Protocol Specs

- 9 -
EVENT(or RESPONSE) and PARAMETER list
EVENT CHANNEL PARAMETER
function example
PW 00 ON POWER ON/STANDBY change PWON<CR>
STANDBY PWSTANDBY<CR>
SV *01-12 ** CHANNEL VOLUME change , **:00 to 99 by ASCII SV80<CR>
90 = 0dB(MAX)
00 = -90dB
99 = ---(MIN)
SO 02-12(EVEN) NOR OPERATION MODE change SO02NOR<CR>
BRI SO02BRI<CR>
SF *01-12 OFF Channel Low Cut Filter OFF/ON change SF04OFF<CR>
ON SF04ON<CR>
SI *01-12 BUSL Channel INPUT source change SI03BUSL<CR>
BUSR SI03BUSR<CR>
BUSM SI03BUSM<CR>
AUX SI03AUX<CR>
ST 02-12(EVEN) CONT Zone turn on mode change ST06CONT<CR>
TRIG ST06TRIG<CR>
ASIG ST06ASIG<CR>
OFF ST06OFF<CR>
00 PBTN Power configuration change ST00PBTN<CR>
TRIG ST00TRIG<CR>
ONLI ST00ONLI<CR>
SD 00 BRI Dimmer level change SD00BRI<CR>
00 DIM SD00DIM<CR>
00 DAR SD00DAR<CR>
00 OFF SD00OFF<CR>
TI 02-12(EVEN) YES Zone trigger input YES/NO change TI12YES<CR>
NO TI12NO<CR>
00 YES Master trigger input YES/NO change TI00YES<CR>
NO TI00NO<CR>
AI 02-12(EVEN) YES channel audio signal input YES/NO change AI02YES<CR>
NO AI02NO<CR>