Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Accessories
- Part names and functions
- Connections
- Playback
- Turning the power on
- Switching the power to standby
- Selecting the input source
- Adjusting the volume
- Turning off the sound temporarily (Muting)
- Adjusting the tone and balance
- Switching the display’s brightness
- Playing CDs
- Connecting and playing back from a computer (USB-DAC)
- Connecting and playing back from a digital device (Coaxial/Optical 1/Optical 2/Optical 3)
- Recording
- Settings
- Tips
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Display on this unit shows nothing
- No sound comes out
- Desired sound does not come out
- Sound is interrupted or noise occurs
- Music files on PC or Mac cannot be played back
- Audio from digital devices cannot be played back (Coaxial/Optical)
- The input source switches to “Optical 1”, “Optical 2”, “Optical 3” or “Coaxial”
- Appendix
.
ANALOG
MODE
BALANCETREBLEBASSX
SOURCE
DIRECT
Power indicator
Input source select knob
AMPLIFIER
X
DIMMER
MUTE
ANALOG MODE
INPUT SELECT
VOLUME
df
Volume knob
Turning the power on
1
Press X on the main unit to turn the power on.
The power indicator lights white.
0
Press AMPLIFIER X on the remote control unit to turn on power from standby
mode.
NOTE
0
Turn volume knob on the main unit to adjust the volume to the lowest level before
turning on the power.
Switching the power to standby
1
Press AMPLIFIER X.
The unit switches to standby mode.
NOTE
0
Power continues to be supplied to some of the circuitry even when the power is in
the standby mode. When leaving home for long periods of time or when going on
vacation, either press X on the main unit to turn off the power, or unplug the power
cord from the power outlet.
Contents Connections Playback Settings Tips Appendix
24
Front panel Rear panel
Remote control
unit
Index