User Guide Guía del usuario Guide d’utilisation Guida per l’uso Benutzerhandbuch Appendix English ( 2 – 6 ) Español ( 7 – 11 ) Français ( 12 – 16 ) Italiano ( 17 – 21 ) Deutsch ( 22 – 26 ) English ( 27 )
User Guide (English) Introduction Box Contents VL12 Prime 45 RPM Adapter Power Cable Headshell Counterweight & Scale Ring User Guide Felt Slipmat Additional Counterweight Safety & Warranty Manual Target Light RCA Stereo Cable Support For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit denondj.com. For additional product support, visit denondj.com/support.
Features Top Panel 4 16 17 15 14 13 5 10 9 11 1 7 12 2 3 6 8 1. Power Switch & Strobe Light: Turn this dial at the top of the strobe light to power VL12 Prime on or off. The strobe light illuminates the edge of the platter, which indicates whether or not the phase of the platter’s rotation is constant. As the platter rotates, look at the vertical lines on its edge under the light’s strobing. If the phase is constant, the lines will appear to be still.
7. Pitch Fader: Move this fader to increase or decrease speed of the platter (and therefore the pitch of the track). In the center position, the pitch is at 0%. Use the Pitch Range button to set the full range of the pitch fader. 8. Pitch Range: Press this button to cycle through the available ranges of the pitch fader: +8%, +16%, and +50%. The lights above the button indicate the current selection. 9.
Side Panels Left Side 1 2 3 1. Torque: Use this switch to set the torque of the platter. At the Hi setting, the platter will have a heavier, stronger feel. At the Lo setting, the platter will feel lighter and more graceful. 2. Platter Color: Turn this knob to set the color of the light around the platter. 3. Platter Brightness: Use this switch to set the brightness of the light around the platter. Right Side 2 3 1 1.
Setup Platter Place the platter onto the motor by aligning the pins in the bottom of the platter with the holes in the motor. Press it down firmly. Check to make sure that it rotates uniformly and does not wobble excessively, and then place the slipmat onto the platter. Important: • Incorrect platter setup can lead to poor turntable performance, platter instability or permanent motor damage. • Make sure that the felt slipmat is always placed on top of the platter while using the turntable.
Guía del usuario (Español) Introducción Contenido de la caja VL12 Prime Adaptador para 45 rpm Cable de corriente Portacápsulas Contrapeso y anillo de escala Guía del usuario Almohadillas antideslizantes de fieltro Contrapeso adicional Luz de iluminación de cabezal Cable RCA estéreo Manual sobre la seguridad y garantía Soporte Para obtener la información más reciente acerca de este producto (documentación, especificaciones técnicas, requisitos de sistema, información de compatibilidad, etc.
Características Panel superior 4 16 17 15 14 13 5 10 9 11 1 7 12 2 3 6 8 1. Interruptor de encendido y luz estroboscópica: Gire este cuadrante en la parte superior de la luz estroboscópica para encender o apagar el VL12 Prime. La luz estroboscópica ilumina el borde del plato, el cual indica si la fase de la rotación del plato es o no constante. A medida que gira el plato, observe las líneas verticales en su borde bajo la luz estroboscópica.
7. Fader de pitch (tono): Mueva este fader para aumentar o disminuir la velocidad del plato (y por lo tanto el pitch de la pista). En la posición central, el pitch está al 0%. Use el botón Pitch Range (rango de pitch) para ajustar el rango completo del fader de pitch. 8. Rango de pitch: Pulse este botón para alternar entre los rangos disponibles del fader de pitch: +8%, +16% y +50%. Las luces encima del botón indican la selección actual. 9.
Paneles laterales Lado izquierdo 1 2 3 1. Torque: Use este interruptor para ajustar el torque del plato. En el ajuste Hi, el plato se sentirá más pesado y fuerte. En el ajuste Lo, el plato se sentirá más liviano y ágil. 2. Color del plato: Gire esta perilla para seleccionar el color de la luz alrededor del plato. 3. Brillo del plato: Use este interruptor para seleccionar el brillo de la luz alrededor del plato. Lado derecho 2 3 1 1.
Instalación Plato Coloque el plato en el motor alineando los pernos de la parte inferior del plato con los orificios del motor. Presiónelo firmemente. Asegúrese de que gire de manera uniforme y sin tambalear en exceso y coloque la almohadilla antideslizante sobre el plato. Importante: • La instalación incorrecta del plato puede causar el mal funcionamiento del giradiscos, la inestabilidad del plato o un daño permanente al motor.
