User manual

Gateway Pro
iPod, USB, Bluetooth
User Manual
Volkswagen CAN (VC1)
v.1.0
GWP-9201-1
1. INTRODUCTION
The Dension Gateway Pro lets you connect
your iPod or USB storage (stick, hard drive or
mass storage capable mp3 player) to your
original car radio, providing music playback,
menu based control and charging.
The Gateway Pro offers Bluetooth connectivity
for music streaming (via A2DP) and handsfree
mobile call handling via the original buttons and
screens of your vehicle.
Supported USB devices
USB: Flash Memory and Hard Disk Drive
(UBS1.1 and higher)
File System: FAT16 or FAT32
Storage capacity: up to 320 GB music content
Music Format: MP3, WMA and WAV, OGG
Supported iPod / iPhone devices
iPod (4
th
generation)
iPod nano (1
st
, 2
nd
, 3
rd
, 4
th
, 5
th
and 6
th
generation)
iPod mini
iPod Photo 4G
iPod Video 5G
iPod Classic
iPod Touch (1
st
, 2
nd
, 3
rd
and 4
th
generation)
iPhone, iPhone 3G / 3GS, iPhone 4 / 4S
Aux: 3.5mm stereo aux input (optional)
2. GETTING STARTED
Switch on your car radio and select CD charger
by pressing the CD button (you may need to
press the CD button twice for this, depending on
the status of the radio).
Connect your iPod or USB storage to the
Gateway. It will start playing the first song on the
device. If the Gateway has been in use earlier,
music will play from your iPod or USB from
where it stopped previously.
When switching off the radio the playback will
stop and the source devices will go to stand-by if
the ignition key is removed.
You can pair the Gateway Pro with a Bluetooth
capable mobile phone for music streaming
(requires an A2DP capable phone) or handsfree
use (if that option is active in the Gateway).
Pairing is controlled from the mobile phone the
same way as connecting to other Bluetooth
accessories. The pin code to the Gateway Pro is
0000 (for further details please read Section 4).
Accessing the Menu
The menu of the Gateway Pro is displayed on
the central display (cluster) on the dashboard
(between the two main instruments). Due to the
capabilities of your car, the Gateway Pro menu is
not visible on the radio screen.
3. OPERATION
The menu can be selected and controlled from
the steering wheel control or via the stalk control,
whichever is available.
You can navigate to the menu of the Gateway
Pro with the Menu button on the steering wheel
or by first a long press of the Up button on the
stalk control to access the top menu of the car
and then navigating to the Gateway screens by
the Up / Down buttons. There are two main
screens: the audio- and the phone screens.
Browsing is possible by the Up / Down buttons, a
short press of OK enters the menu and a long
press of OK returns to the previous level in the
menu.
Selecting the Music Source
You can select the music source for playback in
the Source Menu. This can be:
GW AUX*: the analogue Aux input of the
Gateway. No control function is available.
AUX can be used if Connector Port
(EXT1CP2) or AUX cable (CABL-AUX) is
connected
BT Audio: from a paired A2DP streaming
capable phone. The playback is controlled
from the phone or with the Next and Back
buttons of your car (phone dependent).
Please note: This feature is disabled by
default. It can be enabled from the Settings
menu
iPod UI: the playback is controlled from the
iPod
iPod GW: the playback is controlled from
the Gateway (the click wheel of the iPod
gets disabled)
USB: the playback is controlled from the
Gateway
The connected devices are marked with asterix
on the screen.
*
Additional accessory is required
Browsing and Selecting Music (iPod or USB)
You can use the other menu items to browse the
content of the iPod / iPhone or USB device.
Files, Artists, Albums, Titles, Bookmarks
(for USB only): Provides browsing and
selecting the music files on your USB
device
Music (for iPod only): Allows browsing and
selecting music in the sub-menus: Artists,
Albums, Titles, Genres, Composers,
Audiobooks, Podcasts
Browsing is possible by the next and back
buttons and selecting a directory or menu item by
pressing the OK button.
The ALL menu lists all the songs from the given
artists. The albums from the artist are listed as
separate items afterwards.
When an album is selected, the PLAY menu item
starts the playback of the album and the
particular songs get listed afterwards for
selection.
The following menu items provide specific
functions for music playback:
Play All: plays all the music from the
selected source. The playback starts from
the actual playback position and continues
sequentially
Album play: Plays the full album of the
song being played, typically used when in
random play mode
Random play can be accessed by pressing the
mix button on the radio.
Settings menu
Hotkey function
You can assign the CD selector buttons
(between 2-6) to the desired folder e.g. album,
song or menu position.
Select the Set CD option in the Hotkey
menu (* icon will appear beside the ‘Set’)
Navigate to the desired menu or music item

Summary of content (2 pages)