SUPER AUDIO CD RECEIVER RCD-CX1 Owner’s Manual Bedienungsanleitung Manuel de l’Utilisateur Manuale delle istruzioni Manual del usuario Gebruiksaanwijzing Bruksanvisning
ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA n SAFETY PRECAUTIONS • DECLARATION OF CONFORMITY CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANCAIS DEUTSCH ENGLISH n NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA ANGÅENDE ANVÄNDNINGEN CAUTION: • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the unit.
ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA CAUTION: To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. VORSICHT: Um dieses Gerät vollständig von der Stromversorgung abzutrennen, ziehen Sie bitte den Stecker aus der Wandsteckdose.
ENGLISH n Contents Getting Started Accessories·······················································································2 Cautions on Handling······································································2 Cautions on Installation··································································2 About Discs······················································································2 Discs Usable on the RCD-CX1························································2 Holding
ENGLISH Getting Started Getting Started Connections Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Setup Accessories Playback Check that the following parts are supplied with the product. Setting the Timer q Remote control (RC-1109)......................................................... 1 w R03/AAA batteries...................................
ENGLISH Dual layer disc Cautions on Loading Discs Hybrid disc Do not touch the signal surface. HD layer CD layer HD layer Figure 1 Figure 2 Outer tray guide Inner tray guide 12 cm disc 8 cm disc NOTE • “00:00” is displayed if a disc that cannot be played is loaded. • “NO DISC” is displayed if the disc is loaded upside-down or if no disc is loaded. • Be sure to remove discs after using them. • Be sure to store discs in their cases to protect them from dust, scratches, warping, etc.
ENGLISH Getting Started About the Remote Control Unit Cleaning Discs Connections • If there are fingerprints or dirt on discs, wipe them off before using the disc. Fingerprints and dirt can impair sound quality and cause interruptions in playback. • Use a commercially available disc cleaning set or a soft cloth to clean discs. Inserting the Batteries q Remove the remote control unit’s rear cover.
ENGLISH Part Names and Functions Getting Started Display e For buttons not explained here, see the page indicated in parentheses ( ).
ENGLISH Getting Started Remote Control Unit Buttons Operable for All Functions (CD, PHONO, TUNER, LINE1, LINE2 and iPod) Buttons Operable When the Function is Set to “CD” The buttons listed at “Buttons Operable for All Functions” can also be used.
ENGLISH Buttons Operable When the Function is Set to “iPod” The buttons listed at “Buttons Operable for All Functions” can also be used. The buttons listed at “Buttons Operable for All Functions” can also be used.
ENGLISH Getting Started Connections Connections Connections for all compatible audio signal format is described in this operating instructions. Please select the types of connections suited for the equipment you are connecting. With some types of connections, certain settings must be made on the RCD-CX1. For details, refer to the instructions for the respective connection items below. Setup NOTE Playback Setting the Timer • Do not plug in the power cord until all connections have been completed.
ENGLISH Connecting the Speaker Cables Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to the RCD-CX1, and be sure to interconnect the channels and polarities correctly. Speakers q w q 4 Turn the speaker terminal clockwise to tighten it. Insert the speaker cable’s core wire to the hilt into the speaker terminal. Setting the Timer Turn the speaker terminal counterclockwise to loosen it.
ENGLISH Getting Started Connecting the Playback Components iPod® Use a DENON control dock for iPod (ASD-1R or ASD-3N/3W, sold separately) to connect the iPod to the RCD-CX1. Connecting a Power Amp and Subwoofer Use when adding a power amp, subwoofer, etc.
ENGLISH Digital connections n When connecting the optical digital output connector with an optical transmission cable (sold separately) CD recorder / MD recorder "6%*0 Analog connections Setup "6%*0 */ 3 R L R L R L R Setting the Timer L Playback Store the protective cap in a safe place so as not to lose it, and use it when not using the terminal. "6%*0 - Match the shapes Remove the protective cap, match the shapes, then insert firmly all the way in.
ENGLISH Getting Started Connections to Other Devices Connecting the Power Cord Wait until all connections have been completed before connecting the power cord. Antenna terminals Connections AM / FM The AM and FM reception sensitivity depends on the place the antenna is set and the direction in which it is set. Set it so that reception is best.
ENGLISH n Checking the current time when the power is on Getting Started n Checking the current time when the power is set to standby Connections Setup Symbols used to indicate buttons in this manual Displaying the time when the power is set to standby consumes electricity. To reduce electric consumption, turn the time display off. The time is displayed. Press and hold in [MENU/SET] to enter time setting mode. “TIME Adj” is displayed for about 2 seconds. Use [2/u] or [8/i] to set the “hours”.