Guide d’utilisation (Français) Présentation Contenu de la boîte VL12 Prime Adaptateur pour 45 t/min Câble d’alimentation Coquille Contrepoids et molette de réglage Guide d’utilisation Tapis en feutrine Contrepoids supplémentaire Lumière de plateau Câble RCA audio Consignes de sécurité et informations concernant la garantie Assistance Pour les toutes dernières informations concernant la documentation, les spécifications techniques, la configuration requise, la compatibilité et l’enregistrement du
Caractéristiques Panneau supérieur 4 16 17 15 14 13 5 10 9 11 1 7 12 2 3 6 8 1. Interrupteur d’alimentation et lumière stroboscopique : Le bouton au-dessus de la lumière stroboscopique permet la mise sous et hors tension de la platine VL12 Prime. Ce témoin illumine le rebord du plateau, indiquant si la phase de la rotation du plateau est constante. Lorsque le plateau tourne, regardez les lignes verticales sur le rebord sous la lumière stroboscopique.
6. Lumière de plateau : La lumière de plateau (inclus) illumine les sillons du disque afin que vous puissiez suivre l’emplacement de la pointe de lecture dans les environnements plus sombres. Pour l’activer, fixez-la à ce connecteur. Pour l’arrêter, retirez-la de ce connecteur. Remarque : Pour éviter tout dommage durant le transport de la VL12 Prime, nous vous recommandons de retirer la lumière de plateau. 7.
Panneaux latéraux Panneau gauche 1 2 3 1. Couple : Ce commutateur permet d’ajuster le niveau de couple du plateau. Un réglage plus élevé (Hi) donne l’impression que le plateau est plus lourd. Un réglage plus bas (Lo) donne l’impression que le plateau est plus léger et plus gracieux. 2. Couleur du plateau : Tournez ce bouton pour sélectionner la couleur de la lumière autour du plateau. 3. Luminosité du plateau : Ce commutateur permet d’ajuster la luminosité de la lumière autour du plateau.
Installation Plateau Placez le plateau sur le moteur en alignant les broches du fond du plateau avec les trous du moteur. Appuyez fermement. Vérifiez qu’il tourne uniformément et qu’il ne vacille pas excessivement, puis placez le tapis sur le plateau. Important : • Une mauvaise installation du plateau peut entraîner une piètre performance de la platine, l’instabilité du plateau, ou causer des dommages permanents au moteur.
Guida per l’uso (Italiano) Introduzione Contenuti della confezione VL12 Prime Adattatore 45 giri Cavo di alimentazione Fonorilevatore Contrappeso e l’anello graduato Guida per l’uso Tappetino in feltro Contrappeso supplementare Istruzioni di sicurezza e garanzia Luce target Cavo RCA stereo Assistenza Per le ultime informazioni in merito a questo prodotto (documentazione, specifiche tecniche, requisiti di sistema, informazioni sulla compatibilità, ecc.
Caratteristiche Pannello superiore 4 16 17 15 14 13 5 10 9 11 1 7 12 2 3 6 8 1. Interruttore di alimentazione e luce stroboscopica: girare questa manopola posta sulla luce stroboscopica per accendere o spegnere il VL12 Prime. La luce stroboscopica illumina il bordo del piatto, cosa che indica se la fase della rotazione del piatto è costante o meno. Mentre il piatto gira, osservarele linee verticali sul bordo sotto lo strobo della luce. Se la fase è costante, le linee saranno ferme.
7. Fader del pitch: muovere questo fader per aumentare o ridurre la velocità del piatto (e di conseguenza il pitch della traccia). In posizione centrale, il pitch è di 0%. Servirsi del tasto Pitch Range per impostare l’intervallo completo del fader del pitch. 8. Gamma del pitch: premere questo tasto per commutare tra gli intervalli disponibili del fader del pitch: +8%, +16% e +50%. Le spie accese sopra al tasto indicano la selezione corrente. 9.
