Operation Manual

5
Side Panels
Left Side
1
2
3
1. Torque: Use this switch to set the torque of the platter. At the Hi setting, the platter will
have a heavier, stronger feel. At the Lo setting, the platter will feel lighter and more graceful.
2. Platter Color: Turn this knob to set the color of the light around the platter.
3. Platter Brightness: Use this switch to set the brightness of the light around the platter.
Right Side
1
2
3
1. Power Input: Use the included power adapter to connect this input to a power outlet, and
then power on the unit.
2. Phono Outs (RCA): Connect these outputs to the phono inputs of your mixer.
3. Grounding Terminal: If you hear a low “hum” or “buzz” in your record’s audio signal, this
could mean that VL12 Prime is not grounded. In that case, use a grounding wire to
connect this terminal to the grounding terminal of your mixer.