INFORMATION In the following conditions, the system may not function. @ The cellular phone js turned off. © The current position is outside the communication area. © The cellular phone is not connected. @ The cellular phone has a low bat troy. 174 By pushing the telephone bunion above, you can receive a call or hang up with out taking your hands off the steering wheel. I 05/08/26 | You can use the microphone above when talking on the phone.
) The other parley's voice outputs from the driver's speaker. Wuhan the received calls or received voice outputs, the audio from the audio system wilt be muted. INFORMATION © Talk alternately with the other party on the phone. # you talk at the same time, the voice may not reach each other. (it is not a malfunction son) © Keep the volume of receiving voice down. Otherwise, echo is coming up. When you task on the phone, speak clearly towards the microphone.
i : INFORMATION This system supports the following service. & HEP {Hands fern Profile) Ver. 1.6 @ OPP {Object Push Profile) Ver. 1.1 if your alleluia phone does net sup.
“This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF} Exposure Guidelines in Supplement C to MOET. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation {MPEG.
} | LEE Ee ron Sharpish | 4. Touch the “Bluetooth” switch to dis 5, Touch the “Hester” switch to con. play the “Bluetooth Settings” screen. cent your cellular phone fo the sys. tem. 178 7 05/08/26 6. When this screen is displayed, input the Passkey displayed on the screen into the phone.
J aE Pha clerk the Pa say and! 27F186 27P187 7. When the connection is completed, this screen is displayed. guidance on the screen to try again You do not need to enter the phone in case of using the same one 05/08/26 When this screen is displayed, follow the @ Connecting a Bluetooth phone When you register your phone, auto connection wolf be turned on. Always set it to this mode and leave the Blue tooth phone in a condition where connection can be established.
When the “ACC” or *IF-ON" mode is enabled, the selected Bluetooth phone will be automatically connected and the connection result is displayed. This screen appears when the Bluetooth phone is first connected after the "ACC" or 1-ON" mode is enabled. 180 {b} manually When the ate connection failed or turned off, you have to connect Bluetooth manually. | a Touch the “Connect” switch after having enabled the Bluetooth connection on the phone.
# Reconnecting the Bluetooth phone if the Bluetooth phone is disconnected with a poor reception from the Blue. tooth network when the “ACC” or “ion" mode is enabled, the system automatically reconnects the Bluetooth phone. In this case, the connection result is not displayed. if the Bluetooth is disconnected on pur pose such as you turned your cellular phone off, this does not happen Recon cent it by the following methods, © Select the Bluetooth phone again.
{i} By phone book You can call by phone book data which is transferred from your cellular phone. The system has one phone book. You can register up to 1000 numbers. This cannot ba operated while you are driving. | | | 27P195 SAT | 27194 Ena { 2. Select the desired number from the i ET list. | Gia BTR Touch the desired key to input the tel phone number, 1. Touch the “Phone Book” switch to display “Phone Book” screen.
You can call by dialed number. The system memorizes up to 5 dialed numbers. If it is over 5, the oldest number is deleted. This cannot be operated while you are driving. [ER iii) By dialed numbers | i | ZTPI97 tad ares 27P198 © When you call registered. fist. 1, Touch the “Call Log” switch to display “Outgoing Calls” screen. 05/08/26 by phone book, name {if registered) is displayed ® When you call the same number con tenuously, only the newest number is ™ i the 2.
{iv) By received calls You can Cali by received calls. When a call is received, the system memo. sizer up to § numbers. ¥ it is over 5, the oldest number is deleted. This cannot be operated while you are driving cn 278196 1. Touch the “Call Log” switch to dis. play. 184 277199 Ea ALR CRT 27P200 2. Touch the “Incoming Calls” switch to display “Incoming Calls” screen. 05/08/26 © When a telephone number registered in the phone book is received, the name and the number are displayed.
| ! Touch “FH” or push the & bunion of the | steering wheel. © An international phone call may not be made depending on the cellular phone which you java {v} By speed dial You can call by registered telephone number which you selected from a phone book, dialed numbers and received calls, (See page 192 for registering the speed dial.) ere 1. Touch the “Speed Dial” switch to display “Speed Dial” screen. 05/08/26 Touch the desired number to call. You can change the page by touch.
{vi} By voice recognition Example: Call Charlie Sie perm en 4 i 27P208 | You can call by giving a command. (For the operation and command of voice recognition, see “Speech Command System” on page 236 and “Help screen” on page 238.) & Dialing by name You can call by giving a voice tag registered in the phone book. For setting the voice recognition, see “Setting the voice recognition” on page 211, 186 05/08/26 | You: Push the talk switch, System: “After the esp, please say the name.
{ i : Canceling the voice recognition @ Dialing by phone number The voice recognition will be canceled You can call by giving a desired whence you do tha following. ber. © Keep on pushing the talk switch. © Push the &3 bunion of the steering wheel. ® Touch the “Cancel” switch. (Except for recognizing the command) © Say “Cancel”. “Next” is displayed when multiple entries are found for a searched name. Up to 6 entries can be displayed including the first searched one.
You: System: You: System: You: System: You! System, Now you 188 Push the talk switch, “After the beep, please say the number.” "812387" “When ready, please briefly push the talk switch or push the of-hook switch to dial” Push the talk switch. “After the bap, please continue to add numbers or say "Dial". “Dial.” “Dialing the number.” can call 812387. © Sending a phone You can send a tone by giving a desired number.
{c) Receiving on the Bluetooth phone When a call is received, this screen is displayed with a sound. Touch “FEF or push the &3 button of the steering wheel to talk on the phone. To hang up the phone: Touch “BE]" or push the i button of the steering wheal again To refuse to receive the call Touch “EB” and hold it.
input a Key: Touch the 0-9" switch To transfer the call Touch the “Transfer Call" switch. You cannot change from hands-free call to cellular phone call while you are div. ing. When you change from cellular phone call to hands-free call, the hands-free screen will ba displayed and you can operate it on the screen, Transferring method and behavior are different depending on the cellular phone which you have. For the operation of ihe phone, ses the manual halt comes with your cellular phone.
You ean do this operation when you want @ Sending a tone by the speed tone ee to operate an answering machine or use a telephone service in bank for example. (mu registering the speed phone, seo You can register the phone number end preregistering fhe speed phone” on page the code number in the phone book. 196) You can send a tone by the speed tons. rE dR ees SNE ar ERE 2. Touch the desired switch to send 2 tone. 1. Touch the “Speed Tone” switch. 191 .
{e) Changing the settings of the Bluetooth phone Patty Touch the “Settings” switch to display “Settings” screen. 192 2 a: FRR. Hons Bork Lhe 27F214 You can change the settings of the phone, 05/08/26 (i) (a) Registering the speed dial You can register the desired telephone number from phone book, dated numbers and received calls. Up to 17 speed dial numbers can be registered. The 6th entry is the speed dial for redialing. 27P215 1. Touch the “Speed Dial” switch to display the “Speed Dial Settings” screen.
hE [Loan Sas Boss TEL 27P216 27P218 | 2. Touch the “Register” switch of 3. Select the data you want lo register. 4. Touch the desired telephone number. | “Speed Dial”.
LTP 27F220 5. Touch the switch you want to register in. The latest dialed number is registered in the 6th item (speed redial). 194 05/08/26 6. If you select a switch you registered before, this screen is displayed, Touch the “Yes” switch if you want to overwrite it. + © Deleting the speed fiat individually You can delete “01” “17” of the speed dial individually, if you delete them all at once, all of 17 numbers are deleted. Cee i 1. Touch the “Delete” switch of “Speed Dial”.