Pannelli laterali Lato sinistro 1 2 3 1. Coppia: servirsi di questo interruttore per regolare la coppia del piatto. All’impostazione massima Hi, il piatto darà una sensazione più forte e pesante. All’impostazione minima Lo, il piatto sembrerà più leggero e aggraziato. 2. Colore del piatto: girare questa manopola per selezionare il colore delle luci attorno al piatto. 3. Luminosità del piatto: servirsi di questo interruttore per impostare la luminosità delle luci attorno al piatto. Lato destro 2 3 1 1.
Configurazione Piatto Collocare il piatto sul motore allineando i perni a livello della parte inferiore del piatto con i fori nel motore. Premerlo verso il basso con decisione. Assicurarsi che ruoti uniformemente e non oscilli eccessivamente, quindi collocare il tappetino sul piatto. Importante: • Una configurazione scorretta del piatto può portare a scarse prestazioni del giradischi, instabilità del piatto o danni permanenti al motore.
Benutzerhandbuch (Deutsch) Einführung Lieferumfang VL12 Prime 45-RPM-Adapter Stromkabel Tonabnehmerkopf Gegengewicht und Skalenring Benutzerhandbuch Filz-Slipmat Zusätzliche Gegengewicht Plattenlicht Stereo-Cinch-Kabel Sicherheitshinweise und Garantieinformationen Kundendienst Für die neuesten Informationen zu diesem Produkt (Dokumentation, technische Daten, Systemanforderungen, Informationen zur Kompatibilität etc.) und zur Produktregistrierung besuchen Sie bitte: denondj.com.
Funktionen Oberseite 4 16 17 15 14 13 5 10 9 11 1 7 12 2 3 6 8 1. Netzschalter und Stroboskoplicht: Drehen Sie diesen Regler am oberen Teil des Stroboskoplichts, um das VL12 Prime ein- oder auszuschalten. Das Stroboskoplicht beleuchtet die Plattentellerkante, an der zu erkennen ist, ob die Rotationsgeschwindigkeit des Plattentellers konstant ist. Beobachten Sie die vertikalen Linien an der Kante unter dem Stroboskoplicht, wenn sich der Plattenteller dreht.
7. Pitch-Fader: Bewegen Sie diesen Regler, um die Geschwindigkeit des Plattentellers (und damit die Tonhöhe des Tracks) zu erhöhen oder zu verringern. In der Mittelposition liegt die Tonhöhe bei 0%. Verwenden Sie die Taste Pitch-Range, um den vollen Bereich des Pitch-Faders einzustellen. 8. Pitch-Range: Drücken Sie diese Taste, um durch die verfügbaren Bereiche des PitchFaders zu blättern: +8%, +16% oder +50%. Die Lichter über der Taste zeigen die aktuelle Auswahl an. 9.
Seitenteile Linke Seite 1 2 3 1. Drehmoment: Mit diesem Schalter wird das Drehmoment des Plattentellers eingestellt. In der Einstellung Hi fühlt sich der Plattenteller schwerer und stärker an. In der Einstellung Lo fühlt sich der Plattenteller leichter an. 2. Plattentellerfarbe: Mit diesem Regler stellen Sie die Farbe des Lichts rund um den Plattenteller ein. 3. Plattentellerhelligkeit: Verwenden Sie diesen Schalter, um die Helligkeit des Lichts rund um den Plattenteller einzustellen.
Setup Plattenteller Legen Sie die Plattenteller auf den Motor, indem Sie die Stifte an der Unterseite des Plattentellers mit den Löchern im Motor ausrichten. Drücken Sie den Teller fest nach unten. Stellen Sie sicher, dass er sich gleichmäßig dreht und nicht zu stark wackelt. Legen Sie dann die Slipmat auf den Plattenteller. Wichtig: • Eine unsachgemäße Montage des Plattentellers kann zu schlechter Wiedergabe, Instabilität oder sogar permanenten Motorschäden führen.
Appendix (English) Technical Specifications Motor Drive Quartz direct-drive Torque High: 5.0 kgf/cm (starting/instant); 3.4 kgf/cm (stable) Low: 3.2 kgf/cm (starting/instant); 1.4 kgf/cm (stable) Platter Tonearm Speeds Starting Time < 0.4 seconds Braking System Electronic Material Aluminum die-cast Diameter 13.1” / 332 mm Weight 4.9 lbs. / 2.2 g Effective Length 9.4” / 238 mm Overhang 1.0” / 25 mm Offset Angle 20.5° 33⅓, 45 RPM < 0.
Manual Version 1.