RCD-M33-EK 05.4.
RCD-M33-EK 05.4.12 9:12 AM ページ 2 NOTE ON USE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RCD-M33-EK 05.4.12 9:12 AM ページ 3 CAUTION 1 MAIN FEATURES 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. 2. Do not open the top cover In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON DEALER. 3.
RCD-M33-EK 05.4.12 9:12 AM ページ 4 3 CAUTIONS ON INSTALLATION Installing the AM loop antenna Note: For heat dispersal, do not install this equipment in a confined space such as a book case or similar unit. ✽ ✽ Note Tune in an AM station (see page 12) and set the antenna as far from the system as possible to keep distortion and noise is minimal. In some cases, it is best to invert the polarities.
RCD-M33-EK 05.4.12 9:12 AM ページ 5 5 CONNECTIONS (1) Connecting to Cassette deck (DRR-M33) NOTE: • This system includes digital circuitry which may cause interference such as color blotching or changes in the color on TVs. If this happens, move the system and the TV as far apart as possible. Subwoofer Connecting the speaker systems Connect the speaker system for the left channel (the left side as seen from the front) to the L terminals, the speaker system for the right channel to the R terminals.
RCD-M33-EK 05.4.12 9:12 AM ページ 6 (2) Connecting to Cassette deck (DRR-M33) and CD recorder etc. CD recorder etc.
RCD-M33-EK 05.4.12 9:12 AM ページ 7 u 6 PART NAMES AND FUNCTIONS (1) Front Panel !2 !3 !1 !0 o i VOLUME control • Use this to adjust the overall volume (Rotary Encorder System). • The volume increases when the control is turned clockwise (,) and decreases when it is turned counterclockwise (.). • The volume increases and decreases in 35 steps from the minimum (VOLUME 00) to the maximum (VOLUME MAX).
RCD-M33-EK 05.4.12 9:13 AM ページ 8 (2) Rear Panel @6 @5 @4 (3) Display @3 @2 @1 q w e r t y q Segment The selected functions, volume, reception band, reception frequency, RDS data, time, and timer settings are displayed here. w 1/ u o 3 1 (the play indicator) lights when a disc is !4 !5 !6!7 !4 !5 !6 !7 8 !9 !8 AUX IN (analog input) jacks • This is an input terminal. DAB antenna terminal (ANTENNA TERMINAL DAB) (RCD-M35DAB only) • Connect the FM antenna here.
RCD-M33-EK 05.4.12 9:13 AM ページ 9 7 REMOTE CONTROL UNIT (3) Remote Control Unit Part Names and Functions q SLEEP button The RCD-M35DAB/RCD-M33 comes with a system remote control unit (RC-999). • The supplied remote control unit (RC-999) is for use with the RCD-M35DAB/RCD-M33 unit only. • If the cassette deck (DRR-M33) is connected to the main unit, you may operate each of the above components using its respective remote control unit (refer to pages 9,10).
RCD-M33-EK 05.4.12 9:13 AM ページ 10 !0 MENU/ SET button •When pressed in the standby mode, the standby mode is switched (the clock display is switched on and off). •When pressed while the clock is displayed, the manual time setting mode is set. (This cannot be set while the clock is displayed in the standby mode.) •Switches the display of the timer setting menu on and off. •When the function is set to FM and the CT tuning mode is set, the mode switches to the auto time setting mode.
RCD-M33-EK 05.4.12 9:13 AM ページ 11 8 CAUTIONS ON HANDLING DISCS About Compact Discs C Auto tuner presets Only discs with the mark can be played on the RCDM35DAB/RCD-M33. Use compact discs that include the 9 LISTENING TO RADIO PROGRAMS (Check the connections on pages 4, 5.) C mark. CD’s with special shapes (heart-shaped CDs, octagonal CDs etc.) cannot be played on this set. Attempting to do so may damage the set. Do not use such CDs.