ENGLISH Getting Started Playback Connections Symbols used to indicate buttons in this manual Setup Button located on both the main unit and the remote control unit BUTTON Button only on the main unit
ENGLISH Adjusting the Master Volume Adjusting the Tone 1 Press [PURE DIRECT/TONE] and select the mode you want to adjust. Either turn or press [VOLUME df]. The volume level is displayed. [Variable range] –90.0dB ~ b When lowering the volume from –90.0 dB, the display shows “– –.– dB”. LINE1 (iPod) BASS on ~ +8dB ~ +8dB : Adjusts the treble sound. [Variable range] –8dB Listening with Headphones To cancel, press [MUTE] again.
ENGLISH Getting Started Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit BUTTON Button only on the main unit
ENGLISH During stop, press [REPEAT/RANDOM] until displays of “ “ ”, “ ”, “ ”, “ ” are unlit. Press [REPEAT/RANDOM]. b You can cancel even if you press <2/5> to open the disc tray. [During Stop] OFF (indicator turns off) Random Random Repeat Single-track random repeat When setting is completed, press 1/3 to play. Single-track repeat All-track repeat [Selectable items] : All tracks are played repeatedly. : Tracks are selected and played automatically in random order.
ENGLISH Getting Started Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit BUTTON Button only on the main unit
ENGLISH 1 Press [MODE] and select “Folder Mode” or “Disc Mode”. Use Press , or [CH –/8, to select the file to be played. or . Playback starts. • Folder Use [2/u, 8/i] to select the folder. • File Use <8/–, +/9> or [CH –/8, CH +/9] to select the file, or use [4/o, 6/p] to select the file number. b The file numbers are set automatically when the disc is loaded. FM MONO AM 2 Use [TU –/6, TU +/7] to select the reception band. When a station is received, the “TUNED” indication will light.
ENGLISH Getting Started Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit BUTTON Button only on the main unit
ENGLISH Program Type (PTY) Do not operate any buttons while the time is being updated. If buttons are operated, CT reception is not possible and the time is not updated. Use this function to automatically tune to FM stations that provide the RDS service. Press [TUNER] to select “FM AUTO”. Press [MODE] to select “RDS”. -RDS- -PTY-TP- 3 Press [4/o, 6/p]. Automatically begin the PTY search operation. b If no program of the specified type is found, “NO PROG” is displayed.
ENGLISH Getting Started Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit BUTTON Button only on the main unit
ENGLISH Use [2/u, 8/i] to select the item, then press [5/ENTER] to select the music file to be played. Press [iPod 1/3]. Playback starts. Remote mode NOTE n To cue to the beginning of a track To Switch the Display During playback, press [iPod 1/3]. Press again to resume playback. During playback, either press and hold [CH–/8] or [CH+/9]. During playback, press [CH–/8] or [CH+/9]. n To perform Repeat/Random playback (Browse mode only) During playback, press [TIME/DISPLAY].
ENGLISH Getting Started Setting the Timer Connections Symbols used to indicate buttons in this manual Setup Button located on both the main unit and the remote control unit BUTTON Button only on the main unit
ENGLISH Use [2/u, 8/i] to set the “minutes” for the timer stop time. Function selection Timer ON/OFF 10:00 Timer On time Timer Off time Press [MENU/SET] or [5/ENTER]. n To change the timer settings Use [2/u, 8/i] to turn timer playback on. n To change the setting while setting the timer Once timer Everyday timer 1_ _ / E_ _ OFF OFF 1on / Eon ON ON 1_ _ / Eon OFF ON 1on / E_ _ ON OFF The timer setting is set. NOTE During setting, you can change with <2/5> or [2] up to step 14.
ENGLISH Getting Started Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit BUTTON Button only on the main unit
ENGLISH Getting Started Other Functions Auto Power On When one of the buttons below is pressed, the function switches to the respective function and playback of that source starts. Unplug the power cord. Plug the power cord into a power outlet while pressing and simultaneously. After about 15 seconds “RESET” is displayed to indicate that the microprocessor has been reset.
ENGLISH Getting Started Troubleshooting Connections Setup If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other components operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
ENGLISH Cause • The power is not on. Countermeasure • Turn on the power. • The disc is not properly loaded. • Reload the disc. • A disc other than a CD or Super • Load a CD or Super Audio CD. Audio CD is loaded. 11 15 3, 4 • Program properly. 17 • Finalize the disc then play it. • Use a properly recorded disc. 3 – • Press the 8 or 9 button to select a different file. 19 • Reposition the equipment or the positions or directions of the connection cables, antenna, etc. • Connect an outdoor antenna.
ENGLISH Getting Started Specifications n Receiver section Connections Setup Playback Setting the Timer Other Functions Rated output: High frequency distortion: Output terminals: Equalizer amplifier output (REC OUT terminals): Input sensitivity / Input impedance: RIAA deviation: Reception frequency range: Reception sensitivity: FM channel separation: FM S/N ratio: FM harmonic distortion: S/N ratio: (A-weighted network): Tone co
www.denon.com Denon Brand Company, D&M Holdings Inc.
