User's Manual
NISSAN MOTOR CO.,LTD. Draft
6
Off System is idle
Green – On Solid Phone in use
Green – Blinking When an incoming call is ringing
Amber – On Solid
No wireless signal available. Outside of coverage
area.
Amber – Blinking When vehicle is turned on and system is performing a
self-check
Red – On Solid System is malfunctioning and needs to be taken to
your Infiniti Dealer
DISPLAY ICONS
The following Icons will be visible on the multi-function display whenever the Infiniti
Communicator is active
• Picture No service
• Picture Voice mail (indicates there is unread voice mail)
• Picture Antenna strength
• Picture Roaming
• Picture In use for an active call
• Picture Analog service
• Picture Digital service
•
Picture Phone
• Picture Information
• Picture Emergency
There will also be a text message displayed on your screen for the following conditions
• Network busy
• Signal faded
• Redialing (in the case of a dropped call)
• Name or number of selected onboard phone book entry when scrolling or dialing
Ringer On/Off: To turn off the ringer press and hold the END button for three seconds.
After the ringer is turned off, it can be turned on again by pressing and holding the END
button for three seconds or cycling the ignition from the off to the start/on position. The
ringer volume will then be set to the prior level before it was turned off. Alternatively, the
ringer can be turned up upon arrival of an incoming call by the volume switch on the
steering wheel or the volume knob on the radio. This method can also be used to turn the
volume down.
Roaming: The roaming icon (insert icon) will be illuminated on the display when you are
outside the primary wireless service provider’s network. While initiating a call in a
roaming area, a voice message will alert you that you are roaming. Complete coverage
maps can be found on www.infiniti.com. Additional charges may be applied to your call