User's Manual

3
English
Cell phones registered in the main unit can be
connected.
a
b
Select the cell phone to be connected and
then touch [Connect].
cWhen the connection has been completed,
"Completed" will appear on the display.
● The cell phone is now connected to the main
unit.
a
a On the hands-free screen, touch numbers
between [0] and [9] to input the phone
number.
• Touch [Clear] to erase digits one at a time.
b Touch [ ] when you have input the
phone number.
b
● The input phone number is dialed.
a
a Touch [ ] while the phone is ringing.
• A phone connection is made, and you can start
talking.
b Touch [ ] on the dialing screen.
• The call will be disconnected.
a
b
On the PhoneSetting screen, touch the
setting switch for each item to perform the
following settings.
Auto Answer :
Automatic call answering can be set.
Ringtone :
The ring tone can be set.
Auto Connect :
Registered cell phones can be connected to
the main unit automatically.
SP Select :
The speakers that output the sound for
hands-free can be configured.
Change Code :
The PIN CODE can be changed by touching
[Change Code].
Connecting a cell phone
ATTENTION
If connection is not successful, "FAILED" will appear
on the display. When this happens, perform the
connection procedure again.
Making a call
a
b
Answering a phone call / Hanging
up (Refusing a call)
Various settings of the hands-free
function
b
a
temp 2.fm 3 ページ ２００８年１２月１８日 木曜日 午前１１時５５分