback Setting procedure Tips Appendix
54
Front panel Display Rear panel Remote Index