RCD-M33-EK 05.4.12 9:13 AM ページ 12 Manual tuning 1 2 1 2 3 4 4 4 Example: Tuning in FM 92.50 MHz (AM stations are tuned in using the same procedure.) 1 2 3 Press the power operation switch to turn on the power. Main unit Remote control unit Main unit Remote control unit Main unit Remote control unit Press the FUNCTION or TUNER button to select TUNER mode. Press the 2 /BAND button on the tuner to select the FM AUTO. Use the Tuning +/– (TU+/ TU–) button to tune the frequency to 92.50.
RCD-M33-EK 05.4.12 9:13 AM ページ 13 Presetting or naming radio stations Listening to Preset Stations (This operation is only possible from the remote control unit.) You can preset up to 40 FM/AM stations. You can name the preset stations (up to 8 characters each). 1 Tune in the desired preset station. 2 Press the EDIT button on the remote control unit. • You can now begin character input. 3 Press the 9 / 8 button until the desired character appears on the display.
RCD-M33-EK 05.4.12 9:13 AM ページ 14 PTY Search TP Search 1 Press the RDS button twice. 1 Press the RDS button 3 times. 2 Press the PTY button to select the type of program. (One of the 29 types listed below can be selected.) 2 Press the TU+( 7 ) or TU–(6) button. (auto tuning) 3 Press the TU+( 7 ) or TU–(6) button. (auto tuning) Reception frequency 3 The station is tuned in. Reception frequency NOTE: “ NO PROGRAM ” is displayed when there is no traffic information broadcast station.
RCD-M33-EK 05.4.12 9:13 AM ページ 15 10 LISTENING TO DAB (Check the connections on pages 4, 5.) Up to 60 DAB stations can be tuned in. Tuning in DAB (Digital Audio Broadcasting) 1 Press the power operation switch to turn on the power. Main unit 2 3 4 1 Follow steps 1 to 6 under “Tuning in DAB (Digital Audio Broadcasting) broadcasts” to tune in the station you want to preset. 2 Use the ENTER/MEMO button to enter the station to be preset.
RCD-M33-EK 05.4.12 9:13 AM ページ 16 Switching the DAB information display 1 DAB Settings Follow steps 1 to 6 under “Tuning in DAB (Digital Audio Broadcasting)” on page 15 to tune in a DAB station. Use the DAB/RDS button to make the DAB settings. Remote control unit Use the TIME/DISPLAY button to switch the DAB reception information on the bottom line of the display.
RCD-M33-EK 05.4.12 9:13 AM ページ 17 11 USING THE TIMER Setting the Current Time The time and timer functions are incorporated in the CD receiver. The time is displayed in the 24-hour mode. 3, 5 Timer Settings 2, 4, 6 Types of timer operations EVERYDAY TIMER : Use this to turn the power on and standby at the same time every day. ONCE TIMER : Use this to turn the power on and standby once.
RCD-M33-EK 05.4.12 9:13 AM ページ 18 Setting the Timer The power can be set to turn on and off at a specific time or at the same time everyday, in any modes: tuner, CD, cassette deck (optional) and timer recording (recording to the cassette deck from the tuner or AUX input). NOTE: • Please do not change the setup function of this unit after performing the timer setup. In the event the setup function is changed, the timer start mode may not start properly.
RCD-M33-EK 05.4.12 9:13 AM ページ 19 15 16 Use the 9 or 8 button to set the minutes for the timer off time. Various Timer Operations Press the MENU/ SET button. Use the 9 or 8 button to select “1_off/E_on”. mark lights. • The Remote control unit 4, 6, 8 4, 6, 8 2 1 Example: Playing a compact disc with the once timer Main unit Remote control unit Press the MENU/ SET button. Press the power operation switch to turn on the power.
RCD-M33-EK 05.4.12 9:13 AM ページ 20 Cancelling the Sleep Timer 7 Press the MENU/ SET button. Main unit 8 Remote control unit Now follow steps 8 to 18 under “Setting the Timer” on page 18. • “The “E” indicating “EVERYDAY” switches to “1” indicating “ONCE”. • Press the MENU/ SET and 9 or 8 button to select “1_on/E_off” and the mark lights in the step 17. Select OFF using the SLEEP button.
