User's Manual

386

3-3. Using the Display Audio system

Making a call

Once the Bluetooth

phone is registered, you can make a call using

the following procedure:

■ Dialing

Display the “Telephone” screen. (→P. 381)

Input the phone number.

To delete the inputted phone

number, touch

For the first digit, you can enter

“+” by touching “

∗” for a while.

Press on the steering wheel or touch .

■ Reconnecting to the Bluetooth

phone

Vehicles without a smart entry & start system:

If the system cannot connect due to poor signal strength with the engine

switch in the “ACC” or “ON” position, the system will automatically attempt to

reconnect.

Vehicles with a smart entry & start system:

If the system cannot connect due to poor signal strength with the “ENGINE

START STOP” switch in ACCESSORY or IGNITION ON mode, the system

will automatically attempt to reconnect.

If the phone is turned off, the system will not attempt to reconnect. In this

case, connection must be made manually, or the phone must be re-selected.

■ Connecting the phone while Bluetooth

audio is playing

● Bluetooth

audio will stop temporarily.

● It may take time to connect.

STEP