User's Manual

Adjusting the LCD contrast
You can adjust the LCD contrast to eight levels.
(1) Use the 1 key (or M1 or M2 key) to select the LCD CONTRAST line.
(2) To make the contrast low, press the M1 key with the SF key held
down; to make it high, press the M2 key with the SF key held down.
Switching the beeper & vibrator
You may choose any of three ways—beeping only, vibrating only, or beeping
& vibrating as a confirmation of completion of code reading.
(1) Use the 2 key (or M1 or M2 key) to select the BEEPER VIBRATION
line that will be highlighted in any one of the following three states:
(2) Highlight the desired way(s) by using the M1 or M2 key while holding
down the SF key.
Adjusting the beeper volume
You can adjust the beeper volume to four levels from OFF to MAX.
(1) Use the 3 key (or M1 or M2 key) to select the BEEPER VOLUME line.
(2) To turn down the volume, press the M1 key with the SF key held
down; to turn it up, press the M2 key with the SF key held down.
Adjusting the beeper volume to be sounded when you touch
the touch screen
You can adjust the volume of the beeper to be sounded when you touch the
touch screen, to three levels from OFF to MAX.
(1) Use the 4 key (or M1 or M2 key) to select the VOLUME line.
(2) To turn down the volume, press the M1 key with the SF key held
down; to turn it up, press the M2 key with the SF key held down.
SF + M2 SF + M2
SF + M1 SF + M1