RCD-M33-EK 05.4.12 9:13 AM ページ 21 12 PLAYING CDs 2 (stop) button 1/ 3 (play/pause) button Normal Playback 1, 3 4 1/ 3 (play/pause) button 4 Example: Playing a disc containing 15 tracks and with a playing time of 62 minutes, 3 seconds, starting from the first track. 1 Press the 5 (open/close) button to open the disc tray. 2 (stop) button Interrupting playback temporarily 1 Press the 1 / 3 (play/pause) button.
RCD-M33-EK 05.4.12 9:13 AM ページ 22 (3) Playing all the tracks repeatedly …………………………………………………………………… All-track Repeat Various Playback Functions (Using the remote control unit) In addition to the regular playback, the RCD-M35DAB/RCD-M33 also offers the following playback functions: (1) Playing a specific track ……………………………………………………………………………… Direct Search (Using the remote control unit) Example: Playing the 8th track 1 Press the CD button on the remote control unit.
RCD-M33-EK 05.4.12 9:13 AM ページ 23 (4) Playing the tracks in a certain order ……………………………………………………………… Programmed Playback (Using the remote control unit) 1 2 NOTES: • With this CD receiver, you can program up to 25 tracks. • The entire program is canceled when the 5 (open/close) button is pressed. • Set the stop mode when cancelling tracks from the program. To cancel the program mode, press the PROG/DIRECT button. 3 1 Press the PROG/ DIRECT button.
RCD-M33-EK 05.4.12 9:13 AM ページ 24 (7) Finding a certain spot on the disc while listening to the sound …………………………… Skip Monitor (Using the remote control unit) • Use this function to skip through the disc while listening to the sound. • When the desired spot is reached using the skip monitor function, release the manual search forward button ( 7 ) or manual search reverse button ( 6 ) to resume normal playback from that point.
RCD-M33-EK 05.4.12 9:13 AM ページ 25 4 Press the EDIT button on the remote control Example: For a 60-minute tape unit to set the length of the tape. (The length is the total for sides A and B.) • For a 60- minute (C- 60) tape, press the Remote control unit EDIT button 2 times. • The display changes as shown below each time the EDIT button is pressed. (If the tape length has already been set once, the display changes starting from that length.
RCD-M33-EK 05.4.12 9:13 AM ページ 26 13 PLAYING MP3/WMA Normal Playback Listening to Recorded MP3/WMA (Windows Media Audio) CD/CD-R/CD-RW 1 2-q 3 2-w There are many music distribution sites on the internet from which music files in MP3/WMA (Windows Media Audio) audio compression format can be downloaded. Music downloaded as instructed on the site and written onto a CD-R/RW disc can be played on the RCD-M35DAB/RCDM33.
RCD-M33-EK 05.4.12 9:13 AM ページ 27 q File name display Stopping playback Press the 1 / 3 (play/pause) button. Main unit Remote control unit w Title/Artist display The title, artist and album names are scrolled. 3 1 Main unit Remote control unit • Use the TIME/ DISPLAY button to switch the information displayed. Title / Artist File Name e Title/Album display Various Playback Functions Repeat and random playback are also possible for discs containing files in MP3 and/or WMA format.
RCD-M33-EK 05.4.12 9:13 AM ページ 28 3 Use the FOLDER +/ – buttons to select the folder to be repeated. 4 Press the 1/ 3 (play/pause) button to start playback. • • : Only the files in the selected folder are played repeatedly. : All the files on the disc are played repeatedly. Once playback of the last file is finished, playback starts over from the first file on the disc. • : All the files in the selected folder are played repeatedly.
RCD-M33-EK 05.4.12 9:13 AM ページ 29 15 TROUBLESHOOTING 16 SPECIFICATIONS Check the following once more before assuming there is a problem with the system. 1. Are connections proper? 2. Is the system being operated as explained in the operating instructions? If the system does not seem to be operating properly, check as shown on the table below. If none of these checks apply to the problem, the system may be malfunctioning. Disconnect the power cord immediately and contact your store of purchase.
RCD-M33-EK 05.4.
RCD-M33-EK 05.4.
RCD-M33-EK 05.4.12 9:13 AM ページ 32 TOKYO, JAPAN www.denon.com Denon Brand Company, D&M Holdings Inc.